From mboxrd@z Thu Jan  1 00:00:00 1970
From: shawn.guo@freescale.com (Shawn Guo)
Date: Thu, 11 Sep 2014 15:44:31 +0800
Subject: [PATCH] ARM: DT: imx53: fix lvds channel 1 port
In-Reply-To: <1409848985-16140-1-git-send-email-list-09_linux_arm@tqsc.de>
References: <1409848985-16140-1-git-send-email-list-09_linux_arm@tqsc.de>
Message-ID: <20140911074428.GF18566@dragon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Thu, Sep 04, 2014 at 06:43:05PM +0200, Markus Niebel wrote:
> From: Markus Niebel <Markus.Niebel@tq-group.com>
> 
> using LVDS channel 1 on an i.MX53 leads to following error:
> 
> imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1
> 
> This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for
> reparenting di1 clock to ldb_di1. The value of the mux param comes from device
> tree port settings.
> 
> On i.MX5, the internal two-input-multiplexer is used. Due to hardware limitations,
> only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1],
> respectively)
> 
> Documentation update suggested by Philipp Zabel <p.zabel@pengutronix.de>
> 
> Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>

Applied, thanks.