From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH resend] ARM: perf: remove useless return and check of idx in counter handling
Date: Wed, 22 Oct 2014 13:31:54 +0100 [thread overview]
Message-ID: <20141022123153.GH22642@leverpostej> (raw)
In-Reply-To: <1413980209-14913-1-git-send-email-chaiw.fnst@cn.fujitsu.com>
On Wed, Oct 22, 2014 at 01:16:49PM +0100, chai wen wrote:
> Idx sanity check was once implemented separately in these counter
> handling functions and then return value was treated as a judgement.
> armv7_pmnc_select_counter()
> armv7_pmnc_enable_counter()
> armv7_pmnc_disable_counter()
> armv7_pmnc_enable_intens()
> armv7_pmnc_disable_intens()
> But we do not need to do this now, as idx validation check was moved
> out all these functions by commit 7279adbd9bb8ef8f(ARM: perf: check ARMv7
> counter validity on a per-pmu basis).
> Let's remove the useless return of idx from these functions.
In future when you fix up a patch, please send as "PATCHv2" (or v3, etc
as appropriate), and only as "PATCH RESEND" if there are no changes. It
makes it far easier to keep track of the stat of the patch. Don't worry
about sending again this time, however.
Thanks for fixing up the braces since v1; this looks good to me.
Mark.
>
> Acked-by: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: chai wen <chaiw.fnst@cn.fujitsu.com>
> ---
> arch/arm/kernel/perf_event_v7.c | 40 +++++++++++++++++---------------------
> 1 files changed, 18 insertions(+), 22 deletions(-)
>
> diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
> index 116758b..aaf5314 100644
> --- a/arch/arm/kernel/perf_event_v7.c
> +++ b/arch/arm/kernel/perf_event_v7.c
> @@ -564,13 +564,11 @@ static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx)
> return pmnc & BIT(ARMV7_IDX_TO_COUNTER(idx));
> }
>
> -static inline int armv7_pmnc_select_counter(int idx)
> +static inline void armv7_pmnc_select_counter(int idx)
> {
> u32 counter = ARMV7_IDX_TO_COUNTER(idx);
> asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter));
> isb();
> -
> - return idx;
> }
>
> static inline u32 armv7pmu_read_counter(struct perf_event *event)
> @@ -580,13 +578,15 @@ static inline u32 armv7pmu_read_counter(struct perf_event *event)
> int idx = hwc->idx;
> u32 value = 0;
>
> - if (!armv7_pmnc_counter_valid(cpu_pmu, idx))
> + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
> pr_err("CPU%u reading wrong counter %d\n",
> smp_processor_id(), idx);
> - else if (idx == ARMV7_IDX_CYCLE_COUNTER)
> + } else if (idx == ARMV7_IDX_CYCLE_COUNTER) {
> asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
> - else if (armv7_pmnc_select_counter(idx) == idx)
> + } else {
> + armv7_pmnc_select_counter(idx);
> asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value));
> + }
>
> return value;
> }
> @@ -597,45 +597,43 @@ static inline void armv7pmu_write_counter(struct perf_event *event, u32 value)
> struct hw_perf_event *hwc = &event->hw;
> int idx = hwc->idx;
>
> - if (!armv7_pmnc_counter_valid(cpu_pmu, idx))
> + if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
> pr_err("CPU%u writing wrong counter %d\n",
> smp_processor_id(), idx);
> - else if (idx == ARMV7_IDX_CYCLE_COUNTER)
> + } else if (idx == ARMV7_IDX_CYCLE_COUNTER) {
> asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
> - else if (armv7_pmnc_select_counter(idx) == idx)
> + } else {
> + armv7_pmnc_select_counter(idx);
> asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value));
> + }
> }
>
> static inline void armv7_pmnc_write_evtsel(int idx, u32 val)
> {
> - if (armv7_pmnc_select_counter(idx) == idx) {
> - val &= ARMV7_EVTYPE_MASK;
> - asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
> - }
> + armv7_pmnc_select_counter(idx);
> + val &= ARMV7_EVTYPE_MASK;
> + asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
> }
>
> -static inline int armv7_pmnc_enable_counter(int idx)
> +static inline void armv7_pmnc_enable_counter(int idx)
> {
> u32 counter = ARMV7_IDX_TO_COUNTER(idx);
> asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter)));
> - return idx;
> }
>
> -static inline int armv7_pmnc_disable_counter(int idx)
> +static inline void armv7_pmnc_disable_counter(int idx)
> {
> u32 counter = ARMV7_IDX_TO_COUNTER(idx);
> asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter)));
> - return idx;
> }
>
> -static inline int armv7_pmnc_enable_intens(int idx)
> +static inline void armv7_pmnc_enable_intens(int idx)
> {
> u32 counter = ARMV7_IDX_TO_COUNTER(idx);
> asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter)));
> - return idx;
> }
>
> -static inline int armv7_pmnc_disable_intens(int idx)
> +static inline void armv7_pmnc_disable_intens(int idx)
> {
> u32 counter = ARMV7_IDX_TO_COUNTER(idx);
> asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
> @@ -643,8 +641,6 @@ static inline int armv7_pmnc_disable_intens(int idx)
> /* Clear the overflow flag in case an interrupt is pending. */
> asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
> isb();
> -
> - return idx;
> }
>
> static inline u32 armv7_pmnc_getreset_flags(void)
> --
> 1.7.1
>
>
next prev parent reply other threads:[~2014-10-22 12:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-22 12:16 [PATCH resend] ARM: perf: remove useless return and check of idx in counter handling chai wen
2014-10-22 12:31 ` Mark Rutland [this message]
2014-10-23 1:28 ` Chai Wen
2014-10-24 7:26 ` Chai Wen
2014-10-27 11:54 ` Will Deacon
2014-10-28 2:57 ` Chai Wen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141022123153.GH22642@leverpostej \
--to=mark.rutland@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).