From: rric@kernel.org (Robert Richter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/4] arm64, thunder: Enable Cavium Thunder SoC Family
Date: Tue, 23 Sep 2014 12:41:22 +0200 [thread overview]
Message-ID: <20140923104122.GE20170@rric.localhost> (raw)
In-Reply-To: <1410544187-15876-1-git-send-email-rric@kernel.org>
On 12.09.14 19:49:43, Robert Richter wrote:
> From: Robert Richter <rrichter@cavium.com>
>
> This initial patches enable Cavium Thunder SoC Family. The patches add
> devicetree and Kconfig support and then add Thunder to the defconfig.
>
> The Thunder system needs more enablement patches for subsystems and
> devices, this includes network, ahci, gicv3/gicv3-its, pci, smmu, kvm.
> We will send separate patch sets for these. All of them base on this
> initial patches.
>
> I sent a separate patch set independently that introduces support for
> dts vendor subdirs. After both patch sets have been applied I will
> send a patch in addition that moves the dts file into a subdirectory.
>
> I sent another separate patch that sets NR_CPUS to 64 per default.
>
> The first patch introduces dts files without having a Kconfig option
> for the soc (ARCH_THUNDER). However, this is introduced in patch 3 and
> added to defconfig in patch 4 as this is my preferred solution. If
> there is still resistance having an ARCH_THUNDER option, just drop
> them.
>
> Patches are available here:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/rric/linux.git thunder/init
Will,
it would be good if these patches could be applied.
Thanks,
-Robert
>
> v3 changes:
> * removed setting NR_CPUS for Thunder, I sent a separate patch that
> increases this to 64 cpus per default
> * reordered patches, dts files changes are know first using dtb-y
> instead of ARCH_THUNDER option
> * moved soc nodes to thunder-88xx.dtsi
>
> v2 changes:
> * rebased to 3.17
> * placed commas between 32-bit portions of 64 bit addresses
> * removed #address-cells and size-cells in gic node
> * get rid of the clocks node
> * changed to gpl/x11 dual license
> * removed memreserve
> * moved gic to bus node
>
> Radha Mohan Chintakuntla (3):
> arm64, thunder: Add initial dts for Cavium Thunder SoC
> arm64, thunder: Document devicetree bindings for Cavium Thunder SoC
> arm64, thunder: Add Kconfig option for Cavium Thunder SoC Family
>
> Robert Richter (1):
> arm64, defconfig: Enable Cavium Thunder SoC in defconfig
>
> .../devicetree/bindings/arm/cavium-thunder.txt | 10 +
> Documentation/devicetree/bindings/arm/cpus.txt | 1 +
> arch/arm64/Kconfig | 5 +
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/thunder-88xx.dts | 67 ++++
> arch/arm64/boot/dts/thunder-88xx.dtsi | 401 +++++++++++++++++++++
> arch/arm64/configs/defconfig | 1 +
> 7 files changed, 486 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/cavium-thunder.txt
> create mode 100644 arch/arm64/boot/dts/thunder-88xx.dts
> create mode 100644 arch/arm64/boot/dts/thunder-88xx.dtsi
>
> --
> 2.1.0
>
next prev parent reply other threads:[~2014-09-23 10:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-12 17:49 [PATCH v3 0/4] arm64, thunder: Enable Cavium Thunder SoC Family Robert Richter
2014-09-12 17:49 ` [PATCH v3 1/4] arm64, thunder: Add initial dts for Cavium Thunder SoC Robert Richter
2014-09-12 17:49 ` [PATCH v3 2/4] arm64, thunder: Document devicetree bindings " Robert Richter
2014-09-12 17:49 ` [PATCH v3 3/4] arm64, thunder: Add Kconfig option for Cavium Thunder SoC Family Robert Richter
2014-09-12 17:49 ` [PATCH v3 4/4] arm64, defconfig: Enable Cavium Thunder SoC in defconfig Robert Richter
2014-09-23 10:41 ` Robert Richter [this message]
2014-09-23 10:46 ` [PATCH v3 0/4] arm64, thunder: Enable Cavium Thunder SoC Family Will Deacon
2014-09-23 11:21 ` Catalin Marinas
2014-09-23 14:14 ` Robert Richter
2014-10-02 7:29 ` Robert Richter
2014-10-02 14:44 ` [GIT PULL] " Robert Richter
2014-10-02 15:44 ` Arnd Bergmann
2014-10-06 8:32 ` Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140923104122.GE20170@rric.localhost \
--to=rric@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).