From mboxrd@z Thu Jan 1 00:00:00 1970 From: u.kleine-koenig@pengutronix.de (Uwe =?iso-8859-1?Q?Kleine-K=F6nig?=) Date: Thu, 25 Sep 2014 08:26:48 +0200 Subject: [RFC PATCH] ARM: at91: remove no-MMU at91x40 support In-Reply-To: <1411568281-3924-1-git-send-email-nicolas.ferre@atmel.com> References: <1411568281-3924-1-git-send-email-nicolas.ferre@atmel.com> Message-ID: <20140925062648.GJ3755@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hello Nicolas, On Wed, Sep 24, 2014 at 04:18:01PM +0200, Nicolas Ferre wrote: > As there is currently no-one to take care of this old !MMU target and as its > support in recent kernels is a bit rotten, remove this at91x40 support and the > board file associated with it (at91eb01). > There are modern ARM !MMU in Mainline now so this target is not interesting for s/Mainline/mainline/ > building tests anymore. It would be better to start from these modern ARM !MMU > platforms to reintroduce at91x40 support if needed. This last sentence doesn't sound convincing. at91x40 is an ARM7TDMI while the "modern ARM !MMU" targets base on Cortex-M. Anyhow, the change is fine, so: Acked-by: Uwe Kleine-K?nig Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-K?nig | Industrial Linux Solutions | http://www.pengutronix.de/ |