From: shawn.guo@freescale.com (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: imx6: edmqmx6: change enet reset pin
Date: Mon, 18 Aug 2014 14:43:19 +0800 [thread overview]
Message-ID: <20140818064316.GF2114@dragon> (raw)
In-Reply-To: <76f23118ec2c07696aefd4fd88133f42837d45a5.1407765032.git.silvio.fricke@gmail.com>
On Mon, Aug 11, 2014 at 03:53:11PM +0200, Silvio Fricke wrote:
> Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
> ---
> arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
Applied, thanks.
>
> diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
> index 8c1cb53..4fa2543 100644
> --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
> +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
> @@ -119,7 +119,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_enet>;
> phy-mode = "rgmii";
> - phy-reset-gpios = <&gpio3 23 0>;
> + phy-reset-gpios = <&gpio1 25 0>;
> phy-supply = <&vgen2_1v2_eth>;
> status = "okay";
> };
> @@ -339,6 +339,7 @@
> MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
> MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
> MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
> >;
> };
> --
> 2.0.3
>
prev parent reply other threads:[~2014-08-18 6:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-11 13:53 [PATCH] edmqmx6: enet reset pin bugfix Silvio Fricke
2014-08-11 13:53 ` [PATCH] ARM: dts: imx6: edmqmx6: change enet reset pin Silvio Fricke
2014-08-18 6:43 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140818064316.GF2114@dragon \
--to=shawn.guo@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox