From: mfuzzey@parkeon.com (Martin Fuzzey)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: i.MX53: Add Soc specific PMU setup.
Date: Tue, 29 Jul 2014 14:33:03 +0200 [thread overview]
Message-ID: <20140729123303.13347.12389.stgit@localhost> (raw)
In-Reply-To: <20140729123256.13347.79778.stgit@localhost>
On i.MX53 it is necessary to set the DBG_EN bit in the
platform GPC register to enable access to PMU counters other
than the cycle counter.
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
---
arch/arm/mach-imx/mach-imx53.c | 55 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 54 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 2bad387..b2cc235 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -19,16 +19,69 @@
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/pmu.h>
#include "common.h"
#include "hardware.h"
#include "mx53.h"
+#include "crm-regs-imx5.h"
+
+#define GPC_DBG_EN (1 << 16)
+
+static void imx53_pmu_start(struct arm_pmu *arm_pmu)
+{
+ unsigned long flags;
+ struct pmu_hw_events *events = arm_pmu->get_hw_events();
+ u32 gpc;
+
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+ gpc = __raw_readl(MXC_CORTEXA8_PLAT_GPC);
+ if (gpc & GPC_DBG_EN) {
+ events->activated_flags &= ~ARM_PMU_ACTIVATED_PLATFORM;
+ } else {
+ gpc |= GPC_DBG_EN;
+ __raw_writel(gpc, MXC_CORTEXA8_PLAT_GPC);
+ events->activated_flags |= ARM_PMU_ACTIVATED_PLATFORM;
+ }
+
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static void imx53_pmu_stop(struct arm_pmu *arm_pmu)
+{
+ unsigned long flags;
+ struct pmu_hw_events *events = arm_pmu->get_hw_events();
+ u32 gpc;
+
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
+
+ if (events->activated_flags & ARM_PMU_ACTIVATED_PLATFORM) {
+ gpc = __raw_readl(MXC_CORTEXA8_PLAT_GPC);
+ gpc &= ~GPC_DBG_EN;
+ __raw_writel(gpc, MXC_CORTEXA8_PLAT_GPC);
+ events->activated_flags &= ~ARM_PMU_ACTIVATED_PLATFORM;
+ }
+
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static struct arm_pmu_platdata imx53_pmu_platdata = {
+ .start = imx53_pmu_start,
+ .stop = imx53_pmu_stop,
+};
+
+static struct of_dev_auxdata imx53_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("arm,cortex-a8-pmu", 0, "arm-pmu", &imx53_pmu_platdata),
+ {}
+};
static void __init imx53_dt_init(void)
{
mxc_arch_reset_init_dt();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table,
+ imx53_auxdata_lookup, NULL);
}
static const char *imx53_dt_board_compat[] __initconst = {
next prev parent reply other threads:[~2014-07-29 12:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-29 12:32 [PATCH 0/4] ARM: perf: Support i.MX53 Martin Fuzzey
2014-07-29 12:32 ` [PATCH 1/4] ARM: perf: Set suniden bit Martin Fuzzey
2014-07-29 12:33 ` [PATCH 2/4] ARM: perf: Add platform specific start/stop callbacks Martin Fuzzey
2014-07-29 12:33 ` Martin Fuzzey [this message]
2014-07-29 12:33 ` [PATCH 4/4] ARM: dts: i.MX53: Add PMU DT entry Martin Fuzzey
2014-07-29 12:52 ` [PATCH 0/4] ARM: perf: Support i.MX53 Will Deacon
2014-07-29 16:40 ` Martin Fuzzey
2014-07-30 10:46 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140729123303.13347.12389.stgit@localhost \
--to=mfuzzey@parkeon.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).