[PATCH v2 08/47] kernel: Move pm_power_off to common code

[PATCH v2 08/47] kernel: Move pm_power_off to common code

[Guenter Roeck]

pm_power_off is defined for all architectures. Move it to common code.

Have all architectures call do_kernel_power_off instead of pm_power_off.
Some architectures point pm_power_off to machine_power_off. For those,
call do_kernel_power_off from machine_power_off instead.

Acked-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v2:
- do_kernel_poweroff -> do_kernel_power_off
- have_kernel_poweroff -> have_kernel_power_off

 arch/alpha/kernel/process.c        |  9 +++------
 arch/arc/kernel/reset.c            |  5 +----
 arch/arm/kernel/process.c          |  5 +----
 arch/arm64/kernel/process.c        |  5 +----
 arch/avr32/kernel/process.c        |  6 +-----
 arch/blackfin/kernel/process.c     |  3 ---
 arch/blackfin/kernel/reboot.c      |  2 ++
 arch/c6x/kernel/process.c          |  9 +--------
 arch/cris/kernel/process.c         |  4 +---
 arch/frv/kernel/process.c          |  5 ++---
 arch/hexagon/kernel/reset.c        |  5 ++---
 arch/ia64/kernel/process.c         |  5 +----
 arch/m32r/kernel/process.c         |  8 ++++----
 arch/m68k/kernel/process.c         |  6 +-----
 arch/metag/kernel/process.c        |  6 +-----
 arch/microblaze/kernel/process.c   |  3 ---
 arch/microblaze/kernel/reset.c     |  1 +
 arch/mips/kernel/reset.c           |  6 +-----
 arch/mn10300/kernel/process.c      |  8 ++------
 arch/openrisc/kernel/process.c     |  8 +++++---
 arch/parisc/kernel/process.c       |  8 ++++----
 arch/powerpc/kernel/setup-common.c |  6 +++---
 arch/s390/kernel/setup.c           |  8 ++------
 arch/score/kernel/process.c        |  8 ++++----
 arch/sh/kernel/reboot.c            |  6 +-----
 arch/sparc/kernel/process_32.c     | 10 ++--------
 arch/sparc/kernel/reboot.c         |  8 ++------
 arch/tile/kernel/reboot.c          |  7 +++----
 arch/um/kernel/reboot.c            |  2 --
 arch/unicore32/kernel/process.c    |  9 +--------
 arch/x86/kernel/reboot.c           | 11 +++--------
 arch/x86/xen/enlighten.c           |  3 +--
 arch/xtensa/kernel/process.c       |  4 ----
 drivers/parisc/power.c             |  3 +--
 kernel/power/poweroff_handler.c    |  8 ++++++++
 kernel/reboot.c                    |  4 ++--
 36 files changed, 68 insertions(+), 146 deletions(-)

diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 1941a07..81c43f8 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -24,6 +24,7 @@
 #include <linux/vt.h>
 #include <linux/mman.h>
 #include <linux/elfcore.h>
+#include <linux/pm.h>
 #include <linux/reboot.h>
 #include <linux/tty.h>
 #include <linux/console.h>
@@ -40,12 +41,6 @@
 #include "proto.h"
 #include "pci_impl.h"
 
-/*
- * Power off function, if any
- */
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
 #ifdef CONFIG_ALPHA_WTINT
 /*
  * Sleep the CPU.
@@ -184,6 +179,8 @@ machine_halt(void)
 void
 machine_power_off(void)
 {
+	do_kernel_power_off();
+
 	common_shutdown(LINUX_REBOOT_CMD_POWER_OFF, NULL);
 }
 
diff --git a/arch/arc/kernel/reset.c b/arch/arc/kernel/reset.c
index 2768fa1..0758d9d 100644
--- a/arch/arc/kernel/reset.c
+++ b/arch/arc/kernel/reset.c
@@ -26,9 +26,6 @@ void machine_restart(char *__unused)
 
 void machine_power_off(void)
 {
-	/* FIXME ::  power off ??? */
+	do_kernel_power_off();
 	machine_halt();
 }
-
-void (*pm_power_off) (void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index fe972a2..aa3f656 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -117,8 +117,6 @@ void soft_restart(unsigned long addr)
 /*
  * Function pointers to optional machine specific functions
  */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
 
 void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
 
@@ -205,8 +203,7 @@ void machine_power_off(void)
 	local_irq_disable();
 	smp_send_stop();
 
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
 
 /*
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index c3065db..46a483a 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -68,8 +68,6 @@ void soft_restart(unsigned long addr)
 /*
  * Function pointers to optional machine specific functions
  */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL_GPL(pm_power_off);
 
 void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
 
@@ -129,8 +127,7 @@ void machine_power_off(void)
 {
 	local_irq_disable();
 	smp_send_stop();
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
 
 /*
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 42a53e74..529c1f6 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -23,9 +23,6 @@
 
 #include <mach/pm.h>
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 /*
  * This file handles the architecture-dependent parts of process handling..
  */
@@ -48,8 +45,7 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
 
 void machine_restart(char *cmd)
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 4aa5545..812dd83 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -39,9 +39,6 @@ int nr_l1stack_tasks;
 void *l1_stack_base;
 unsigned long l1_stack_len;
 
