From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawn.guo@freescale.com (Shawn Guo) Date: Sun, 28 Sep 2014 12:02:34 +0800 Subject: [PATCH 2/3] ARM: dts: vf610: Add SNVS node In-Reply-To: <49cb7f5fc8319fc47dc2919a2ccbff981196d4ff.1411736171.git.maitysanchayan@gmail.com> References: <49cb7f5fc8319fc47dc2919a2ccbff981196d4ff.1411736171.git.maitysanchayan@gmail.com> Message-ID: <20140928040233.GG12999@dragon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Sep 26, 2014 at 06:44:00PM +0530, Sanchayan Maity wrote: > This adds a devicetree node for RTC support > for the VF610 platform. > > Signed-off-by: Sanchayan Maity > --- > arch/arm/boot/dts/vf610.dtsi | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi > index 4d2ec32..3c0c757 100644 > --- a/arch/arm/boot/dts/vf610.dtsi > +++ b/arch/arm/boot/dts/vf610.dtsi > @@ -381,6 +381,21 @@ > <&clks VF610_CLK_DMAMUX3>; > }; > > + snvs0: snvs at 400a7000 { > + compatible = "fsl,sec-v4.0-mon", "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0x400a7000 0x2000>; > + > + snvs-rtc-lp at 34 { > + compatible = "fsl,sec-v4.0-mon-rtc-lp"; > + reg = <0x34 0x58>; > + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks VF610_CLK_SNVS>; > + clock-names = "snvs"; The name should describe the clock usage inside the block, so "snvs" is not a good description. Shawn > + }; > + }; > + > uart4: serial at 400a9000 { > compatible = "fsl,vf610-lpuart"; > reg = <0x400a9000 0x1000>; > -- > 1.7.9.5 >