From: catalin.marinas@arm.com (Catalin Marinas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/18] ARM64 / ACPI: Parse FADT table to get PSCI flags for PSCI init
Date: Mon, 18 Aug 2014 15:27:21 +0100 [thread overview]
Message-ID: <20140818142721.GR20043@localhost> (raw)
In-Reply-To: <1407166105-17675-6-git-send-email-hanjun.guo@linaro.org>
On Mon, Aug 04, 2014 at 04:28:12PM +0100, Hanjun Guo wrote:
> There are two flags: PSCI_COMPLIANT and PSCI_USE_HVC. When set,
> the former signals to the OS that the hardware is PSCI compliant.
Actually it signals that the firmware is PSCI compliant. The hardware
doesn't care much.
> diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
> index 6400312..6e04868 100644
> --- a/arch/arm64/include/asm/acpi.h
> +++ b/arch/arm64/include/asm/acpi.h
> @@ -19,6 +19,18 @@ extern int acpi_disabled;
> extern int acpi_noirq;
> extern int acpi_pci_disabled;
>
> +/* 1 to indicate PSCI 0.2+ is implemented */
> +static inline bool acpi_psci_present(void)
> +{
> + return !!(acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_COMPLIANT);
> +}
> +
> +/* 1 to indicate HVC must be used instead of SMC as the PSCI conduit */
> +static inline bool acpi_psci_use_hvc(void)
> +{
> + return !!(acpi_gbl_FADT.arm_boot_flags & ACPI_FADT_PSCI_USE_HVC);
> +}
Do we actually need !! here? Shouldn't the compiler figure out
conversion to bool automatically?
> diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
> index 9cf9127..69a315d 100644
> --- a/arch/arm64/kernel/acpi.c
> +++ b/arch/arm64/kernel/acpi.c
> @@ -11,6 +11,8 @@
> * published by the Free Software Foundation.
> */
>
> +#define pr_fmt(fmt) "ACPI: " fmt
> +
> #include <linux/init.h>
> #include <linux/acpi.h>
> #include <linux/cpumask.h>
> @@ -47,6 +49,26 @@ void __init __acpi_unmap_table(char *map, unsigned long size)
> early_memunmap(map, size);
> }
>
> +static int __init acpi_parse_fadt(struct acpi_table_header *table)
> +{
> + struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table;
> +
> + /*
> + * Revision in table header is the FADT Major version,
> + * and there is a minor version of FADT which was introduced
> + * by ACPI 5.1, we only deal with ACPI 5.1 or higher version
> + * to get arm boot flags, or we will disable ACPI.
> + */
> + if (table->revision < 5 || fadt->minor_revision < 1) {
If we ever get revision 6.0, this would trigger.
> diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
> index 85c6326..dfc4e4f3 100644
> --- a/arch/arm64/kernel/setup.c
> +++ b/arch/arm64/kernel/setup.c
> @@ -395,6 +395,8 @@ void __init setup_arch(char **cmdline_p)
> efi_idmap_init();
>
> cpu_logical_map(0) = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
> + acpi_boot_init();
> +
> unflatten_device_tree();
Unless that's changed in a subsequent patch, do we still need to call
unflatten_device_tree() if ACPI was successful?
> psci_init();
I would also rename this to something like psci_dt_init() and move the
acpi_disabled check here rather than in the callee.