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
 /*
  * The idle loop on BFIN
  */
diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c
index c4f50a3..387d610 100644
--- a/arch/blackfin/kernel/reboot.c
+++ b/arch/blackfin/kernel/reboot.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/pm.h>
 #include <asm/bfin-global.h>
 #include <asm/reboot.h>
 #include <asm/bfrom.h>
@@ -106,6 +107,7 @@ void machine_halt(void)
 __attribute__((weak))
 void native_machine_power_off(void)
 {
+	do_kernel_power_off();
 	idle_with_irq_disabled();
 }
 
diff --git a/arch/c6x/kernel/process.c b/arch/c6x/kernel/process.c
index 57d2ea8..edf7e5a 100644
--- a/arch/c6x/kernel/process.c
+++ b/arch/c6x/kernel/process.c
@@ -27,12 +27,6 @@ void	(*c6x_halt)(void);
 extern asmlinkage void ret_from_fork(void);
 extern asmlinkage void ret_from_kernel_thread(void);
 
-/*
- * power off function, if any
- */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 void arch_cpu_idle(void)
 {
 	unsigned long tmp;
@@ -73,8 +67,7 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	halt_loop();
 }
 
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index b78498e..9ebd76b 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -31,9 +31,6 @@
 
 extern void default_idle(void);
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 void arch_cpu_idle(void)
 {
 	default_idle();
@@ -60,6 +57,7 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
+	do_kernel_power_off();
 }
 
 /*
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
index 5d40aeb77..502dabb 100644
--- a/arch/frv/kernel/process.c
+++ b/arch/frv/kernel/process.c
@@ -42,9 +42,6 @@ asmlinkage void ret_from_kernel_thread(void);
 
 #include <asm/pgalloc.h>
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 static void core_sleep_idle(void)
 {
 #ifdef LED_DEBUG_SLEEP
@@ -107,6 +104,8 @@ void machine_power_off(void)
 	gdbstub_exit(0);
 #endif
 
+	do_kernel_power_off();
+
 	for (;;);
 }
 
diff --git a/arch/hexagon/kernel/reset.c b/arch/hexagon/kernel/reset.c
index 76483c1..6f607b6 100644
--- a/arch/hexagon/kernel/reset.c
+++ b/arch/hexagon/kernel/reset.c
@@ -16,11 +16,13 @@
  * 02110-1301, USA.
  */
 
+#include <linux/pm.h>
 #include <linux/smp.h>
 #include <asm/hexagon_vm.h>
 
 void machine_power_off(void)
 {
+	do_kernel_power_off();
 	smp_send_stop();
 	__vmstop();
 }
@@ -32,6 +34,3 @@ void machine_halt(void)
 void machine_restart(char *cmd)
 {
 }
-
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index b515149..88121a2 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -57,8 +57,6 @@ void (*ia64_mark_idle)(int);
 
 unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
 EXPORT_SYMBOL(boot_option_idle_override);
-void (*pm_power_off) (void);
-EXPORT_SYMBOL(pm_power_off);
 
 void
 ia64_do_show_stack (struct unw_frame_info *info, void *arg)
@@ -675,8 +673,7 @@ machine_halt (void)
 void
 machine_power_off (void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	machine_halt();
 }
 
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index e69221d..65a037e 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -23,6 +23,7 @@
 #include <linux/fs.h>
 #include <linux/slab.h>
 #include <linux/module.h>
+#include <linux/pm.h>
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/hardirq.h>
@@ -44,9 +45,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return tsk->thread.lr;
 }
 
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
 void machine_restart(char *__unused)
 {
 #if defined(CONFIG_PLAT_MAPPI3)
@@ -67,7 +65,9 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	/* M32R_FIXME */
+	do_kernel_power_off();
+	for (;;)
+		;
 }
 
 void show_regs(struct pt_regs * regs)
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index afe3d6e..bbc0a63 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -78,14 +78,10 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	for (;;);
 }
 
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
 void show_regs(struct pt_regs * regs)
 {
 	printk("\n");
diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
index 483dff9..8d95773 100644
--- a/arch/metag/kernel/process.c
+++ b/arch/metag/kernel/process.c
@@ -67,9 +67,6 @@ void arch_cpu_idle_dead(void)
 }
 #endif
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 void (*soc_restart)(char *cmd);
 void (*soc_halt)(void);
 
@@ -90,8 +87,7 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	smp_send_stop();
 	hard_processor_halt(HALT_OK);
 }
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index b2dd371..0ebca36 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -44,9 +44,6 @@ void show_regs(struct pt_regs *regs)
 				regs->msr, regs->ear, regs->esr, regs->fsr);
 }
 
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
 void flush_thread(void)
 {
 }
diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
index fbe58c6..2c6b32c 100644
--- a/arch/microblaze/kernel/reset.c
+++ b/arch/microblaze/kernel/reset.c
@@ -103,6 +103,7 @@ void machine_halt(void)
 void machine_power_off(void)
 {
 	pr_notice("Machine power off...\n");
+	do_kernel_power_off();
 	while (1)
 		;
 }
diff --git a/arch/mips/kernel/reset.c b/arch/mips/kernel/reset.c
index 07fc524..09e74d2 100644
--- a/arch/mips/kernel/reset.c
+++ b/arch/mips/kernel/reset.c
@@ -21,9 +21,6 @@
  */
 void (*_machine_restart)(char *command);
 void (*_machine_halt)(void);
-void (*pm_power_off)(void);
-
-EXPORT_SYMBOL(pm_power_off);
 
 void machine_restart(char *command)
 {
@@ -39,6 +36,5 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 3707da5..c78b2eb 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -20,6 +20,7 @@
 #include <linux/user.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/pm.h>
 #include <linux/reboot.h>
 #include <linux/percpu.h>
 #include <linux/err.h>
@@ -45,12 +46,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 }
 
