From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Allwinner DT additions for 3.18
Date: Sat, 20 Sep 2014 22:26:00 +0200 [thread overview]
Message-ID: <20140920202600.GA19359@lukather> (raw)
Hi Arnd, Kevin, Olof,
Please pull the DT additions for the Allwinner SoC for the next merge window.
Thanks!
Maxime
The following changes since commit 7d1311b93e58ed55f3a31cc8f94c4b8fe988a2b9:
Linux 3.17-rc1 (2014-08-16 10:40:26 -0600)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-3.18
for you to fetch changes up to d07fe967189ff7c32f5a78b4f28c2ccbab850091:
ARM: dts: sun8i: Add DMA controller node (2014-09-20 12:39:13 +0200)
----------------------------------------------------------------
Allwinner DT Additions for 3.18
Mostly:
- A23 bringup ongoing
- New boards: HSG H702, Merrii A20 Hummingbird
- sun(4|5|7)i DMA support
- DT relicensing to a dual GPL/X11 license
----------------------------------------------------------------
Chen-Yu Tsai (18):
ARM: dts: sun8i: add rtc device node
ARM: dts: sun6i: add rtc device node
ARM: dts: sun8i: Add PIO controller node to the sun8i dtsi
ARM: dts: sun8i: Add R_PIO controller node to the dtsi
ARM: dts: sun8i: Add pinmux set for uart0
ARM: dts: sun8i: Add pin muxing option for R_UART
ARM: dts: sun8i: ippo-q8h: Add pinctrl properties for R_UART
ARM: dts: sun8i: Add mmc clocks to the dtsi
ARM: dts: sun8i: Add pin-muxing info for the mmc controllers
ARM: dts: sun8i: Add mmc controller nodes
ARM: dts: sun8i: Enable mmc controller on ippo-q8h-v5
ARM: dts: sun8i: Add pin-muxing info for the i2c controllers
ARM: dts: sun8i: Add i2c controller nodes
ARM: dts: sun8i: Enable i2c controllers on ippo-q8h-v5
ARM: dt: sunxi: Remove i2c controller clock-frequency that matches default
ARM: dts: sunxi: Add fixed 5V regulator
ARM: dts: sun5i: Add DT for HSG H702 tablet board
ARM: dts: sun8i: Add DMA controller node
Emilio L?pez (6):
ARM: sun4i: dt: Add node to represent the DMA controller
ARM: sun5i: dt: Add nodes to represent the DMA controllers
ARM: sun7i: dt: Add node to represent the DMA controller
ARM: sun4i: dt: enable DMA on SPI
ARM: sun5i: dt: enable DMA on SPI
ARM: sun7i: dt: enable DMA on SPI
FUKAUMI Naoki (1):
ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME
Maxime Ripard (3):
ARM: sun6i: Relicense the A31 DTSI under GPLv2/X11
ARM: sun7i: Relicense the A20 DTSI under GPLv2/X11
ARM: sun8i: Relicense the A23 DTSI under GPLv2/X11
Wills Wang (2):
ARM: dts: sun7i: Add uart3/4/5, i2c3 and spi2 pinmux
ARM: dts: sun7i: Add Merrii A20 Hummingbird board
arch/arm/boot/dts/Makefile | 3 +
arch/arm/boot/dts/sun4i-a10.dtsi | 19 +-
arch/arm/boot/dts/sun5i-a10s.dtsi | 17 +-
arch/arm/boot/dts/sun5i-a13-hsg-h702.dts | 130 ++++++++++++++
arch/arm/boot/dts/sun5i-a13.dtsi | 17 +-
arch/arm/boot/dts/sun6i-a31.dtsi | 56 +++++-
arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 236 ++++++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 137 ++++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 102 +++++++++--
arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 41 +++++
arch/arm/boot/dts/sun8i-a23.dtsi | 237 ++++++++++++++++++++++++-
arch/arm/boot/dts/sunxi-common-regulators.dtsi | 7 +
12 files changed, 969 insertions(+), 33 deletions(-)
create mode 100644 arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
create mode 100644 arch/arm/boot/dts/sun7i-a20-hummingbird.dts
create mode 100644 arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140920/c0426ee0/attachment.sig>
next reply other threads:[~2014-09-20 20:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-20 20:26 Maxime Ripard [this message]
2014-09-25 16:14 ` [GIT PULL] Allwinner DT additions for 3.18 Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140920202600.GA19359@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).