From: shawn.guo@freescale.com (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4 5/6] ARM: imx: Add initial support for Freescale LS1021A
Date: Fri, 26 Sep 2014 14:30:39 +0800 [thread overview]
Message-ID: <20140926063037.GF31948@dragon> (raw)
In-Reply-To: <1411371952-5618-6-git-send-email-jingchang.lu@freescale.com>
On Mon, Sep 22, 2014 at 03:45:51PM +0800, Jingchang Lu wrote:
> From: Jingchang Lu <b35083@freescale.com>
>
> The LS1021A SoC is a dual-core Cortex-A7 based processor,
> this add the initial support for it.
>
> Signed-off-by: Jingchang Lu <b35083@freescale.com>
> ---
> arch/arm/mach-imx/Kconfig | 14 ++++++++++++++
> arch/arm/mach-imx/Makefile | 2 ++
> arch/arm/mach-imx/mach-ls1021a.c | 21 +++++++++++++++++++++
> 3 files changed, 37 insertions(+)
> create mode 100644 arch/arm/mach-imx/mach-ls1021a.c
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index 11b2957..2cc64a3 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -639,6 +639,20 @@ config SOC_VF610
> help
> This enable support for Freescale Vybrid VF610 processor.
>
> +config SOC_LS1021A
> + bool "Freescale LS1021A support"
> + select CPU_V7
Has been selected by ARCH_MULTI_V7.
> + select ARM_GIC
> + select CLKSRC_OF
Has been selected by ARCH_MULTIPLATFORM.
> + select HAVE_ARM_ARCH_TIMER
> + select HAVE_SMP
Has been selected by ARCH_MULTI_V7.
> + select MIGHT_HAVE_PCI
Has been selected by ARCH_MULTIPLATFORM.
Shawn
> + select PCI_DOMAINS if PCI
> + select ZONE_DMA if ARM_LPAE
> +
> + help
> + This enable support for Freescale LS1021A processor.
> +
> endif
>
> source "arch/arm/mach-imx/devices/Kconfig"
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index 6e4fcd8..ce137bc 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -110,4 +110,6 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
>
> obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
>
> +obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
> +
> obj-y += devices/
> diff --git a/arch/arm/mach-imx/mach-ls1021a.c b/arch/arm/mach-imx/mach-ls1021a.c
> new file mode 100644
> index 0000000..9d2034b
> --- /dev/null
> +++ b/arch/arm/mach-imx/mach-ls1021a.c
> @@ -0,0 +1,21 @@
> +/*
> + * Copyright 2013-2014 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <asm/mach/arch.h>
> +
> +#include "common.h"
> +
> +static const char * const ls1021a_dt_compat[] __initconst = {
> + "fsl,ls1021a",
> + NULL,
> +};
> +
> +DT_MACHINE_START(LS1021A, "Freescale LS1021A")
> + .dt_compat = ls1021a_dt_compat,
> +MACHINE_END
> --
> 1.8.0
>
next prev parent reply other threads:[~2014-09-26 6:30 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-22 7:45 No subject Jingchang Lu
2014-09-22 7:45 ` [PATCHv4 1/6] ARM: dts: Add SoC level device tree support for LS1021A Jingchang Lu
2014-09-26 5:49 ` Shawn Guo
2014-09-22 7:45 ` [PATCHv4 2/6] ARM: dts: Add initial LS1021A QDS board dts support Jingchang Lu
2014-09-26 6:13 ` Shawn Guo
2014-09-26 7:51 ` Li.Xiubo at freescale.com
2014-09-28 8:48 ` Jingchang Lu
2014-09-30 9:39 ` Arnd Bergmann
2014-09-22 7:45 ` [PATCHv4 3/6] ARM: dts: Add initial LS1021A TWR " Jingchang Lu
2014-09-23 14:54 ` Arnd Bergmann
2014-09-24 5:47 ` Jingchang Lu
2014-09-24 9:36 ` Arnd Bergmann
2014-09-24 11:00 ` Jingchang Lu
2014-09-24 15:54 ` Arnd Bergmann
2014-09-25 8:06 ` Jingchang Lu
2014-09-25 10:57 ` Arnd Bergmann
2014-09-22 7:45 ` [PATCHv4 4/6] dt-bindings: arm: add Freescale LS1021A SoC device tree binding Jingchang Lu
2014-09-26 6:18 ` Shawn Guo
2014-09-22 7:45 ` [PATCHv4 5/6] ARM: imx: Add initial support for Freescale LS1021A Jingchang Lu
2014-09-26 6:30 ` Shawn Guo [this message]
2014-09-22 7:45 ` [PATCHv4 6/6] ARM: imx: Add Freescale LS1021A SMP support Jingchang Lu
2014-09-26 6:33 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140926063037.GF31948@dragon \
--to=shawn.guo@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).