 /*
- * power off function, if any
- */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-/*
  * On SMP it's slightly faster (but much more power-consuming!)
  * to poll the ->work.need_resched flag instead of waiting for the
  * cross-CPU IPI to arrive. Use this option with caution.
@@ -93,6 +88,7 @@ void machine_power_off(void)
 #ifdef CONFIG_KERNEL_DEBUGGER
 	gdbstub_exit(0);
 #endif
+	do_kernel_power_off();
 }
 
 void show_regs(struct pt_regs *regs)
diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c
index 386af25..494afd2 100644
--- a/arch/openrisc/kernel/process.c
+++ b/arch/openrisc/kernel/process.c
@@ -25,6 +25,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mm.h>
+#include <linux/pm.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
@@ -51,7 +52,7 @@
  */
 struct thread_info *current_thread_info_set[NR_CPUS] = { &init_thread_info, };
 
-void machine_restart(void)
+void machine_restart(char *cmd)
 {
 	printk(KERN_INFO "*** MACHINE RESTART ***\n");
 	__asm__("l.nop 1");
@@ -72,11 +73,12 @@ void machine_halt(void)
 void machine_power_off(void)
 {
 	printk(KERN_INFO "*** MACHINE POWER OFF ***\n");
+
+	do_kernel_power_off();
+
 	__asm__("l.nop 1");
 }
 
-void (*pm_power_off) (void) = machine_power_off;
-
 /*
  * When a process does an "exec", machine state like FPU and debug
  * registers need to be reset.  This is a hook function for that.
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 0bbbf0d..3f5d14a 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -41,6 +41,7 @@
 #include <linux/fs.h>
 #include <linux/module.h>
 #include <linux/personality.h>
+#include <linux/pm.h>
 #include <linux/ptrace.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -133,7 +134,9 @@ void machine_power_off(void)
 	pdc_soft_power_button(0);
 	
 	pdc_chassis_send_status(PDC_CHASSIS_DIRECT_SHUTDOWN);
-		
+
+	do_kernel_power_off();
+
 	/* It seems we have no way to power the system off via
 	 * software. The user has to press the button himself. */
 
@@ -141,9 +144,6 @@ void machine_power_off(void)
 	       "Please power this system off now.");
 }
 
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
 /*
  * Free current thread data structures etc..
  */
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 1362cd6..5b7a851 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -141,6 +141,9 @@ void machine_power_off(void)
 	machine_shutdown();
 	if (ppc_md.power_off)
 		ppc_md.power_off();
+
+	do_kernel_power_off();
+
 #ifdef CONFIG_SMP
 	smp_send_stop();
 #endif
@@ -151,9 +154,6 @@ void machine_power_off(void)
 /* Used by the G5 thermal driver */
 EXPORT_SYMBOL_GPL(machine_power_off);
 
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL_GPL(pm_power_off);
-
 void machine_halt(void)
 {
 	machine_shutdown();
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index e80d9ff..267e025 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -263,13 +263,9 @@ void machine_power_off(void)
 		 */
 		console_unblank();
 	_machine_power_off();
-}
 
-/*
- * Dummy power off function.
- */
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL_GPL(pm_power_off);
+	do_kernel_power_off();
+}
 
 static int __init early_parse_mem(char *p)
 {
diff --git a/arch/score/kernel/process.c b/arch/score/kernel/process.c
index a1519ad3..b76ea67 100644
--- a/arch/score/kernel/process.c
+++ b/arch/score/kernel/process.c
@@ -29,9 +29,6 @@
 #include <linux/pm.h>
 #include <linux/rcupdate.h>
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 /* If or when software machine-restart is implemented, add code here. */
 void machine_restart(char *command) {}
 
@@ -39,7 +36,10 @@ void machine_restart(char *command) {}
 void machine_halt(void) {}
 
 /* If or when software machine-power-off is implemented, add code here. */
-void machine_power_off(void) {}
+void machine_power_off(void)
+{
+	do_kernel_power_off();
+}
 
 void ret_from_fork(void);
 void ret_from_kernel_thread(void);
diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c
index 04afe5b..065de12 100644
--- a/arch/sh/kernel/reboot.c
+++ b/arch/sh/kernel/reboot.c
@@ -11,9 +11,6 @@
 #include <asm/tlbflush.h>
 #include <asm/traps.h>
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 #ifdef CONFIG_SUPERH32
 static void watchdog_trigger_immediate(void)
 {
@@ -51,8 +48,7 @@ static void native_machine_shutdown(void)
 
 static void native_machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 }
 
 static void native_machine_halt(void)
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index 50e7b62..cb8148a 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -48,14 +48,6 @@
  */
 void (*sparc_idle)(void);
 
-/* 
- * Power-off handler instantiation for pm.h compliance
- * This is done via auxio, but could be used as a fallback
- * handler when auxio is not present-- unused for now...
- */
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
 /*
  * sysctl - toggle power-off restriction for serial console 
  * systems in machine_power_off()
@@ -112,6 +104,8 @@ void machine_power_off(void)
 		sbus_writeb(power_register, auxio_power_register);
 	}
 
+	do_kernel_power_off();
+
 	machine_halt();
 }
 
diff --git a/arch/sparc/kernel/reboot.c b/arch/sparc/kernel/reboot.c
index eba7d91..3c0bb03 100644
--- a/arch/sparc/kernel/reboot.c
+++ b/arch/sparc/kernel/reboot.c
@@ -16,17 +16,13 @@
  */
 int scons_pwroff = 1;
 
