From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4] ARM: sun7i: add support for A20-OLinuXino-Lime2
Date: Thu, 9 Oct 2014 21:56:30 +0200 [thread overview]
Message-ID: <20141009195630.GJ19438@lukather> (raw)
In-Reply-To: <54366326.3060303@gmail.com>
Hi Iain,
On Thu, Oct 09, 2014 at 11:27:50AM +0100, Iain Paton wrote:
> This adds support for the Olimex A20-OLinuXino-Lime2
> https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2
>
> Differences to previous Lime boards are 1GB RAM and gigabit ethernet
>
> Signed-off-by: Iain Paton <ipaton0@gmail.com>
Sorry for noticing this so late, but we sort the DT nodes by their
base address. Could you respin this for another version?
> ---
>
> changes for v2
> add axp209 regulators node
>
> changes for v3
> add reg_axp_ipsout regulator
> follow suggestion by Chen-Yu in
> http://lists.infradead.org/pipermail/linux-arm-kernel/2014-October/292645.html
> on parenting the regulators
>
> changes for v4
> give regulators better names
> add spacing between nodes
> drop ldo5 as it doesn't appear to be used
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 229 ++++++++++++++++++++++++
> 2 files changed, 230 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 2f42b18..ea6c672 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -420,6 +420,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
> sun7i-a20-hummingbird.dtb \
> sun7i-a20-i12-tvbox.dtb \
> sun7i-a20-olinuxino-lime.dtb \
> + sun7i-a20-olinuxino-lime2.dtb \
> sun7i-a20-olinuxino-micro.dtb \
> sun7i-a20-pcduino3.dtb
> dtb-$(CONFIG_MACH_SUN8I) += \
> diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> new file mode 100644
> index 0000000..4e68101
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
> @@ -0,0 +1,229 @@
> +/*
> + * Copyright 2014 - Iain Paton <ipaton0@gmail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public
> + * License along with this library; if not, write to the Free
> + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +/include/ "sun7i-a20.dtsi"
> +/include/ "sunxi-common-regulators.dtsi"
> +
> +/ {
> + model = "Olimex A20-OLinuXino-LIME2";
> + compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
> +
> + soc at 01c00000 {
> +
And drop this newline while we're at it?
Thanks a lot,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141009/e0809c45/attachment.sig>
next prev parent reply other threads:[~2014-10-09 19:56 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-28 13:18 [PATCH] ARM: sun7i: add support for A20-OLinuXino-Lime2 Iain Paton
2014-09-28 16:43 ` Maxime Ripard
2014-09-29 12:56 ` Iain Paton
2014-09-29 13:25 ` Maxime Ripard
2014-09-29 14:32 ` Iain Paton
2014-10-02 12:48 ` Maxime Ripard
2014-10-05 22:40 ` [PATCH v3 ] " Iain Paton
2014-10-06 9:20 ` Maxime Ripard
2014-10-09 10:27 ` [PATCH v4] " Iain Paton
2014-10-09 19:56 ` Maxime Ripard [this message]
2014-10-10 13:15 ` [PATCH v5] " Iain Paton
2014-10-10 13:55 ` Maxime Ripard
2014-10-10 13:15 ` [PATCH v4] " Iain Paton
2014-10-10 13:56 ` Maxime Ripard
2014-10-11 14:00 ` Andreas Färber
2014-10-06 8:56 ` [PATCH] " Javier Martinez Canillas
2014-10-06 9:11 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141009195630.GJ19438@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox