From mboxrd@z Thu Jan 1 00:00:00 1970 From: boris.brezillon@free-electrons.com (Boris BREZILLON) Date: Thu, 11 Sep 2014 16:45:36 +0200 Subject: [PATCH] mtd: nand: gpmi: add proper raw access support In-Reply-To: <20140911142930.GB2543@localhost.localdomain> References: <1410339339-25561-1-git-send-email-boris.brezillon@free-electrons.com> <20140911142930.GB2543@localhost.localdomain> Message-ID: <20140911164536.796f1012@bbrezillon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, 11 Sep 2014 22:29:32 +0800 Huang Shijie wrote: > On Wed, Sep 10, 2014 at 10:55:39AM +0200, Boris BREZILLON wrote: > +static int gpmi_ecc_read_page_raw(struct mtd_info *mtd, > > + struct nand_chip *chip, uint8_t *buf, > > + int oob_required, int page) > > +{ > > + struct gpmi_nand_data *this = chip->priv; > > + struct bch_geometry *nfc_geo = &this->bch_geometry; > > + int eccsize = nfc_geo->ecc_chunk_size; > > + int eccbytes = DIV_ROUND_UP(nfc_geo->ecc_strength * nfc_geo->gf_len, > > + 8); > > In actually, the ECC can be _NOT_ bytes aligned. > you should not round up to byte. You mean, on the NAND storage ? That would be weird, but I'll check. When accessing in raw mode I'm not using the ECC engine (or at least that's what I'm trying to achieve when using read_buf and not gpmi_ecc_read_page). -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com