-/* This isn't actually used, it exists merely to satisfy the
- * reference in kernel/sys.c
- */
-void (*pm_power_off)(void) = machine_power_off;
-EXPORT_SYMBOL(pm_power_off);
-
 void machine_power_off(void)
 {
 	if (strcmp(of_console_device->type, "serial") || scons_pwroff)
 		prom_halt_power_off();
 
+	do_kernel_power_off();
+
 	prom_halt();
 }
 
diff --git a/arch/tile/kernel/reboot.c b/arch/tile/kernel/reboot.c
index 6c5d2c0..8ff4a7f 100644
--- a/arch/tile/kernel/reboot.c
+++ b/arch/tile/kernel/reboot.c
@@ -36,6 +36,9 @@ void machine_power_off(void)
 {
 	arch_local_irq_disable_all();
 	smp_send_stop();
+
+	do_kernel_power_off();
+
 	hv_power_off();
 }
 
@@ -45,7 +48,3 @@ void machine_restart(char *cmd)
 	smp_send_stop();
 	hv_restart((HV_VirtAddr) "vmlinux", (HV_VirtAddr) cmd);
 }
-
-/* No interesting distinction to be made here. */
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
diff --git a/arch/um/kernel/reboot.c b/arch/um/kernel/reboot.c
index ced8903..a82ef28 100644
--- a/arch/um/kernel/reboot.c
+++ b/arch/um/kernel/reboot.c
@@ -11,8 +11,6 @@
 #include <os.h>
 #include <skas.h>
 
-void (*pm_power_off)(void);
-
 static void kill_off_processes(void)
 {
 	if (proc_mm)
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
index b008e99..9490dd5 100644
--- a/arch/unicore32/kernel/process.c
+++ b/arch/unicore32/kernel/process.c
@@ -56,16 +56,9 @@ void machine_halt(void)
 	gpio_set_value(GPO_SOFT_OFF, 0);
 }
 
-/*
- * Function pointers to optional machine specific functions
- */
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
 void machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	machine_halt();
 }
 
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 17962e6..5c09e28 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -30,12 +30,6 @@
 #include <asm/x86_init.h>
 #include <asm/efi.h>
 
-/*
- * Power off function, if any
- */
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
 static const struct desc_ptr no_idt = {};
 
 /*
@@ -647,11 +641,12 @@ static void native_machine_halt(void)
 
 static void native_machine_power_off(void)
 {
-	if (pm_power_off) {
+	if (have_kernel_power_off()) {
 		if (!reboot_force)
 			machine_shutdown();
-		pm_power_off();
+		do_kernel_power_off();
 	}
+
 	/* A fallback in case there is no PM info available */
 	tboot_shutdown(TB_SHUTDOWN_HALT);
 }
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 1a3f044..c2c1d74 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1320,8 +1320,7 @@ static void xen_machine_halt(void)
 
 static void xen_machine_power_off(void)
 {
-	if (pm_power_off)
-		pm_power_off();
+	do_kernel_power_off();
 	xen_reboot(SHUTDOWN_poweroff);
 }
 
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index 1c85323..c487296 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -49,10 +49,6 @@ extern void ret_from_kernel_thread(void);
 
 struct task_struct *current_set[NR_CPUS] = {&init_task, };
 
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-
 #if XTENSA_HAVE_COPROCESSORS
 
 void coprocessor_release_all(struct thread_info *ti)
diff --git a/drivers/parisc/power.c b/drivers/parisc/power.c
index ef31b77..f10cf92 100644
--- a/drivers/parisc/power.c
+++ b/drivers/parisc/power.c
@@ -95,8 +95,7 @@ static void process_shutdown(void)
 		/* send kill signal */
 		if (kill_cad_pid(SIGINT, 1)) {
 			/* just in case killing init process failed */
-			if (pm_power_off)
-				pm_power_off();
+			kernel_power_off();
 		}
 	}
 }
diff --git a/kernel/power/poweroff_handler.c b/kernel/power/poweroff_handler.c
index aeb4736..37f0b88 100644
--- a/kernel/power/poweroff_handler.c
+++ b/kernel/power/poweroff_handler.c
@@ -22,6 +22,12 @@
 #include <linux/types.h>
 
 /*
+ * If set, calling this function will power off the system immediately.
+ */
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
+/*
  *	Notifier list for kernel code which wants to be called
  *	to power off the system.
  */
@@ -236,6 +242,8 @@ EXPORT_SYMBOL(devm_register_power_off_handler);
 void do_kernel_power_off(void)
 {
 	spin_lock(&power_off_handler_lock);
+	if (pm_power_off)
+		pm_power_off();
 	raw_notifier_call_chain(&power_off_handler_list, 0, NULL);
 	spin_unlock(&power_off_handler_lock);
 }
diff --git a/kernel/reboot.c b/kernel/reboot.c
index 5925f5a..0930851 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -306,9 +306,9 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
 		return ret;
 
 	/* Instead of trying to make the power_off code look like
-	 * halt when pm_power_off is not set do it the easy way.
+	 * halt when no poweroff handler exists do it the easy way.
 	 */
-	if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
+	if (cmd == LINUX_REBOOT_CMD_POWER_OFF && !have_kernel_power_off())
 		cmd = LINUX_REBOOT_CMD_HALT;
 
 	mutex_lock(&reboot_mutex);
-- 
1.9.1

[PATCH v2 08/47] kernel: Move pm_power_off to common code

[Ralf Baechle]

On Mon, Oct 20, 2014 at 09:12:24PM -0700, Guenter Roeck wrote:

