From mboxrd@z Thu Jan  1 00:00:00 1970
From: shawn.guo@freescale.com (Shawn Guo)
Date: Sun, 28 Sep 2014 13:32:11 +0800
Subject: [PATCH v1 3/3] ARM: dts: imx6x: Add enet2 support for imx6sx-sdb
 board
In-Reply-To: <7e14fd7a305d44df90bcae3b16b56d60@BY2PR03MB377.namprd03.prod.outlook.com>
References: <1411524680-12863-1-git-send-email-b38611@freescale.com>
 <1411524680-12863-4-git-send-email-b38611@freescale.com>
 <20140928032852.GC12999@dragon>
 <49aafc1f34a34c13ac7af2cf4b04fd6d@BY2PR03MB377.namprd03.prod.outlook.com>
 <20140928034213.GD12999@dragon>
 <7e14fd7a305d44df90bcae3b16b56d60@BY2PR03MB377.namprd03.prod.outlook.com>
Message-ID: <20140928053210.GJ12999@dragon>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Sun, Sep 28, 2014 at 01:20:16PM +0800, Duan Fugang-B38611 wrote:
> MX6SX_PAD_ENET2_COL__GPIO2_IO_6: it is a switch which enable ENET_3V3 and 25Mhz clock for phy.
> MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16: it is a switch which enable PERI_3V3 that supply power for some modules including enet MAC and phy.
> 

So it sounds like they can be handled with fixed regulators?

Shawn