From mboxrd@z Thu Jan  1 00:00:00 1970
From: pavel@ucw.cz (Pavel Machek)
Date: Fri, 3 Oct 2014 21:57:24 +0200
Subject: [PATCH v5 3/4] ARM: tegra: Add thermal trip points for Jetson TK1
In-Reply-To: <20140924183204.GE27076@developer>
References: <1408616242-21009-1-git-send-email-mperttunen@nvidia.com>
 <1408616242-21009-4-git-send-email-mperttunen@nvidia.com>
 <20140924183204.GE27076@developer>
Message-ID: <20141003195723.GA6074@amd>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed 2014-09-24 14:32:06, Eduardo Valentin wrote:
> Hello Mikko,
> 
> On Thu, Aug 21, 2014 at 01:17:21PM +0300, Mikko Perttunen wrote:
> > This adds critical trip points to the Jetson TK1 device tree.
> > The device will do a controlled shutdown when either the CPU, GPU
> > or MEM thermal zone reaches 101 degrees Celsius.

> > +			trips {
> > +				trip at 0 {
> > +					temperature = <101000>;
> > +					hysteresis = <0>;
> > +					type = "critical";
> > +				};

Would it be still time to switch to some more reasonable unit, like
degrees celsius? milicelsius is a bit of overkill.. ACPI uses
deciCelsius, but .. celsius should be enough.

								Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html