> pm_power_off is defined for all architectures. Move it to common code.
> 
> Have all architectures call do_kernel_power_off instead of pm_power_off.
> Some architectures point pm_power_off to machine_power_off. For those,
> call do_kernel_power_off from machine_power_off instead.
> 
> Acked-by: David Vrabel <david.vrabel@citrix.com>
> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Acked-by: Hirokazu Takata <takata@linux-m32r.org>
> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
> Acked-by: Richard Weinberger <richard@nod.at>
> Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Acked-by: Ralf Baechle <ralf@linux-mips.org>

[PATCH v2 08/47] kernel: Move pm_power_off to common code

[Guenter Roeck]

On Wed, Oct 22, 2014 at 05:31:36PM +0200, Ralf Baechle wrote:
> On Mon, Oct 20, 2014 at 09:12:24PM -0700, Guenter Roeck wrote:
> 
> > pm_power_off is defined for all architectures. Move it to common code.
> > 
> > Have all architectures call do_kernel_power_off instead of pm_power_off.
> > Some architectures point pm_power_off to machine_power_off. For those,
> > call do_kernel_power_off from machine_power_off instead.
> > 
> > Acked-by: David Vrabel <david.vrabel@citrix.com>
> > Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
> > Acked-by: Hirokazu Takata <takata@linux-m32r.org>
> > Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
> > Acked-by: Max Filippov <jcmvbkbc@gmail.com>
> > Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
> > Acked-by: Richard Weinberger <richard@nod.at>
> > Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
> > Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> 
> Acked-by: Ralf Baechle <ralf@linux-mips.org>

Thanks!

Guenter

[PATCH v2 08/47] kernel: Move pm_power_off to common code

[James Hogan]

Hi Guenter,

On 21/10/14 05:12, Guenter Roeck wrote:
> pm_power_off is defined for all architectures. Move it to common code.
> 
> Have all architectures call do_kernel_power_off instead of pm_power_off.
> Some architectures point pm_power_off to machine_power_off. For those,
> call do_kernel_power_off from machine_power_off instead.
> 
> Acked-by: David Vrabel <david.vrabel@citrix.com>
> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Acked-by: Hirokazu Takata <takata@linux-m32r.org>
> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
> Acked-by: Richard Weinberger <richard@nod.at>
> Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>

For metag:
Acked-by: James Hogan <james.hogan@imgtec.com>

Thanks
James

> diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
> index 483dff9..8d95773 100644
> --- a/arch/metag/kernel/process.c
> +++ b/arch/metag/kernel/process.c
> @@ -67,9 +67,6 @@ void arch_cpu_idle_dead(void)
>  }
>  #endif
>  
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL(pm_power_off);
> -
>  void (*soc_restart)(char *cmd);
>  void (*soc_halt)(void);
>  
> @@ -90,8 +87,7 @@ void machine_halt(void)
>  
>  void machine_power_off(void)
>  {
> -	if (pm_power_off)
> -		pm_power_off();
> +	do_kernel_power_off();
>  	smp_send_stop();
>  	hard_processor_halt(HALT_OK);
>  }

[PATCH v2 08/47] kernel: Move pm_power_off to common code

[Guenter Roeck]

On Fri, Oct 24, 2014 at 10:47:03AM +0100, James Hogan wrote:
> Hi Guenter,
> 
> On 21/10/14 05:12, Guenter Roeck wrote:
> > pm_power_off is defined for all architectures. Move it to common code.
> > 
> > Have all architectures call do_kernel_power_off instead of pm_power_off.
> > Some architectures point pm_power_off to machine_power_off. For those,
> > call do_kernel_power_off from machine_power_off instead.
> > 
> > Acked-by: David Vrabel <david.vrabel@citrix.com>
> > Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
> > Acked-by: Hirokazu Takata <takata@linux-m32r.org>
> > Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
> > Acked-by: Max Filippov <jcmvbkbc@gmail.com>
> > Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
> > Acked-by: Richard Weinberger <richard@nod.at>
> > Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
> 
> For metag:
> Acked-by: James Hogan <james.hogan@imgtec.com>
> 
Thanks!

Guenter

[PATCH v2 08/47] kernel: Move pm_power_off to common code

[Lennox Wu]

