From mboxrd@z Thu Jan 1 00:00:00 1970 From: boris.brezillon@free-electrons.com (Boris Brezillon) Date: Fri, 10 Oct 2014 16:01:48 +0200 Subject: [PATCH] ARM: at91/dt: sam9263: fix PLLB frequencies In-Reply-To: <1412949021-15150-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1412949021-15150-1-git-send-email-alexandre.belloni@free-electrons.com> Message-ID: <20141010160148.57290e20@bbrezillon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, 10 Oct 2014 15:50:21 +0200 Alexandre Belloni wrote: > From: Boris Brezillon > > PLLB input and output ranges were wrongly copied from at91sam9261 as the > datasheet didn't mention explicitly PLLB. Correct their values. > > This fixes USB. > > Signed-off-by: Boris Brezillon > Acked-by: Alexandre Belloni Thanks for sending this patch. Just adding Andreas in Cc and adding his Reported and Tested-by. Reported-by: Andreas Henriksson Tested-by: Andreas Henriksson > --- > arch/arm/boot/dts/at91sam9263.dtsi | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi > index d68b3c4862bc..51416c7d0625 100644 > --- a/arch/arm/boot/dts/at91sam9263.dtsi > +++ b/arch/arm/boot/dts/at91sam9263.dtsi > @@ -122,9 +122,10 @@ > interrupts-extended = <&pmc AT91_PMC_LOCKB>; > clocks = <&main>; > reg = <1>; > - atmel,clk-input-range = <1000000 5000000>; > + atmel,clk-input-range = <1000000 32000000>; > #atmel,pll-clk-output-range-cells = <4>; > - atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; > + atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, > + <190000000 240000000 2 1>; > }; > > mck: masterck { -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com