From: thierry.reding@gmail.com (Thierry Reding)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] pwm: rockchip: Allow polarity invert on rk3288
Date: Tue, 19 Aug 2014 09:18:58 +0200 [thread overview]
Message-ID: <20140819071857.GD12859@ulmo> (raw)
In-Reply-To: <1408381749-14156-3-git-send-email-dianders@chromium.org>
On Mon, Aug 18, 2014 at 10:09:07AM -0700, Doug Anderson wrote:
[...]
> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
> #define PWM_LP_DISABLE (0 << 8)
>
> @@ -32,6 +34,7 @@ struct rockchip_pwm_chip {
> struct pwm_chip chip;
> struct clk *clk;
> const struct rockchip_pwm_data *data;
> + enum pwm_polarity polarity;
Why do you need this field? struct pwm_device already has a copy of it.
> @@ -74,10 +78,14 @@ static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
> {
> struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
> u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
> - PWM_CONTINUOUS | PWM_DUTY_POSITIVE |
> - PWM_INACTIVE_NEGATIVE;
> + PWM_CONTINUOUS;
> u32 val;
>
> + if (pc->polarity == PWM_POLARITY_INVERSED)
> + enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE;
> + else
> + enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE;
I have a feeling you're going to answer the above question with: "Because
it's needed here". If so, my reply would be: "Then this function should
take a struct pwm_device instead of struct pwm_chip."
> @@ -173,6 +195,7 @@ static const struct rockchip_pwm_data pwm_data_v2 = {
> .ctrl = 0x0c,
> },
> .prescaler = 1,
> + .has_invert = 1,
Since has_invert is a boolean, the proper value here would be "true".
> @@ -228,6 +252,10 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
> pc->data = id->data;
> pc->chip.dev = &pdev->dev;
> pc->chip.ops = &rockchip_pwm_ops;
> + if (pc->data->has_invert) {
> + pc->chip.of_xlate = of_pwm_xlate_with_flags;
> + pc->chip.of_pwm_n_cells = 3;
> + }
> pc->chip.base = -1;
> pc->chip.npwm = 1;
I suggest to rewrite the above as follows for readability:
pc->data = id->data;
pc->chip.dev = &pdev->dev;
pc->chip.ops = &rockchip_pwm_ops;
pc->chip.base = -1;
pc->chip.npwm = 1;
+
+ if (pc->data->has_invert) {
+ pc->chip.of_xlate = of_pwm_xlate_with_flags;
+ pc->chip.of_pwm_n_cells = 3;
+ }
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140819/51892853/attachment.sig>
next prev parent reply other threads:[~2014-08-19 7:18 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-18 17:09 [PATCH 0/4] PWM changes for rk3288-evb Doug Anderson
2014-08-18 17:09 ` [PATCH 1/4] ARM: rockchip: rk3288: Switch to use the proper PWM IP Doug Anderson
2014-08-18 17:11 ` Sonny Rao
2014-08-18 17:19 ` Doug Anderson
2014-08-19 7:10 ` Thierry Reding
2014-08-19 15:18 ` Doug Anderson
2014-08-20 6:08 ` Thierry Reding
2014-08-20 15:20 ` Doug Anderson
2014-08-20 15:38 ` Thierry Reding
2014-08-20 15:55 ` Doug Anderson
2014-08-20 16:20 ` Heiko Stübner
2014-08-20 16:27 ` Doug Anderson
2014-08-20 18:03 ` Heiko Stübner
2014-08-20 20:49 ` Doug Anderson
2014-08-21 6:36 ` Thierry Reding
2014-08-21 15:38 ` Doug Anderson
2014-08-21 15:49 ` Tomasz Figa
2014-08-21 16:49 ` Thierry Reding
2014-08-21 16:47 ` Thierry Reding
2014-08-25 23:40 ` Doug Anderson
2014-08-26 7:31 ` Thierry Reding
2014-08-21 6:24 ` Thierry Reding
2014-08-21 15:39 ` Doug Anderson
2014-08-21 15:53 ` Heiko Stübner
2014-08-18 17:09 ` [PATCH 2/4] pwm: rockchip: Allow polarity invert on rk3288 Doug Anderson
2014-08-19 7:18 ` Thierry Reding [this message]
2014-08-19 16:05 ` Doug Anderson
2014-08-20 6:09 ` Thierry Reding
2014-08-18 17:09 ` [PATCH 3/4] ARM: dts: Add main PWM info to rk3288 Doug Anderson
2014-08-18 17:09 ` [PATCH 4/4] ARM: dts: Enable pwm backlight on rk3288-EVB Doug Anderson
2014-08-19 7:22 ` Thierry Reding
2014-08-19 16:05 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140819071857.GD12859@ulmo \
--to=thierry.reding@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).