Acked-by: Lennox Wu <lennox.wu@gmail.com>

2014-10-21 12:12 GMT+08:00 Guenter Roeck <linux@roeck-us.net>:
> pm_power_off is defined for all architectures. Move it to common code.
>
> Have all architectures call do_kernel_power_off instead of pm_power_off.
> Some architectures point pm_power_off to machine_power_off. For those,
> call do_kernel_power_off from machine_power_off instead.
>
> Acked-by: David Vrabel <david.vrabel@citrix.com>
> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Acked-by: Hirokazu Takata <takata@linux-m32r.org>
> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
> Acked-by: Richard Weinberger <richard@nod.at>
> Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> v2:
> - do_kernel_poweroff -> do_kernel_power_off
> - have_kernel_poweroff -> have_kernel_power_off
>
>  arch/alpha/kernel/process.c        |  9 +++------
>  arch/arc/kernel/reset.c            |  5 +----
>  arch/arm/kernel/process.c          |  5 +----
>  arch/arm64/kernel/process.c        |  5 +----
>  arch/avr32/kernel/process.c        |  6 +-----
>  arch/blackfin/kernel/process.c     |  3 ---
>  arch/blackfin/kernel/reboot.c      |  2 ++
>  arch/c6x/kernel/process.c          |  9 +--------
>  arch/cris/kernel/process.c         |  4 +---
>  arch/frv/kernel/process.c          |  5 ++---
>  arch/hexagon/kernel/reset.c        |  5 ++---
>  arch/ia64/kernel/process.c         |  5 +----
>  arch/m32r/kernel/process.c         |  8 ++++----
>  arch/m68k/kernel/process.c         |  6 +-----
>  arch/metag/kernel/process.c        |  6 +-----
>  arch/microblaze/kernel/process.c   |  3 ---
>  arch/microblaze/kernel/reset.c     |  1 +
>  arch/mips/kernel/reset.c           |  6 +-----
>  arch/mn10300/kernel/process.c      |  8 ++------
>  arch/openrisc/kernel/process.c     |  8 +++++---
>  arch/parisc/kernel/process.c       |  8 ++++----
>  arch/powerpc/kernel/setup-common.c |  6 +++---
>  arch/s390/kernel/setup.c           |  8 ++------
>  arch/score/kernel/process.c        |  8 ++++----
>  arch/sh/kernel/reboot.c            |  6 +-----
>  arch/sparc/kernel/process_32.c     | 10 ++--------
>  arch/sparc/kernel/reboot.c         |  8 ++------
>  arch/tile/kernel/reboot.c          |  7 +++----
>  arch/um/kernel/reboot.c            |  2 --
>  arch/unicore32/kernel/process.c    |  9 +--------
>  arch/x86/kernel/reboot.c           | 11 +++--------
>  arch/x86/xen/enlighten.c           |  3 +--
>  arch/xtensa/kernel/process.c       |  4 ----
>  drivers/parisc/power.c             |  3 +--
>  kernel/power/poweroff_handler.c    |  8 ++++++++
>  kernel/reboot.c                    |  4 ++--
>  36 files changed, 68 insertions(+), 146 deletions(-)
>
> diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
> index 1941a07..81c43f8 100644
> --- a/arch/alpha/kernel/process.c
> +++ b/arch/alpha/kernel/process.c
> @@ -24,6 +24,7 @@
>  #include <linux/vt.h>
>  #include <linux/mman.h>
>  #include <linux/elfcore.h>
> +#include <linux/pm.h>
>  #include <linux/reboot.h>
>  #include <linux/tty.h>
>  #include <linux/console.h>
> @@ -40,12 +41,6 @@
>  #include "proto.h"
>  #include "pci_impl.h"
>
> -/*
> - * Power off function, if any
> - */
> -void (*pm_power_off)(void) = machine_power_off;
> -EXPORT_SYMBOL(pm_power_off);
> -
>  #ifdef CONFIG_ALPHA_WTINT
>  /*
>   * Sleep the CPU.
> @@ -184,6 +179,8 @@ machine_halt(void)
>  void
>  machine_power_off(void)
>  {
> +       do_kernel_power_off();
> +
>         common_shutdown(LINUX_REBOOT_CMD_POWER_OFF, NULL);
>  }
>
> diff --git a/arch/arc/kernel/reset.c b/arch/arc/kernel/reset.c
> index 2768fa1..0758d9d 100644
> --- a/arch/arc/kernel/reset.c
> +++ b/arch/arc/kernel/reset.c
> @@ -26,9 +26,6 @@ void machine_restart(char *__unused)
>
>  void machine_power_off(void)
>  {
> -       /* FIXME ::  power off ??? */
> +       do_kernel_power_off();
>         machine_halt();
>  }
> -
> -void (*pm_power_off) (void) = NULL;
> -EXPORT_SYMBOL(pm_power_off);
> diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
> index fe972a2..aa3f656 100644
> --- a/arch/arm/kernel/process.c
> +++ b/arch/arm/kernel/process.c
> @@ -117,8 +117,6 @@ void soft_restart(unsigned long addr)
>  /*
>   * Function pointers to optional machine specific functions
>   */
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL(pm_power_off);
>
>  void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
>
> @@ -205,8 +203,7 @@ void machine_power_off(void)
>         local_irq_disable();
>         smp_send_stop();
>
> -       if (pm_power_off)
> -               pm_power_off();
> +       do_kernel_power_off();
>  }
>
>  /*
> diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
> index c3065db..46a483a 100644
> --- a/arch/arm64/kernel/process.c
> +++ b/arch/arm64/kernel/process.c
> @@ -68,8 +68,6 @@ void soft_restart(unsigned long addr)
>  /*
>   * Function pointers to optional machine specific functions
>   */
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL_GPL(pm_power_off);
>
>  void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
>
> @@ -129,8 +127,7 @@ void machine_power_off(void)
