* [PATCH v2 1/3] ARM: dts: sun7i: Add spi0_pins_a pinctrl setting
2014-10-01 7:26 [PATCH v2 0/3] ARM: dts: sun7i: Add Banana Pi board Hans de Goede
@ 2014-10-01 7:26 ` Hans de Goede
2014-10-01 7:26 ` [PATCH v2 2/3] ARM: dts: sun7i: Add uart3_pins_b " Hans de Goede
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Hans de Goede @ 2014-10-01 7:26 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index b22daf3..cb5abef 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -784,6 +784,13 @@
allwinner,pull = <0>;
};
+ spi0_pins_a: spi0 at 0 {
+ allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14";
+ allwinner,function = "spi0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
spi1_pins_a: spi1 at 0 {
allwinner,pins = "PI16", "PI17", "PI18", "PI19";
allwinner,function = "spi1";
--
2.1.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v2 3/3] ARM: dts: sun7i: Add Banana Pi board
2014-10-01 7:26 [PATCH v2 0/3] ARM: dts: sun7i: Add Banana Pi board Hans de Goede
2014-10-01 7:26 ` [PATCH v2 1/3] ARM: dts: sun7i: Add spi0_pins_a pinctrl setting Hans de Goede
2014-10-01 7:26 ` [PATCH v2 2/3] ARM: dts: sun7i: Add uart3_pins_b " Hans de Goede
@ 2014-10-01 7:26 ` Hans de Goede
2014-10-02 9:46 ` [PATCH v2 0/3] " Maxime Ripard
3 siblings, 0 replies; 5+ messages in thread
From: Hans de Goede @ 2014-10-01 7:26 UTC (permalink / raw)
To: linux-arm-kernel
The Banana Pi is an A20 based development board using Raspberry Pi compatible
IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi
and stereo audio out + various expenansion headers:
http://www.lemaker.org/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 214 +++++++++++++++++++++++++++++++
2 files changed, 215 insertions(+)
create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapi.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b8c5cd3..c3003a4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -414,6 +414,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-hummingbird.dtb \
sun6i-a31-m9.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
+ sun7i-a20-bananapi.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-i12-tvbox.dtb \
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
new file mode 100644
index 0000000..0e7c9f5
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "LeMaker Banana Pi";
+ compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
+
+ soc at 01c00000 {
+ spi0: spi at 01c05000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+ };
+
+ mmc0: mmc at 01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 0>; /* PH10 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ usbphy: phy at 01c13400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb at 01c14000 {
+ status = "okay";
+ };
+
+ ohci0: usb at 01c14400 {
+ status = "okay";
+ };
+
+ ahci: sata at 01c18000 {
+ status = "okay";
+ };
+
+ ehci1: usb at 01c1c000 {
+ status = "okay";
+ };
+
+ ohci1: usb at 01c1c400 {
+ status = "okay";
+ };
+
+ pinctrl at 01c20800 {
+ mmc0_cd_pin_bananapi: mmc0_cd_pin at 0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ gmac_power_pin_bananapi: gmac_power_pin at 0 {
+ allwinner,pins = "PH23";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ led_pins_bananapi: led_pins at 0 {
+ allwinner,pins = "PH24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ ir0: ir at 01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
+ uart0: serial at 01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ uart3: serial at 01c28c00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_b>;
+ status = "okay";
+ };
+
+ uart7: serial at 01c29c00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+ };
+
+ i2c0: i2c at 01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic at 34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ i2c2: i2c at 01c2b400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+ };
+
+ gmac: ethernet at 01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_bananapi>;
+
+ green {
+ label = "bananapi:green:usr";
+ gpios = <&pio 7 24 0>;
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ status = "okay";
+ };
+
+ reg_usb2_vbus: usb2-vbus {
+ status = "okay";
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_bananapi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <50000>;
+ enable-active-high;
+ gpio = <&pio 7 23 0>;
+ };
+};
--
2.1.0
^ permalink raw reply related [flat|nested] 5+ messages in thread