[PATCH 00/11] ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers

[PATCH 00/11] ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers

[Soren Brinkmann]

Hi,

I went through the defconfig and searched for Zynq drivers. The result is
this series of patches. The first few are all for Zynq and pretty much
straight forward. The second half is mostly soft-IP, I think. That
soft-IP works with Zynq devices, but I'm not sure whether those should
go into the multi_v7 defconfig.

	Soren

Soren Brinkmann (11):
  ARM: multi_v7_defconfig: Enable Zynq cpuidle driver
  ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver
  ARM: multi_v7_defconfig: Enable XADC driver
  ARM: multi_v7_defconfig: Enable Zynq SPI driver
  ARM: multi_v7_defconfig: Enable Zynq GPIO driver
  ARM: multi_v7_defconfig: Enable Xilinx I2C driver
  ARM: multi_v7_defconfig: Enable Xilinx SPI driver
  ARM: multi_v7_defconfig: Enable Xilinx GPIO driver
  ARM: multi_v7_defconfig: Enable Xilinx VDMA driver
  ARM: multi_v7_defconfig: Enable Xilinx emaclite driver
  ARM: multi_v7_defconfig: Enable Xilinx watchdog timer

 arch/arm/configs/multi_v7_defconfig | 11 +++++++++++
 1 file changed, 11 insertions(+)

-- 
2.0.1.1.gfbfc394

[PATCH 01/11] ARM: multi_v7_defconfig: Enable Zynq cpuidle driver

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 5fb95fb758d9..4c248348411c 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -86,6 +86,7 @@ CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
 CONFIG_NEON=y
+CONFIG_ARM_ZYNQ_CPUIDLE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-- 
2.0.1.1.gfbfc394

[PATCH 02/11] ARM: multi_v7_defconfig: Enable Zynq/Xilinx CAN driver

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 4c248348411c..50a5f8197fab 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -107,6 +107,7 @@ CONFIG_CAN=y
 CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
 CONFIG_CAN_DEV=y
+CONFIG_CAN_XILINXCAN=y
 CONFIG_CAN_MCP251X=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
-- 
2.0.1.1.gfbfc394

[PATCH 03/11] ARM: multi_v7_defconfig: Enable XADC driver

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 50a5f8197fab..b3ae79b2bc0a 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -382,6 +382,7 @@ CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_MEMORY=y
 CONFIG_IIO=y
+CONFIG_XILINX_XADC=y
 CONFIG_AK8975=y
 CONFIG_PWM=y
 CONFIG_PWM_TEGRA=y
-- 
2.0.1.1.gfbfc394

[PATCH 04/11] ARM: multi_v7_defconfig: Enable Zynq SPI driver

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index b3ae79b2bc0a..4d648e0a42b7 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -207,6 +207,7 @@ CONFIG_I2C_SIRF=y
 CONFIG_I2C_TEGRA=y
 CONFIG_I2C_ST=y
 CONFIG_SPI=y
+CONFIG_SPI_CADENCE=y
 CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
-- 
2.0.1.1.gfbfc394

[PATCH 05/11] ARM: multi_v7_defconfig: Enable Zynq GPIO driver

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 4d648e0a42b7..5cc1c837f8cd 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -222,6 +222,7 @@ CONFIG_PINCTRL_PALMAS=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_ZYNQ=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_TWL4030=y
-- 
2.0.1.1.gfbfc394

[PATCH 06/11] ARM: multi_v7_defconfig: Enable Xilinx I2C driver

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 5cc1c837f8cd..68a4c6b04f2b 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -207,6 +207,7 @@ CONFIG_I2C_SIRF=y
 CONFIG_I2C_TEGRA=y
 CONFIG_I2C_ST=y
 CONFIG_SPI=y
+CONFIG_I2C_XILINX=y
 CONFIG_SPI_CADENCE=y
 CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_ORION=y
-- 
2.0.1.1.gfbfc394

[PATCH 07/11] ARM: multi_v7_defconfig: Enable Xilinx SPI driver

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 68a4c6b04f2b..d37aafa7c0f5 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -218,6 +218,7 @@ CONFIG_SPI_SUN6I=y
 CONFIG_SPI_TEGRA114=y
 CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
+CONFIG_SPI_XILINX=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
 CONFIG_GPIO_SYSFS=y
-- 
2.0.1.1.gfbfc394