>  {
>         local_irq_disable();
>         smp_send_stop();
> -       if (pm_power_off)
> -               pm_power_off();
> +       do_kernel_power_off();
>  }
>
>  /*
> diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
> index 42a53e74..529c1f6 100644
> --- a/arch/avr32/kernel/process.c
> +++ b/arch/avr32/kernel/process.c
> @@ -23,9 +23,6 @@
>
>  #include <mach/pm.h>
>
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL(pm_power_off);
> -
>  /*
>   * This file handles the architecture-dependent parts of process handling..
>   */
> @@ -48,8 +45,7 @@ void machine_halt(void)
>
>  void machine_power_off(void)
>  {
> -       if (pm_power_off)
> -               pm_power_off();
> +       do_kernel_power_off();
>  }
>
>  void machine_restart(char *cmd)
> diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
> index 4aa5545..812dd83 100644
> --- a/arch/blackfin/kernel/process.c
> +++ b/arch/blackfin/kernel/process.c
> @@ -39,9 +39,6 @@ int nr_l1stack_tasks;
>  void *l1_stack_base;
>  unsigned long l1_stack_len;
>
> -void (*pm_power_off)(void) = NULL;
> -EXPORT_SYMBOL(pm_power_off);
> -
>  /*
>   * The idle loop on BFIN
>   */
> diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c
> index c4f50a3..387d610 100644
> --- a/arch/blackfin/kernel/reboot.c
> +++ b/arch/blackfin/kernel/reboot.c
> @@ -7,6 +7,7 @@
>   */
>
>  #include <linux/interrupt.h>
> +#include <linux/pm.h>
>  #include <asm/bfin-global.h>
>  #include <asm/reboot.h>
>  #include <asm/bfrom.h>
> @@ -106,6 +107,7 @@ void machine_halt(void)
>  __attribute__((weak))
>  void native_machine_power_off(void)
>  {
> +       do_kernel_power_off();
>         idle_with_irq_disabled();
>  }
>
> diff --git a/arch/c6x/kernel/process.c b/arch/c6x/kernel/process.c
> index 57d2ea8..edf7e5a 100644
> --- a/arch/c6x/kernel/process.c
> +++ b/arch/c6x/kernel/process.c
> @@ -27,12 +27,6 @@ void (*c6x_halt)(void);
>  extern asmlinkage void ret_from_fork(void);
>  extern asmlinkage void ret_from_kernel_thread(void);
>
> -/*
> - * power off function, if any
> - */
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL(pm_power_off);
> -
>  void arch_cpu_idle(void)
>  {
>         unsigned long tmp;
> @@ -73,8 +67,7 @@ void machine_halt(void)
>
>  void machine_power_off(void)
>  {
> -       if (pm_power_off)
> -               pm_power_off();
> +       do_kernel_power_off();
>         halt_loop();
>  }
>
> diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
> index b78498e..9ebd76b 100644
> --- a/arch/cris/kernel/process.c
> +++ b/arch/cris/kernel/process.c
> @@ -31,9 +31,6 @@
>
>  extern void default_idle(void);
>
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL(pm_power_off);
> -
>  void arch_cpu_idle(void)
>  {
>         default_idle();
> @@ -60,6 +57,7 @@ void machine_halt(void)
>
>  void machine_power_off(void)
>  {
> +       do_kernel_power_off();
>  }
>
>  /*
> diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
> index 5d40aeb77..502dabb 100644
> --- a/arch/frv/kernel/process.c
> +++ b/arch/frv/kernel/process.c
> @@ -42,9 +42,6 @@ asmlinkage void ret_from_kernel_thread(void);
>
>  #include <asm/pgalloc.h>
>
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL(pm_power_off);
> -
>  static void core_sleep_idle(void)
>  {
>  #ifdef LED_DEBUG_SLEEP
> @@ -107,6 +104,8 @@ void machine_power_off(void)
>         gdbstub_exit(0);
>  #endif
>
> +       do_kernel_power_off();
> +
>         for (;;);
>  }
>
> diff --git a/arch/hexagon/kernel/reset.c b/arch/hexagon/kernel/reset.c
> index 76483c1..6f607b6 100644
> --- a/arch/hexagon/kernel/reset.c
> +++ b/arch/hexagon/kernel/reset.c
> @@ -16,11 +16,13 @@
>   * 02110-1301, USA.
>   */
>
> +#include <linux/pm.h>
>  #include <linux/smp.h>
>  #include <asm/hexagon_vm.h>
>
>  void machine_power_off(void)
>  {
> +       do_kernel_power_off();
>         smp_send_stop();
>         __vmstop();
>  }
> @@ -32,6 +34,3 @@ void machine_halt(void)
>  void machine_restart(char *cmd)
>  {
>  }
> -
> -void (*pm_power_off)(void) = NULL;
> -EXPORT_SYMBOL(pm_power_off);
> diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
> index b515149..88121a2 100644
> --- a/arch/ia64/kernel/process.c
> +++ b/arch/ia64/kernel/process.c
> @@ -57,8 +57,6 @@ void (*ia64_mark_idle)(int);
>
>  unsigned long boot_option_idle_override = IDLE_NO_OVERRIDE;
>  EXPORT_SYMBOL(boot_option_idle_override);
> -void (*pm_power_off) (void);
> -EXPORT_SYMBOL(pm_power_off);
>
>  void
>  ia64_do_show_stack (struct unw_frame_info *info, void *arg)
> @@ -675,8 +673,7 @@ machine_halt (void)
>  void
>  machine_power_off (void)
>  {
> -       if (pm_power_off)
> -               pm_power_off();
> +       do_kernel_power_off();
>         machine_halt();
>  }
>
> diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
> index e69221d..65a037e 100644
> --- a/arch/m32r/kernel/process.c
> +++ b/arch/m32r/kernel/process.c
> @@ -23,6 +23,7 @@
>  #include <linux/fs.h>
>  #include <linux/slab.h>
>  #include <linux/module.h>
> +#include <linux/pm.h>
>  #include <linux/ptrace.h>
>  #include <linux/unistd.h>
