From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 8/9] usb: phy: am335x: call usb_gen_phy_init()/usb_gen_phy_shutdown() in am335x_init()/am335x_shutdown()
Date: Tue, 22 Jul 2014 09:47:43 -0500 [thread overview]
Message-ID: <20140722144743.GB20588@saruman.home> (raw)
In-Reply-To: <20140722100613.779a3e11@ipc1.ka-ro>
On Tue, Jul 22, 2014 at 10:06:13AM +0200, Lothar Wa?mann wrote:
> Hi,
>
> Felipe Balbi wrote:
> > Hi,,
> >
> > On Mon, Jul 21, 2014 at 10:03:07AM +0200, Lothar Wa?mann wrote:
> > > Hi,
> > >
> > > > On Fri, Jul 18, 2014 at 11:31:29AM +0200, Lothar Wa?mann wrote:
> > > > > This patch makes it possible to use the musb driver with HW that
> > > > > requires external regulators or clocks.
> > > >
> > > > can you provide an example of such HW ? Are you not using the internal
> > > > PHYs ?
> > > >
> > > The Ka-Ro electronics TX48 module uses the mmc0_clk pin as VBUSEN
> > > rathern than usb0_drvvbus. This patch makes it possible to use an
> > > external regulator to handle the VBUS switch through the 'vcc-supply'
> > > property of the underlying generic_phy device.
> >
> > OK, I get it now. But why would not use usb0_drvvbus ? You could still
> > route usb0_drvvbus to the regulator enable pin and the regulator would
> > be enabled for you once correct values are written to the IP's mailbox.
> >
> > I suppose this has something to do with layout constraints ?
> >
> Yes. The usb0_drvvbus is used for a different purpose.
alright, thanks for the info. I'll revisit this in a few days, quite
busy right now and my tree is closed for v3.17 anyway.
cheers
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140722/191cc982/attachment-0001.sig>
next prev parent reply other threads:[~2014-07-22 14:47 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-18 9:31 [PATCH 0/9] usb: musb: several bugfixes for the musb driver Lothar Waßmann
2014-07-18 9:31 ` [PATCH 1/9] usb: musb: core: cleanup - remove some useless 'break's from switch statements Lothar Waßmann
2014-07-18 9:31 ` [PATCH 2/9] usb: phy: am335x: group the #includes by subdirs Lothar Waßmann
2014-07-18 9:31 ` [PATCH 3/9] usb: musb_am335x: source cleanup Lothar Waßmann
2014-07-18 9:31 ` [PATCH 4/9] usb: phy: am335x-control: prevent module from being unloaded when in use Lothar Waßmann
2014-07-18 9:31 ` [PATCH 5/9] usb: musb: print error message with dev_err() instead of dev_dbg() Lothar Waßmann
2014-07-18 9:31 ` [PATCH 6/9] usb: musb: core: properly setup the HW before registering it to the USB core Lothar Waßmann
2014-07-18 9:31 ` [PATCH 7/9] usb: phy: am335x: setup the gen_phy function pointers _before_ adding the phy Lothar Waßmann
2014-07-18 9:31 ` [PATCH 8/9] usb: phy: am335x: call usb_gen_phy_init()/usb_gen_phy_shutdown() in am335x_init()/am335x_shutdown() Lothar Waßmann
2014-07-18 9:31 ` [PATCH 9/9] usb: musb: musb_am335x: reinstate module loading/unloading support Lothar Waßmann
2014-07-18 14:04 ` Felipe Balbi
2014-07-22 7:49 ` Lothar Waßmann
2014-07-22 14:47 ` Felipe Balbi
2014-07-18 13:57 ` [PATCH 8/9] usb: phy: am335x: call usb_gen_phy_init()/usb_gen_phy_shutdown() in am335x_init()/am335x_shutdown() Felipe Balbi
2014-07-21 8:03 ` Lothar Waßmann
2014-07-21 15:10 ` Felipe Balbi
2014-07-22 8:06 ` Lothar Waßmann
2014-07-22 14:47 ` Felipe Balbi [this message]
2014-07-18 13:54 ` [PATCH 7/9] usb: phy: am335x: setup the gen_phy function pointers _before_ adding the phy Felipe Balbi
2014-07-18 13:52 ` [PATCH 6/9] usb: musb: core: properly setup the HW before registering it to the USB core Felipe Balbi
2014-07-18 13:50 ` [PATCH 5/9] usb: musb: print error message with dev_err() instead of dev_dbg() Felipe Balbi
2014-07-18 13:50 ` [PATCH 4/9] usb: phy: am335x-control: prevent module from being unloaded when in use Felipe Balbi
2014-07-18 13:45 ` [PATCH 3/9] usb: musb_am335x: source cleanup Felipe Balbi
2014-07-18 13:45 ` [PATCH 2/9] usb: phy: am335x: group the #includes by subdirs Felipe Balbi
2014-07-18 13:44 ` [PATCH 1/9] usb: musb: core: cleanup - remove some useless 'break's from switch statements Felipe Balbi
2014-07-18 16:16 ` [PATCH 0/9] usb: musb: several bugfixes for the musb driver Ezequiel Garcia
2014-07-18 16:50 ` Felipe Balbi
2014-07-21 7:34 ` Lothar Waßmann
2014-07-21 15:11 ` Felipe Balbi
2014-07-21 15:53 ` Ezequiel Garcia
2014-07-21 15:58 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140722144743.GB20588@saruman.home \
--to=balbi@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).