linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: shawn.guo@freescale.com (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] ARM: dts: hummingboard: gpio-ir on gpio 3,5
Date: Thu, 28 Aug 2014 16:42:47 +0800	[thread overview]
Message-ID: <20140828084246.GF28777@dragon> (raw)
In-Reply-To: <20140827184354.GA30401@n2100.arm.linux.org.uk>

On Wed, Aug 27, 2014 at 07:43:54PM +0100, Russell King - ARM Linux wrote:
> On Sat, Aug 23, 2014 at 12:02:05PM -0300, Fabio Estevam wrote:
> > On Sat, Aug 23, 2014 at 11:33 AM, Russell King - ARM Linux
> > <linux@arm.linux.org.uk> wrote:
> > 
> > > Most of the pins not associated with booting the kernel are left
> > > unconfigured by the boot loader - that's because uboot SPL has very
> > > little space for such things.
> > >
> > > Rabeeh has just told me that 0x1b0b1 would be a better value for it.
> > > I'll add an additional patch to the series for that, rather than
> > > modifying Rabeeh's original patch.
> > 
> > Sounds good, thanks.
> 
> Right, here's the patch to make that change.  Shawn, can you pick this
> one up as well please?
> 
> Thanks.
> 
> 8<===
> From 5cebff8f6232fbafde7af564eca61447f951040e Mon Sep 17 00:00:00 2001
> From: Russell King <rmk+kernel@arm.linux.org.uk>
> Date: Sat, 23 Aug 2014 15:34:07 +0100
> Subject: [PATCH] ARM: dts: hummingboard: fix configuration of IR input
> 
> Add the IOMUX setting for the IR input, rather than relying on the
> boot loader.
> 
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Applied, thanks.

Shawn

> ---
>  arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
> index 4aa0ae357b00..7fe29de89e9d 100644
> --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
> @@ -130,7 +130,7 @@
>  
>  		pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 {
>  			fsl,pins = <
> -				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x80000000
> +				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
>  			>;
>  		};
>  
> -- 
> 1.8.3.1
> 
> 
> 
> -- 
> FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up
> according to speedtest.net.
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2014-08-28  8:42 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-23  9:10 [PATCH 0/6] SolidRun Hummingboard/Cubox-i DT updates Russell King - ARM Linux
2014-08-23  9:11 ` [PATCH 1/6] ARM: dts: microsom-ar8035: MDIO pad must be set open drain Russell King
2014-08-24  9:44   ` Iain Paton
2014-08-24  9:58     ` Russell King - ARM Linux
2014-08-25  6:53       ` Eric Bénard
2014-08-26 12:08       ` Iain Paton
2014-08-26 10:15     ` Shawn Guo
2014-08-26 12:16       ` Iain Paton
2014-08-23  9:11 ` [PATCH 2/6] ARM: dts: hummingboard/cubox-i: add USB OC pinctrl configuration Russell King
2014-08-23  9:11 ` [PATCH 3/6] ARM: dts: hummingboard/cubox-i: change SPDIF output to be more descriptive Russell King
2014-08-23  9:11 ` [PATCH 4/6] ARM: dts: hummingboard: Split HummingBoard DT to support s/dl and d/q Russell King
2014-08-23  9:11 ` [PATCH 5/6] ARM: dts: hummingboard: add mSATA support for iMX6 quad/dual HummingBoard Russell King
2014-08-23  9:11 ` [PATCH 6/6] ARM: dts: hummingboard: gpio-ir on gpio 3,5 Russell King
2014-08-23 13:32   ` Fabio Estevam
2014-08-23 13:36     ` Russell King - ARM Linux
2014-08-23 13:56       ` Fabio Estevam
2014-08-23 14:33         ` Russell King - ARM Linux
2014-08-23 15:02           ` Fabio Estevam
2014-08-27 18:43             ` Russell King - ARM Linux
2014-08-28  8:42               ` Shawn Guo [this message]
2014-08-25  6:29 ` [PATCH 0/6] SolidRun Hummingboard/Cubox-i DT updates Shawn Guo
2014-08-25  9:51   ` Russell King - ARM Linux
2014-08-25 11:19     ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140828084246.GF28777@dragon \
    --to=shawn.guo@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).