[PATCH 2/3] ARM: dts: vf610-colibri: Add PWM support

Bhuvanchandra DV
2014-09-17T08:16:29Z

The Colibri standard defines four pins as PWM outputs, two of them (PWM
A and C) are routed to FTM instance 0 and the other two (PWM B and D)
are routed to FTM instance 1. Hence enable both FTM instances for the
Colibri module and mux the four pins accordingly.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
---
arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 8 ++++++++
arch/arm/boot/dts/vf610-colibri.dtsi | 25 +++++++++++++++++++++++++
2 files changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
index 7fb3066..ba98039 100644
--- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
@@ -44,3 +44,11 @@
&uart2 {
status = "okay";
};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
index 0cd8343..9bd1415 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -69,6 +69,16 @@
status = "okay";
};

+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
&iomuxc {
vf610-colibri {
pinctrl_esdhc1: esdhc1grp {
@@ -119,5 +129,20 @@
VF610_PAD_PTD3__UART2_CTS 0x21a1
>;
};
+
+ pinctrl_pwm0: pwm0grp {
+ fsl,pins = <
+ VF610_PAD_PTB0__FTM0_CH0 0x1182
+ VF610_PAD_PTB1__FTM0_CH1 0x1182
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ VF610_PAD_PTB8__FTM1_CH0 0x1182
+ VF610_PAD_PTB9__FTM1_CH1 0x1182
+ >;
+ };
+
};
};
--
1.7.9.5