linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: b38343@freescale.com (Robin Gong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/3] ARM: dts: imx6: add pm_power_off support for i.mx6 chips
Date: Wed, 17 Sep 2014 11:32:32 +0800	[thread overview]
Message-ID: <20140917033230.GD27452@Robin-OptiPlex-780> (raw)
In-Reply-To: <20140917014723.GB4796@dragon>

On Wed, Sep 17, 2014 at 09:47:24AM +0800, Shawn Guo wrote:
> On Fri, Sep 12, 2014 at 04:48:57PM +0800, Robin Gong wrote:
> > All chips of i.mx6 can be powered off by programming SNVS.
> > For example :
> > On i.mx6q-sabresd board, PMIC_ON_REQ connect with external
> > pmic ON/OFF pin, that will cause the whole PMIC powered off
> > except VSNVS. And system can restart once PMIC_ON_REQ goes
> > high by push POWRER key.
> > 
> > Signed-off-by: Robin Gong <b38343@freescale.com>
> > ---
> >  .../bindings/power_supply/imx-snvs-poweroff.txt     | 21 +++++++++++++++++++++
> 
> Binding docs should be generally a separate patch or in the driver
> patch, which uses the bindings.
> 
> Shawn
>
Ok, I'll split it.
> >  arch/arm/boot/dts/imx6qdl.dtsi                      |  5 +++++
> >  arch/arm/boot/dts/imx6sl.dtsi                       |  5 +++++
> >  arch/arm/boot/dts/imx6sx.dtsi                       |  5 +++++
> >  4 files changed, 36 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > new file mode 100644
> > index 0000000..1a3ab9a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt
> > @@ -0,0 +1,21 @@
> > +i.mx6 Poweroff Driver
> > +
> > +SNVS_LPCR in SNVS module can power off the whole system by pull
> > +PMIC_ON_REQ low.
> > +
> > +Required Properties:
> > +-compatible: "fsl,sec-v4.0-poweroff"
> > +-reg: Specifies the physical address of the SNVS_LPCR register
> > +
> > +Example:
> > +	snvs at 020cc000 {
> > +		compatible = "fsl,sec-v4.0-mon", "simple-bus";
> > +		#address-cells = <1>;
> > +		#size-cells = <1>;
> > +		ranges = <0 0x020cc000 0x4000>;
> > +		.....
> > +		snvs-poweroff at 38 {
> > +			compatible = "fsl,sec-v4.0-poweroff";
> > +			reg = <0x38 0x4>;
> > +		};
> > +	}
> > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> > index 70d7207..d2d7563 100644
> > --- a/arch/arm/boot/dts/imx6qdl.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> > @@ -650,6 +650,11 @@
> >  					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
> >  						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff at 38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit at 020d0000 { /* EPIT1 */
> > diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
> > index ba67714..6e1d8f6 100644
> > --- a/arch/arm/boot/dts/imx6sl.dtsi
> > +++ b/arch/arm/boot/dts/imx6sl.dtsi
> > @@ -568,6 +568,11 @@
> >  					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
> >  						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff at 38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit at 020d0000 {
> > diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
> > index d137caca..c1f937e 100644
> > --- a/arch/arm/boot/dts/imx6sx.dtsi
> > +++ b/arch/arm/boot/dts/imx6sx.dtsi
> > @@ -671,6 +671,11 @@
> >  					reg = <0x34 0x58>;
> >  					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> >  				};
> > +
> > +				snvs-poweroff at 38 {
> > +					compatible = "fsl,sec-v4.0-poweroff";
> > +					reg = <0x38 0x4>;
> > +				};
> >  			};
> >  
> >  			epit1: epit at 020d0000 {
> > -- 
> > 1.9.1
> > 

  reply	other threads:[~2014-09-17  3:32 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-12  8:48 [PATCH v2 0/3] add power off driver for i.mx6 Robin Gong
2014-09-12  8:48 ` [PATCH v2 1/3] ARM: dts: imx6: add pm_power_off support for i.mx6 chips Robin Gong
2014-09-17  1:47   ` Shawn Guo
2014-09-17  3:32     ` Robin Gong [this message]
2014-09-17  2:10   ` Shawn Guo
2014-09-17  3:45     ` Robin Gong
2014-09-17  4:50       ` Shawn Guo
2014-09-17  6:06       ` Sascha Hauer
2014-09-17  7:17         ` Robin Gong
2014-09-17  7:24           ` Sascha Hauer
2014-09-17  8:16             ` Robin Gong
2014-09-12  8:48 ` [PATCH v2 2/3] power: reset: imx-snvs-poweroff: add power off driver for i.mx6 Robin Gong
2014-09-17  2:06   ` Shawn Guo
2014-09-17  3:35     ` Robin Gong
2014-09-12  8:48 ` [PATCH v2 3/3] ARM: configs: imx_v6_v7_defconfig: add power off driver Robin Gong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140917033230.GD27452@Robin-OptiPlex-780 \
    --to=b38343@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).