From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Fri, 5 Sep 2014 14:30:09 -0700 Subject: [PATCH 07/10] ARM: OMAP5 / DRA7: Enable CPU RET on suspend In-Reply-To: <20140905211558.GA31011@kahuna> References: <1408716154-26101-1-git-send-email-nm@ti.com> <1408716154-26101-8-git-send-email-nm@ti.com> <7hbnr5dake.fsf@paris.lan> <53FE2BF2.3020006@ti.com> <20140827194156.GE16006@atomide.com> <53FE34D7.7040004@ti.com> <53FE3551.2080806@ti.com> <20140905211558.GA31011@kahuna> Message-ID: <20140905213009.GB3238@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * Nishanth Menon [140905 14:16]: > On 14:45-20140827, Nishanth Menon wrote: > > On 08/27/2014 02:43 PM, Santosh Shilimkar wrote: > > > On Wednesday 27 August 2014 03:41 PM, Tony Lindgren wrote: > > >> * Nishanth Menon [140827 12:05]: > > >>> On 08/27/2014 01:58 PM, Kevin Hilman wrote: > > >>>> Nishanth Menon writes: > > >>>> > > >>>>> From: Rajendra Nayak > > >>>>> > > >>>>> On OMAP5 / DRA7, prevent a CPU powerdomain OFF and resulting MPU OSWR > > >>>>> and instead attempt a CPU RET and side effect, MPU RET in suspend. > > >>>>> > > >>>>> Signed-off-by: Rajendra Nayak > > >>>>> [nm at ti.com: update to do save_state only on DRA7] > > >>>>> Signed-off-by: Nishanth Menon > > >>>>> --- > > >>>>> arch/arm/mach-omap2/omap-mpuss-lowpower.c | 4 ++++ > > >>>>> arch/arm/mach-omap2/omap-wakeupgen.c | 2 +- > > >>>>> arch/arm/mach-omap2/pm44xx.c | 9 +++++++-- > > >>>>> 3 files changed, 12 insertions(+), 3 deletions(-) > > >>>>> > > >>>>> diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c > > >>>>> index 207fce2..0d640eb 100644 > > >>>>> --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c > > >>>>> +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c > > >>>>> @@ -242,6 +242,10 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) > > >>>>> save_state = 1; > > >>>>> break; > > >>>>> case PWRDM_POWER_RET: > > >>>>> + if (soc_is_omap54xx() || soc_is_dra7xx()) { > > >>>> > > >>>> Aren't we trying to get away from these soc_* checks for anything other > > >>>> than init code? > > >>> > > >>> I would expect that to take place in stages as part of which the next > > >>> level of cleanup is to move PRM into drivers. Currently our wakeupgen, > > >>> prm code does have quiet a few needs of dealing with soc_is checks > > >>> primarily from having to re-architect code in two different directions > > >>> - we want to move into just one direction eventually - to prm drivers > > >>> and as less code in mach-omap2 which is already in the works. > > >> > > >> Why don't you just set some flag at init time based on the > > >> soc_is check and then test that here? That limits the use of > > >> soc_is to init code only which makes it easier to phase it > > >> out completely eventually. > > >> > > > Indeed. Infact the version of the code I tried posting last year was > > > using a flag which was initialised during init. Same can be > > > done her. > > > > OK. will try something along that line in the next rev. > > > Hi, > > Updated patch below: Looks OK to me thanks. Tony