From mboxrd@z Thu Jan  1 00:00:00 1970
From: lee.jones@linaro.org (Lee Jones)
Date: Tue, 21 Oct 2014 11:15:03 +0100
Subject: [RFC Patch 1/4] mfd: AXP20x: Add power supply bindings
 documentation
In-Reply-To: <20141020223314.0484f795@neptune.home>
References: <20141020221959.2f312906@neptune.home>
 <20141020223314.0484f795@neptune.home>
Message-ID: <20141021101503.GE26842@x1>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Mon, 20 Oct 2014, Bruno Pr?mont wrote:

> 
> ---
> Note: the OCV values seem to have some defaults build into the
> PMIC though may need adjustment if the used battery has a different
> open circuit voltage curve.
> As far as understood (these values are set in vendor driver but not
> mentioned in chip documentation) they represent charge percentage
> for some predefined voltages.
> 
> If prefixing these values with "x-power," is preferred the following
> patch should becomes a dependency:
>   http://lists.infradead.org/pipermail/linux-arm-kernel/2014-June/267606.html
> and users in patch 2/4, 4/4 need adjusting.
> 
> 
>  Documentation/devicetree/bindings/mfd/axp20x.txt |   20 +
>  1 files changed, 20 insertions(+), 0 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
> index cc9e01b..8ea681c 100644
> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt
> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
> @@ -28,6 +28,20 @@ Required properties:
>  		      (range: 750-1875). Default: 1.5MHz
>  
>  Optional properties for DCDCs:
> +- backup: Settings for backup/RTC battery charger
> +	  (Voltage in ?V, current in ?A)
> +	  If not present, charger will be left untouched
> +- battery.ocv: OCV capacity curve points (16 data values)
> +- battery.resistance: internal battery resistance in m?
> +                      (defaults to 100m?)
> +- battery.capacity: Battery capacity in mAh
> +		    If this attribute is missing, charger will be disabled
> +		    unless there is a battery connected.
> +- battery.temp_sensor: Description of temperautre sensor, 3 values
> +		       - driver current (20?A, 40?A, 60?A or 80?A)
> +		       - low temperature warning level (in ?V)
> +		       - high temperature warning level (in ?V)
> +		       If missing, temperature sensor gets disabled
>  - x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO mode
>  			  Default: AUTO mode
>  
> @@ -49,6 +63,12 @@ axp209: pmic at 34 {
>  	ldo3in-supply = <&axp_ipsout_reg>;
>  	ldo5in-supply = <&axp_ipsout_reg>;
>  
> +	backup = <3000000 200>;
> +	battery.ocv = <0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0>;
> +	battery.resistance = <0>;
> +	battery.capacity = <2000>;
> +	battery.temp_sensor = <20 1000000 4000000>;

Since when do we use '.'s in property names?

>  	regulators {
>  		x-powers,dcdc-freq = <1500>;
>  

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog