From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/8] initial suport for Alpscale ASM9260
Date: Wed, 24 Sep 2014 11:13:12 +0100 [thread overview]
Message-ID: <20140924101312.GB5729@leverpostej> (raw)
In-Reply-To: <1411324904-14881-1-git-send-email-linux@rempel-privat.de>
On Sun, Sep 21, 2014 at 07:41:36PM +0100, Oleksij Rempel wrote:
> This patchset provide initial support for Alpscale ASM9260,
> ARM based SoC.
>
> Oleksij Rempel (8):
> ARM: add mach-asm9260
> add include/debug/asm9260.S
> add alphascale,asm9260.h binding
> ARM: dts: add DT for Alphascale ASM9260 SoC
> clk: add clk-asm9260 driver
> clocksource: add asm9260_timer driver
> irqchip: add irq-asm9260 driver
> tty/serial: add asm9260-serial driver
Several of these add new bindings, but no documentation (just a single
header).
Please document your device tree bindings.
Mark.
>
> arch/arm/Kconfig | 14 +
> arch/arm/Kconfig.debug | 33 +-
> arch/arm/Makefile | 1 +
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/alphascale-asm9260-devkit.dts | 15 +
> arch/arm/boot/dts/alphascale-asm9260.dtsi | 166 +++
> arch/arm/include/debug/asm9260.S | 31 +
> arch/arm/mach-asm9260/Makefile | 11 +
> arch/arm/mach-asm9260/Makefile.boot | 2 +
> arch/arm/mach-asm9260/core.c | 77 ++
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-asm9260.c | 350 ++++++
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/asm9260_timer.c | 244 ++++
> drivers/irqchip/Makefile | 1 +
> drivers/irqchip/irq-asm9260.c | 257 ++++
> drivers/tty/serial/Kconfig | 17 +
> drivers/tty/serial/Makefile | 1 +
> drivers/tty/serial/asm9260_serial.c | 1485 +++++++++++++++++++++++
> include/dt-bindings/clock/alphascale,asm9260.h | 97 ++
> include/uapi/linux/serial_core.h | 2 +
> 21 files changed, 2805 insertions(+), 3 deletions(-)
> create mode 100644 arch/arm/boot/dts/alphascale-asm9260-devkit.dts
> create mode 100644 arch/arm/boot/dts/alphascale-asm9260.dtsi
> create mode 100644 arch/arm/include/debug/asm9260.S
> create mode 100644 arch/arm/mach-asm9260/Makefile
> create mode 100644 arch/arm/mach-asm9260/Makefile.boot
> create mode 100644 arch/arm/mach-asm9260/core.c
> create mode 100644 drivers/clk/clk-asm9260.c
> create mode 100644 drivers/clocksource/asm9260_timer.c
> create mode 100644 drivers/irqchip/irq-asm9260.c
> create mode 100644 drivers/tty/serial/asm9260_serial.c
> create mode 100644 include/dt-bindings/clock/alphascale,asm9260.h
>
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
next prev parent reply other threads:[~2014-09-24 10:13 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-21 18:41 [PATCH v2 0/8] initial suport for Alpscale ASM9260 Oleksij Rempel
2014-09-21 18:41 ` [PATCH v2 1/8] ARM: add mach-asm9260 Oleksij Rempel
2014-09-22 15:08 ` Arnd Bergmann
2014-09-23 9:00 ` Oleksij Rempel
2014-09-23 10:19 ` Arnd Bergmann
2014-09-24 8:00 ` Oleksij Rempel
2014-09-24 9:43 ` Russell King - ARM Linux
2014-09-24 9:56 ` Oleksij Rempel
2014-09-24 10:25 ` Russell King - ARM Linux
2014-09-24 10:33 ` Arnd Bergmann
2014-09-24 11:30 ` Oleksij Rempel
2014-09-21 18:41 ` [PATCH v2 2/8] add include/debug/asm9260.S Oleksij Rempel
2014-09-21 18:45 ` Oleksij Rempel
2014-09-21 18:45 ` [PATCH v2 3/8] add alphascale,asm9260.h binding Oleksij Rempel
2014-09-24 10:15 ` Mark Rutland
2014-09-21 18:45 ` [PATCH v2 4/8] ARM: dts: add DT for Alphascale ASM9260 SoC Oleksij Rempel
2014-09-22 15:14 ` Arnd Bergmann
2014-09-24 10:11 ` Mark Rutland
2014-09-21 18:45 ` [PATCH v2 5/8] clk: add clk-asm9260 driver Oleksij Rempel
2014-09-21 18:45 ` [PATCH v2 6/8] clocksource: add asm9260_timer driver Oleksij Rempel
2014-09-21 18:45 ` [PATCH v2 7/8] irqchip: add irq-asm9260 driver Oleksij Rempel
2014-09-22 15:22 ` Arnd Bergmann
2014-09-21 18:45 ` [PATCH v2 8/8] tty/serial: add asm9260-serial driver Oleksij Rempel
2014-09-22 15:26 ` Arnd Bergmann
2014-09-22 16:04 ` Oleksij Rempel
2014-09-24 9:24 ` Oleksij Rempel
2014-09-24 10:20 ` Arnd Bergmann
2014-09-23 11:32 ` [PATCH v2 0/8] initial suport for Alpscale ASM9260 Arnd Bergmann
2014-09-24 10:13 ` Mark Rutland [this message]
2014-10-07 8:55 ` [PATCH v3 0/9] initial suport for Alphascale ASM9260 Oleksij Rempel
2014-10-07 8:55 ` [PATCH v3 1/9] ARM: add mach-asm9260 Oleksij Rempel
2014-10-07 8:55 ` [PATCH v3 2/9] arm: add lolevel debug support for asm9260 Oleksij Rempel
2014-10-07 8:55 ` [PATCH v3 3/9] ARM: dts: add DT for Alphascale ASM9260 SoC Oleksij Rempel
2014-10-07 8:55 ` [PATCH v3 4/9] ARM: add alphascale,acc.txt bindings documentation Oleksij Rempel
2014-10-07 8:55 ` [PATCH v3 5/9] ARM: clk: add clk-asm9260 driver Oleksij Rempel
2014-10-07 8:55 ` [PATCH v3 6/9] clocksource: add asm9260_timer driver Oleksij Rempel
2014-10-07 8:55 ` [PATCH v3 7/9] irqchip/irq-mxs.c: add asm9260 support Oleksij Rempel
2014-10-08 7:45 ` Thomas Gleixner
2014-10-08 12:11 ` [PATCH v4 1/2] irqchip: mxs: prepare driver for HW with different offsets Oleksij Rempel
2014-10-08 12:11 ` [PATCH v4 2/2] irqchip: mxs: add Alpascale ASM9260 support Oleksij Rempel
2014-10-07 8:55 ` [PATCH v3 8/9] tty/serial/mxs-auart.c: add initial Alphascale " Oleksij Rempel
2014-10-07 8:55 ` [PATCH v3 9/9] add Alphascale to vendor-prefixes.txt Oleksij Rempel
2014-10-10 5:38 ` [PATCH v3 0/9] initial suport for Alphascale ASM9260 Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140924101312.GB5729@leverpostej \
--to=mark.rutland@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox