From mboxrd@z Thu Jan 1 00:00:00 1970 From: boris.brezillon@free-electrons.com (Boris Brezillon) Date: Tue, 21 Oct 2014 15:58:41 +0200 Subject: [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc In-Reply-To: <62d54110-9c7f-4342-9201-a1ae23194620@googlegroups.com> References: <1413805520-14947-1-git-send-email-boris.brezillon@free-electrons.com> <1413805520-14947-3-git-send-email-boris.brezillon@free-electrons.com> <20141021024134.GC1193@ld-irv-0074> <20141021145344.575b19e6@bbrezillon> <62d54110-9c7f-4342-9201-a1ae23194620@googlegroups.com> Message-ID: <20141021155841.180861d0@bbrezillon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, 21 Oct 2014 06:13:16 -0700 (PDT) Ezaul Zillmer wrote: > Hello everyone > > Boris Brezillon > > downloaded sunxi-nand-v6 now compiled for Cubieboard2 > https://github.com/bbrezillon/linux-sunxi.git sunxi b-nand-v6 > > u-boot > git clone https://github.com/jwrdegoede/u-boot-b sunxi.git sunxi-wip > > > [1.143903] nand: Could not find valid JEDEC parameter page; aborting > [1.150369] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd7 > [1.156766] nand: Samsung NAND 4GiB 3.3V 8-bit > [1.161214] nand: 4096MiB, MLC, page size: 8192, OOB size: 640 > [1.167167] sunxi_nand 1c03000.nand: ECC init failed: -22 > [1.172588] sunxi_nand 1c03000.nand: failed to init nand chips > [1.178502] sunxi_nand: probe of 1c03000.nand failed with error -22 > > need some more data? > Can you try to apply this patch [1] ? [1]http://code.bulix.org/26bi35-87234 -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com