[PATCH 08/11] ARM: multi_v7_defconfig: Enable Xilinx GPIO driver

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index d37aafa7c0f5..e696c5784579 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -224,6 +224,7 @@ CONFIG_PINCTRL_PALMAS=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_XILINX=y
 CONFIG_GPIO_ZYNQ=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
-- 
2.0.1.1.gfbfc394

[PATCH 09/11] ARM: multi_v7_defconfig: Enable Xilinx VDMA driver

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index e696c5784579..2aa2c5b4bd7e 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -371,6 +371,7 @@ CONFIG_IMX_SDMA=y
 CONFIG_IMX_DMA=y
 CONFIG_MXS_DMA=y
 CONFIG_DMA_OMAP=y
+CONFIG_XILINX_VDMA=y
 CONFIG_STAGING=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_ISL29028=y
-- 
2.0.1.1.gfbfc394

[PATCH 10/11] ARM: multi_v7_defconfig: Enable Xilinx emaclite driver

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 2aa2c5b4bd7e..ddb8a070ba6f 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -148,6 +148,7 @@ CONFIG_R8169=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
 CONFIG_TI_CPSW=y
+CONFIG_XILINX_EMACLITE=y
 CONFIG_AT803X_PHY=y
 CONFIG_MARVELL_PHY=y
 CONFIG_ICPLUS_PHY=y
-- 
2.0.1.1.gfbfc394

[PATCH 11/11] ARM: multi_v7_defconfig: Enable Xilinx watchdog timer

[Soren Brinkmann]

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ddb8a070ba6f..7105f06f8dfb 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -245,6 +245,7 @@ CONFIG_ARMADA_THERMAL=y
 CONFIG_ST_THERMAL_SYSCFG=y
 CONFIG_ST_THERMAL_MEMMAP=y
 CONFIG_WATCHDOG=y
+CONFIG_XILINX_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
 CONFIG_MFD_AS3722=y
-- 
2.0.1.1.gfbfc394

[PATCH 00/11] ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers

[Olof Johansson]

On Fri, Aug 22, 2014 at 08:54:25AM -0700, Soren Brinkmann wrote:
> Hi,
> 
> I went through the defconfig and searched for Zynq drivers. The result is
> this series of patches. The first few are all for Zynq and pretty much
> straight forward. The second half is mostly soft-IP, I think. That
> soft-IP works with Zynq devices, but I'm not sure whether those should
> go into the multi_v7 defconfig.

Thanks, S?ren! 

There's no need to split up into individual patches like this, but it was
convenient in case I wanted to only apply a few of them. I took them all
as one patch, and used your series description as commit message since
none of the individual patches had any. :)

As far as "unusual" drivers in the multiconfig; yeah, we need to deal
with that at some point due to kernel size. We're likely to switch ti
using modules first, but it'll make things slightly more complicated
since people will need to start dealing with initrds and at least I
don't have a good setup for that in my test farm yet. :-)


-Olof

[PATCH 00/11] ARM: multi_v7_defconfig: Enable Zynq/Xilinx drivers

[Sören Brinkmann]

On Fri, 2014-08-22 at 09:17PM -0700, Olof Johansson wrote:
> On Fri, Aug 22, 2014 at 08:54:25AM -0700, Soren Brinkmann wrote:
> > Hi,
> > 
> > I went through the defconfig and searched for Zynq drivers. The result is
> > this series of patches. The first few are all for Zynq and pretty much
> > straight forward. The second half is mostly soft-IP, I think. That
> > soft-IP works with Zynq devices, but I'm not sure whether those should
> > go into the multi_v7 defconfig.
> 
> Thanks, S?ren! 
> 
> There's no need to split up into individual patches like this, but it was
> convenient in case I wanted to only apply a few of them. I took them all
> as one patch, and used your series description as commit message since
> none of the individual patches had any. :)

Yeah, that was my thinking. It's easier to squash things than splitting.
Thanks for taking it.

> 
> As far as "unusual" drivers in the multiconfig; yeah, we need to deal
> with that at some point due to kernel size. We're likely to switch ti
> using modules first, but it'll make things slightly more complicated
> since people will need to start dealing with initrds and at least I
> don't have a good setup for that in my test farm yet. :-)

I agree. Monolithic kernels make those things a lot easier.

	Thanks,
	S?ren