[PATCH 0/5] rtc: at91sam9: add DT support

[boris.brezillon@free-electrons.com (Boris BREZILLON)]

On Wed,  3 Sep 2014 10:45:29 +0200
Boris BREZILLON <boris.brezillon@free-electrons.com> wrote:

> Hello,
> 
> This patch series adds DT support to the atmel at91sam9 RTC driver.
> 
> It also removes any machine specific inclusions to prepare the migration
> to multi platform kernel support, and retain the slow clock to prevent
> the CCF from disabling it at the end of boot.

Oops, just noticed there already was a proposal adding DT support to
this driver [1].
Adding Johan and Douglas in Cc.

[1]http://lists.infradead.org/pipermail/linux-arm-kernel/2013-April/160453.html

> 
> Best Regards,
> 
> Boris
> 
> Boris BREZILLON (5):
>   rtc: at91sam9: remove references to mach specific headers
>   rtc: at91sam9: use standard readl/writel functions instead of raw
>     versions
>   rtc: at91sam9: add DT support
>   rtc: at91sam9: retain slow clock and check its rate
>   rtc: at91sam9: add DT bindings documentation
> 
>  .../devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 20 +++++++
>  drivers/rtc/rtc-at91sam9.c                         | 63 +++++++++++++++++++---
>  2 files changed, 75 insertions(+), 8 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> 



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com