[PATCH 09/12] ARM: omap2plus_defconfig: Add cpufreq to defconfig

[tony@atomide.com (Tony Lindgren)]

* Nishanth Menon <nm@ti.com> [140918 09:12]:
> On 20:12-20140915, Tony Lindgren wrote:
> > Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0,
> > so let's only enable that.
> > 
> > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > ---
> >  arch/arm/configs/omap2plus_defconfig | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
> > index fc63855..9d232a5 100644
> > --- a/arch/arm/configs/omap2plus_defconfig
> > +++ b/arch/arm/configs/omap2plus_defconfig
> > @@ -43,6 +43,13 @@ CONFIG_ARM_APPENDED_DTB=y
> >  CONFIG_ARM_ATAG_DTB_COMPAT=y
> >  CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
> >  CONFIG_KEXEC=y
> > +CONFIG_CPU_FREQ=y
> > +CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> > +CONFIG_CPU_FREQ_GOV_USERSPACE=y
> > +CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> > +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
> > +CONFIG_GENERIC_CPUFREQ_CPU0=y
> > +# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
> 
> With this
> we get performace as the default governor.
> 
> could we use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as the default
> instead? on Many TI SoCs using Highest frequency is not really too nice
> of an idea for long periods of time. And not everything is upstream to
> support things optimially - example avs class 0, 1.5 ABB consolidation
> with cpufreq etc.. We definitely need thermal enabled as well for device
> safety needs.

OK, sure. I've applied the following version with your changes folded
in.

Regards,

Tony

8< ---------------
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 18 Sep 2014 09:01:07 -0700
Subject: [PATCH] ARM: omap2plus_defconfig: Add cpufreq to defconfig

Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0,
so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND
as suggested by Nishant.

And also let's enable thermal as explained by Nishant Menon:

Many TI SoCs using Highest frequency is not really too nice of an idea for
long periods of time. And not everything is upstream to support things
optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc..
We definitely need thermal enabled as well for device safety needs.

Cc: Nishanth Menon <nm@ti.com>
[tony at atomide.com: updated per Nishant's suggestions]
Signed-off-by: Tony Lindgren <tony@atomide.com>

--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -43,6 +43,14 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
 CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_GENERIC_CPUFREQ_CPU0=y
+# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
 CONFIG_CPU_IDLE=y
 CONFIG_BINFMT_MISC=y
 CONFIG_PM_DEBUG=y
@@ -162,7 +170,9 @@ CONFIG_SENSORS_LM75=m
 CONFIG_THERMAL=y
 CONFIG_THERMAL_GOV_FAIR_SHARE=y
 CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
 CONFIG_TI_SOC_THERMAL=y
+CONFIG_TI_THERMAL=y
 CONFIG_OMAP4_THERMAL=y
 CONFIG_OMAP5_THERMAL=y
 CONFIG_DRA752_THERMAL=y