--
Catalin
next prev parent reply other threads:[~2014-08-18 14:27 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-04 15:28 [PATCH v2 00/18] Introduce ACPI for ARM64 based on ACPI 5.1 Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 01/18] ARM64: Move the init of cpu_logical_map(0) before unflatten_device_tree() Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 02/18] ARM64 / ACPI: Get RSDP and ACPI boot-time tables Hanjun Guo
2014-08-18 18:30 ` Sudeep Holla
2014-08-19 9:35 ` Hanjun Guo
2014-08-19 9:47 ` Sudeep Holla
2014-08-04 15:28 ` [PATCH v2 03/18] ARM64 / ACPI: Introduce lowlevel suspend function Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 04/18] ARM64 / ACPI: Make PCI optional for ACPI on ARM64 Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 05/18] ARM64 / ACPI: Parse FADT table to get PSCI flags for PSCI init Hanjun Guo
2014-08-18 14:27 ` Catalin Marinas [this message]
2014-08-19 3:50 ` Hanjun Guo
2014-08-19 11:10 ` Mark Rutland
2014-08-19 12:13 ` Hanjun Guo
2014-08-19 22:55 ` Moore, Robert
2014-08-20 4:12 ` Hanjun Guo
2014-08-18 18:32 ` Sudeep Holla
2014-08-19 10:39 ` Hanjun Guo
2014-08-19 11:07 ` Sudeep Holla
2014-08-04 15:28 ` [PATCH v2 06/18] ARM64 / ACPI: Parse MADT to map logical cpu to MPIDR and get cpu_possible/present_map Hanjun Guo
2014-08-18 14:27 ` Catalin Marinas
2014-08-19 7:36 ` Hanjun Guo
2014-08-20 14:38 ` Catalin Marinas
2014-08-21 2:51 ` Hanjun Guo
2014-08-18 18:33 ` Sudeep Holla
2014-08-19 11:00 ` Hanjun Guo
2014-08-19 16:46 ` [Linaro-acpi] " Zi Shen Lim
2014-08-20 3:24 ` Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 07/18] ACPI / table: Print GIC information when MADT is parsed Hanjun Guo
2014-08-07 1:41 ` Zheng, Lv
2014-08-07 10:28 ` Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 08/18] ARM64 / ACPI: Get the enable method for SMP initialization in ACPI way Hanjun Guo
2014-08-18 14:27 ` Catalin Marinas
2014-08-19 8:32 ` Hanjun Guo
2014-08-20 14:52 ` Catalin Marinas
2014-08-21 3:06 ` Hanjun Guo
2014-08-18 18:34 ` Sudeep Holla
2014-08-19 11:26 ` Hanjun Guo
2014-08-18 18:56 ` Geoff Levand
2014-08-19 12:11 ` Hanjun Guo
2014-08-19 19:25 ` Geoff Levand
2014-08-20 3:25 ` Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 09/18] ACPI / processor: Make it possible to get CPU hardware ID via GICC Hanjun Guo
2014-08-18 14:27 ` Catalin Marinas
2014-08-19 8:37 ` Hanjun Guo
2014-08-20 14:56 ` Catalin Marinas
2014-08-21 3:25 ` Hanjun Guo
2014-08-18 18:34 ` Sudeep Holla
2014-08-19 11:29 ` Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 10/18] ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi Hanjun Guo
2014-08-18 18:34 ` Sudeep Holla
2014-08-19 11:36 ` Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 11/18] ACPI / table: Add new function to get table entries Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 12/18] ARM64 / ACPI: Add GICv2 specific ACPI boot support Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 13/18] ARM64 / ACPI: Parse GTDT to initialize arch timer Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 14/18] ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 15/18] ARM64 / ACPI: Introduce early_param for "acpi" and set ACPI default off Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 16/18] ARM64 / ACPI: If we chose to boot from acpi then disable FDT Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 17/18] ARM64 / ACPI: Enable ARM64 in Kconfig Hanjun Guo
2014-08-18 14:27 ` Catalin Marinas
2014-08-19 8:38 ` Hanjun Guo
2014-08-04 15:28 ` [PATCH v2 18/18] Documentation: ACPI for ARM64 Hanjun Guo
2014-08-04 20:48 ` Randy Dunlap
2014-08-05 3:36 ` Hanjun Guo
[not found] ` <CAJRNFK+UfJhGR65tOecy=X+YdHQHiNPZ4p_p8LUxhRL3GW5gFw@mail.gmail.com>
2014-08-05 3:34 ` [Linaro-acpi] [PATCH v2 00/18] Introduce ACPI for ARM64 based on ACPI 5.1 Hanjun Guo
2014-08-18 17:08 ` Alexander Spyridakis
2014-08-18 18:11 ` Graeme Gregory
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140818142721.GR20043@localhost \
--to=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).