From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawn.guo@linaro.org (Shawn Guo) Date: Sun, 19 Oct 2014 10:39:16 +0800 Subject: [PATCH v2] ARM: imx6q-pcie doc: Update the clocks descriptions to use defines In-Reply-To: <1413392612-6594-1-git-send-email-festevam@gmail.com> References: <1413392612-6594-1-git-send-email-festevam@gmail.com> Message-ID: <20141019023915.GH7869@tiger> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Oct 15, 2014 at 02:03:32PM -0300, Fabio Estevam wrote: > From: Fabio Estevam > > Let's make the imx6q-pcie example to actually match the usage on imx6qdl.dtsi > by providing the clock names via defines rather than hardcoded numbers. > > Signed-off-by: Fabio Estevam > --- > Changes since v1: > - Adjust the Subject and send it to Shawn Sorry. I do not think it's a really necessary change. Shawn > > Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > index 6fbba53..0b28b52 100644 > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt > @@ -35,6 +35,8 @@ Example: > <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, > <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, > <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; > - clocks = <&clks 144>, <&clks 206>, <&clks 189>; > + clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, > + <&clks IMX6QDL_CLK_LVDS1_GATE>, > + <&clks IMX6QDL_CLK_PCIE_REF_125M>; > clock-names = "pcie", "pcie_bus", "pcie_phy"; > }; > -- > 1.9.1 >