[PATCH] spi: rockchip: return 0 if tx_buf and rx_buf are NULL

[PATCH] spi: rockchip: return 0 if tx_buf and rx_buf are NULL

[Addy Ke]

To do so, spi communication can use an empty buf to pull up CS.

This patch merged from ChromiumOS tree.
Cros_ec use this function to turn off CS and add a delay to ensure
the rising edge doesn't come too soon after the end of the data.

Tested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
---
 drivers/spi/spi-rockchip.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 72fb287..1e3bcfa 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -511,8 +511,8 @@ static int rockchip_spi_transfer_one(struct spi_master *master,
 	WARN_ON((readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY));
 
 	if (!xfer->tx_buf && !xfer->rx_buf) {
-		dev_err(rs->dev, "No buffer for transfer\n");
-		return -EINVAL;
+		dev_dbg(rs->dev, "No buffer for transfer\n");
+		return 0;
 	}
 
 	rs->speed = xfer->speed_hz;
-- 
1.8.3.2

[PATCH] spi: rockchip: return 0 if tx_buf and rx_buf are NULL

[Dmitry Torokhov]

Hi Addy,

On Thu, Aug 14, 2014 at 08:52:24AM +0800, Addy Ke wrote:
> To do so, spi communication can use an empty buf to pull up CS.
> 
> This patch merged from ChromiumOS tree.
> Cros_ec use this function to turn off CS and add a delay to ensure
> the rising edge doesn't come too soon after the end of the data.
> 
> Tested-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Addy Ke <addy.ke@rock-chips.com>
> ---
>  drivers/spi/spi-rockchip.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
> index 72fb287..1e3bcfa 100644
> --- a/drivers/spi/spi-rockchip.c
> +++ b/drivers/spi/spi-rockchip.c
> @@ -511,8 +511,8 @@ static int rockchip_spi_transfer_one(struct spi_master *master,
>  	WARN_ON((readl_relaxed(rs->regs + ROCKCHIP_SPI_SR) & SR_BUSY));
>  
>  	if (!xfer->tx_buf && !xfer->rx_buf) {
> -		dev_err(rs->dev, "No buffer for transfer\n");
> -		return -EINVAL;
> +		dev_dbg(rs->dev, "No buffer for transfer\n");
> +		return 0;
>  	}

Maybe we should only return 0 if xfer->len is also 0, otherwise keep
complaining loudly?

	if (!xfer->tx_buf && !xfer->rx_buf) {
		if (xfer->len == 0)
			return 0;

		dev_err(rs->dev, "Missing transfer buffer\n");
		return -EINVAL;
	}

Thanks.

-- 
Dmitry

[PATCH] spi: rockchip: return 0 if tx_buf and rx_buf are NULL

[Mark Brown]

On Thu, Aug 14, 2014 at 08:52:24AM +0800, Addy Ke wrote:
> To do so, spi communication can use an empty buf to pull up CS.

> This patch merged from ChromiumOS tree.
> Cros_ec use this function to turn off CS and add a delay to ensure
> the rising edge doesn't come too soon after the end of the data.

>  	if (!xfer->tx_buf && !xfer->rx_buf) {
> -		dev_err(rs->dev, "No buffer for transfer\n");
> -		return -EINVAL;
> +		dev_dbg(rs->dev, "No buffer for transfer\n");
> +		return 0;
>  	}

We should be implementing this in the core rather than the driver - just
not even call into the controller driver if there's nothing to do.  That
way we make sure that every driver works properly.  After all, the delay
itself is implemented in the core.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140814/19f8f028/attachment.sig>