From mboxrd@z Thu Jan 1 00:00:00 1970 From: nm@ti.com (Nishanth Menon) Date: Mon, 8 Sep 2014 13:47:27 -0500 Subject: [PATCH 6/6] ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable In-Reply-To: <1408716235-26164-7-git-send-email-nm@ti.com> References: <1408716235-26164-1-git-send-email-nm@ti.com> <1408716235-26164-7-git-send-email-nm@ti.com> Message-ID: <20140908184727.GA2103@kahuna> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 09:03-20140822, Nishanth Menon wrote: > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&uart1_pins>; > + interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH > + &dra7_pmx_core 0x3e0>; ^^ Thanks to Lee Jones pointing this out to me in a different context[1] I made the wrong usage. Fixing the syntax to stay in sync with Documentation/devicetree/bindings/interrupt-controller/interrupts.txt [1] http://marc.info/?l=linux-omap&m=140930980325273&w=2 -----8<---- >>From c3c284ebd2b8d5535abf297ef7537b2caa7fe67b Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 6 Jun 2014 20:53:22 -0500 Subject: [PATCH V2 6/6] ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable Mark rxd as wakeupcapable for 115200n8 no hardware-flow control configuration. If h/w flow control is being used, then rts/cts appropriately should be used. Signed-off-by: Nishanth Menon --- arch/arm/boot/dts/dra7-evm.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 50f8022..08434c7 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -303,6 +303,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; + interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <&dra7_pmx_core 0x3e0>; }; &uart2 { -- 1.7.9.5 -- Regards, Nishanth Menon