From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 01/15] arm/arm64: KVM: rework MPIDR assignment and add accessors
Date: Wed, 15 Oct 2014 09:25:23 -0700 [thread overview]
Message-ID: <20141015162523.GB14272@lvm> (raw)
In-Reply-To: <1408626416-11326-2-git-send-email-andre.przywara@arm.com>
On Thu, Aug 21, 2014 at 02:06:42PM +0100, Andre Przywara wrote:
> The virtual MPIDR registers (containing topology information) for the
> guest are currently mapped linearily to the vcpu_id. Improve this
> mapping for arm64 by using three levels to not artificially limit the
> number of vCPUs. Also add an accessor to later allow easier access to
> a vCPU with a given MPIDR.
> Use this new accessor in the PSCI emulation.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> arch/arm/include/asm/kvm_emulate.h | 2 +-
> arch/arm/include/asm/kvm_host.h | 2 ++
> arch/arm/kvm/arm.c | 15 +++++++++++++++
> arch/arm/kvm/psci.c | 15 ++++-----------
> arch/arm64/include/asm/kvm_emulate.h | 3 ++-
> arch/arm64/include/asm/kvm_host.h | 2 ++
> arch/arm64/kvm/sys_regs.c | 11 +++++++++--
> 7 files changed, 35 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h
> index 69b7469..18e45f7 100644
> --- a/arch/arm/include/asm/kvm_emulate.h
> +++ b/arch/arm/include/asm/kvm_emulate.h
> @@ -159,7 +159,7 @@ static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu)
>
> static inline unsigned long kvm_vcpu_get_mpidr(struct kvm_vcpu *vcpu)
> {
> - return vcpu->arch.cp15[c0_MPIDR];
> + return vcpu->arch.cp15[c0_MPIDR] & MPIDR_HWID_BITMASK;
why?
> }
>
> static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
> index 6dfb404..cf99ad0 100644
> --- a/arch/arm/include/asm/kvm_host.h
> +++ b/arch/arm/include/asm/kvm_host.h
> @@ -233,4 +233,6 @@ static inline void vgic_arch_setup(const struct vgic_params *vgic)
> int kvm_perf_init(void);
> int kvm_perf_teardown(void);
>
> +struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
> +
> #endif /* __ARM_KVM_HOST_H__ */
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 7d5065e..addb990 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -990,6 +990,21 @@ static void check_kvm_target_cpu(void *ret)
> *(int *)ret = kvm_target_cpu();
> }
>
> +struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr)
> +{
> + unsigned long c_mpidr;
> + struct kvm_vcpu *vcpu;
> + int i;
> +
> + mpidr &= MPIDR_HWID_BITMASK;
> + kvm_for_each_vcpu(i, vcpu, kvm) {
> + c_mpidr = kvm_vcpu_get_mpidr(vcpu);
> + if (c_mpidr == mpidr)
> + return vcpu;
> + }
> + return NULL;
> +}
> +
> /**
> * Initialize Hyp-mode and memory mappings on all CPUs.
> */
> diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c
> index 09cf377..49f0992 100644
> --- a/arch/arm/kvm/psci.c
> +++ b/arch/arm/kvm/psci.c
> @@ -21,6 +21,7 @@
> #include <asm/cputype.h>
> #include <asm/kvm_emulate.h>
> #include <asm/kvm_psci.h>
> +#include <asm/kvm_host.h>
>
> /*
> * This is an implementation of the Power State Coordination Interface
> @@ -65,25 +66,17 @@ static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
> static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
> {
> struct kvm *kvm = source_vcpu->kvm;
> - struct kvm_vcpu *vcpu = NULL, *tmp;
> + struct kvm_vcpu *vcpu = NULL;
> wait_queue_head_t *wq;
> unsigned long cpu_id;
> unsigned long context_id;
> - unsigned long mpidr;
> phys_addr_t target_pc;
> - int i;
>
> - cpu_id = *vcpu_reg(source_vcpu, 1);
> + cpu_id = *vcpu_reg(source_vcpu, 1) & MPIDR_HWID_BITMASK;
> if (vcpu_mode_is_32bit(source_vcpu))
> cpu_id &= ~((u32) 0);
>
> - kvm_for_each_vcpu(i, tmp, kvm) {
> - mpidr = kvm_vcpu_get_mpidr(tmp);
> - if ((mpidr & MPIDR_HWID_BITMASK) == (cpu_id & MPIDR_HWID_BITMASK)) {
> - vcpu = tmp;
> - break;
> - }
> - }
> + vcpu = kvm_mpidr_to_vcpu(kvm, cpu_id);
>
> /*
> * Make sure the caller requested a valid CPU and that the CPU is
> diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> index fdc3e21..4b8d636 100644
> --- a/arch/arm64/include/asm/kvm_emulate.h
> +++ b/arch/arm64/include/asm/kvm_emulate.h
> @@ -27,6 +27,7 @@
> #include <asm/kvm_arm.h>
> #include <asm/kvm_mmio.h>
> #include <asm/ptrace.h>
> +#include <asm/cputype.h>
>
> unsigned long *vcpu_reg32(const struct kvm_vcpu *vcpu, u8 reg_num);
> unsigned long *vcpu_spsr32(const struct kvm_vcpu *vcpu);
> @@ -179,7 +180,7 @@ static inline u8 kvm_vcpu_trap_get_fault(const struct kvm_vcpu *vcpu)
>
> static inline unsigned long kvm_vcpu_get_mpidr(struct kvm_vcpu *vcpu)
> {
> - return vcpu_sys_reg(vcpu, MPIDR_EL1);
> + return vcpu_sys_reg(vcpu, MPIDR_EL1) & MPIDR_HWID_BITMASK;
why?
> }
>
> static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index e10c45a..017fbae 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -244,4 +244,6 @@ static inline void vgic_arch_setup(const struct vgic_params *vgic)
> }
> }
>
> +struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
> +
> #endif /* __ARM64_KVM_HOST_H__ */
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index 5805e7c..a79538a 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -252,10 +252,17 @@ static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
>
> static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
> {
> + u64 mpidr;
> +
> /*
> - * Simply map the vcpu_id into the Aff0 field of the MPIDR.
> + * Map the vcpu_id into the first three Aff fields of the MPIDR.
> + * Aff0 uses only 16 CPUs, since there is a SGI injection
> + * limitation of GICv3.
We limit the number of VCPUs in Aff0 due to a limitation in the
ICC_SGIxR registers of the GICv3.
> */
> - vcpu_sys_reg(vcpu, MPIDR_EL1) = (1UL << 31) | (vcpu->vcpu_id & 0xff);
> + mpidr = (vcpu->vcpu_id & 0x0f) << MPIDR_LEVEL_SHIFT(0);
> + mpidr |= ((vcpu->vcpu_id >> 4) & 0xff) << MPIDR_LEVEL_SHIFT(1);
> + mpidr |= ((vcpu->vcpu_id >> 12) & 0xff) << MPIDR_LEVEL_SHIFT(2);
> + vcpu_sys_reg(vcpu, MPIDR_EL1) = (1ULL << 31) | mpidr;
> }
>
> /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
> --
> 1.7.9.5
>
next prev parent reply other threads:[~2014-10-15 16:25 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-21 13:06 [PATCH v2 00/15] KVM GICv3 emulation Andre Przywara
2014-08-21 13:06 ` [PATCH v2 01/15] arm/arm64: KVM: rework MPIDR assignment and add accessors Andre Przywara
2014-10-15 16:25 ` Christoffer Dall [this message]
2014-10-31 14:06 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 02/15] arm/arm64: KVM: pass down user space provided GIC type into vGIC code Andre Przywara
2014-10-15 16:25 ` Christoffer Dall
2014-08-21 13:06 ` [PATCH v2 03/15] arm/arm64: KVM: refactor vgic_handle_mmio() function Andre Przywara
2014-09-04 7:52 ` wanghaibin
2014-10-15 16:25 ` Christoffer Dall
2014-10-31 13:42 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 04/15] arm/arm64: KVM: wrap 64 bit MMIO accesses with two 32 bit ones Andre Przywara
2014-10-15 16:26 ` Christoffer Dall
2014-10-31 13:49 ` Andre Przywara
2014-11-03 9:54 ` Christoffer Dall
2014-08-21 13:06 ` [PATCH v2 05/15] arm/arm64: KVM: introduce per-VM ops Andre Przywara
2014-10-15 16:27 ` Christoffer Dall
2014-10-31 13:59 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 06/15] arm/arm64: KVM: make the maximum number of vCPUs a per-VM value Andre Przywara
2014-10-15 16:27 ` Christoffer Dall
2014-10-31 14:10 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 07/15] arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable Andre Przywara
2014-10-15 16:27 ` Christoffer Dall
2014-08-21 13:06 ` [PATCH v2 08/15] arm/arm64: KVM: refactor MMIO accessors Andre Przywara
2014-08-21 13:06 ` [PATCH v2 09/15] arm/arm64: KVM: refactor/wrap vgic_set/get_attr() Andre Przywara
2014-08-21 13:06 ` [PATCH v2 10/15] arm/arm64: KVM: split GICv2 specific emulation code from vgic.c Andre Przywara
2014-08-21 13:06 ` [PATCH v2 11/15] arm/arm64: KVM: add opaque private pointer to MMIO accessors Andre Przywara
2014-08-21 13:06 ` [PATCH v2 12/15] arm/arm64: KVM: add virtual GICv3 distributor emulation Andre Przywara
2014-09-05 3:28 ` wanghaibin
2014-09-05 8:13 ` Andre Przywara
2014-08-21 13:06 ` [PATCH v2 13/15] arm/arm64: KVM: add SGI system register trapping Andre Przywara
2014-08-21 13:06 ` [PATCH v2 14/15] arm/arm64: KVM: enable kernel side of GICv3 emulation Andre Przywara
2014-08-21 13:06 ` [PATCH v2 15/15] arm/arm64: KVM: allow userland to request a virtual GICv3 Andre Przywara
2014-09-20 1:15 ` wanghaibin
2014-10-08 4:08 ` [PATCH v2 00/15] KVM GICv3 emulation wanghaibin
2014-10-08 8:41 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141015162523.GB14272@lvm \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).