>  #include <linux/hardirq.h>
> @@ -44,9 +45,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
>         return tsk->thread.lr;
>  }
>
> -void (*pm_power_off)(void) = NULL;
> -EXPORT_SYMBOL(pm_power_off);
> -
>  void machine_restart(char *__unused)
>  {
>  #if defined(CONFIG_PLAT_MAPPI3)
> @@ -67,7 +65,9 @@ void machine_halt(void)
>
>  void machine_power_off(void)
>  {
> -       /* M32R_FIXME */
> +       do_kernel_power_off();
> +       for (;;)
> +               ;
>  }
>
>  void show_regs(struct pt_regs * regs)
> diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
> index afe3d6e..bbc0a63 100644
> --- a/arch/m68k/kernel/process.c
> +++ b/arch/m68k/kernel/process.c
> @@ -78,14 +78,10 @@ void machine_halt(void)
>
>  void machine_power_off(void)
>  {
> -       if (pm_power_off)
> -               pm_power_off();
> +       do_kernel_power_off();
>         for (;;);
>  }
>
> -void (*pm_power_off)(void) = machine_power_off;
> -EXPORT_SYMBOL(pm_power_off);
> -
>  void show_regs(struct pt_regs * regs)
>  {
>         printk("\n");
> diff --git a/arch/metag/kernel/process.c b/arch/metag/kernel/process.c
> index 483dff9..8d95773 100644
> --- a/arch/metag/kernel/process.c
> +++ b/arch/metag/kernel/process.c
> @@ -67,9 +67,6 @@ void arch_cpu_idle_dead(void)
>  }
>  #endif
>
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL(pm_power_off);
> -
>  void (*soc_restart)(char *cmd);
>  void (*soc_halt)(void);
>
> @@ -90,8 +87,7 @@ void machine_halt(void)
>
>  void machine_power_off(void)
>  {
> -       if (pm_power_off)
> -               pm_power_off();
> +       do_kernel_power_off();
>         smp_send_stop();
>         hard_processor_halt(HALT_OK);
>  }
> diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
> index b2dd371..0ebca36 100644
> --- a/arch/microblaze/kernel/process.c
> +++ b/arch/microblaze/kernel/process.c
> @@ -44,9 +44,6 @@ void show_regs(struct pt_regs *regs)
>                                 regs->msr, regs->ear, regs->esr, regs->fsr);
>  }
>
> -void (*pm_power_off)(void) = NULL;
> -EXPORT_SYMBOL(pm_power_off);
> -
>  void flush_thread(void)
>  {
>  }
> diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c
> index fbe58c6..2c6b32c 100644
> --- a/arch/microblaze/kernel/reset.c
> +++ b/arch/microblaze/kernel/reset.c
> @@ -103,6 +103,7 @@ void machine_halt(void)
>  void machine_power_off(void)
>  {
>         pr_notice("Machine power off...\n");
> +       do_kernel_power_off();
>         while (1)
>                 ;
>  }
> diff --git a/arch/mips/kernel/reset.c b/arch/mips/kernel/reset.c
> index 07fc524..09e74d2 100644
> --- a/arch/mips/kernel/reset.c
> +++ b/arch/mips/kernel/reset.c
> @@ -21,9 +21,6 @@
>   */
>  void (*_machine_restart)(char *command);
>  void (*_machine_halt)(void);
> -void (*pm_power_off)(void);
> -
> -EXPORT_SYMBOL(pm_power_off);
>
>  void machine_restart(char *command)
>  {
> @@ -39,6 +36,5 @@ void machine_halt(void)
>
>  void machine_power_off(void)
>  {
> -       if (pm_power_off)
> -               pm_power_off();
> +       do_kernel_power_off();
>  }
> diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
> index 3707da5..c78b2eb 100644
> --- a/arch/mn10300/kernel/process.c
> +++ b/arch/mn10300/kernel/process.c
> @@ -20,6 +20,7 @@
>  #include <linux/user.h>
>  #include <linux/interrupt.h>
>  #include <linux/delay.h>
> +#include <linux/pm.h>
>  #include <linux/reboot.h>
>  #include <linux/percpu.h>
>  #include <linux/err.h>
> @@ -45,12 +46,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
>  }
>
>  /*
> - * power off function, if any
> - */
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL(pm_power_off);
> -
> -/*
>   * On SMP it's slightly faster (but much more power-consuming!)
>   * to poll the ->work.need_resched flag instead of waiting for the
>   * cross-CPU IPI to arrive. Use this option with caution.
> @@ -93,6 +88,7 @@ void machine_power_off(void)
>  #ifdef CONFIG_KERNEL_DEBUGGER
>         gdbstub_exit(0);
>  #endif
> +       do_kernel_power_off();
>  }
>
>  void show_regs(struct pt_regs *regs)
> diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c
> index 386af25..494afd2 100644
> --- a/arch/openrisc/kernel/process.c
> +++ b/arch/openrisc/kernel/process.c
> @@ -25,6 +25,7 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/mm.h>
> +#include <linux/pm.h>
>  #include <linux/stddef.h>
>  #include <linux/unistd.h>
>  #include <linux/ptrace.h>
> @@ -51,7 +52,7 @@
>   */
>  struct thread_info *current_thread_info_set[NR_CPUS] = { &init_thread_info, };
>
> -void machine_restart(void)
> +void machine_restart(char *cmd)
>  {
>         printk(KERN_INFO "*** MACHINE RESTART ***\n");
>         __asm__("l.nop 1");
> @@ -72,11 +73,12 @@ void machine_halt(void)
>  void machine_power_off(void)
>  {
>         printk(KERN_INFO "*** MACHINE POWER OFF ***\n");
> +
> +       do_kernel_power_off();
> +
>         __asm__("l.nop 1");
>  }
>
> -void (*pm_power_off) (void) = machine_power_off;
> -
>  /*
>   * When a process does an "exec", machine state like FPU and debug
>   * registers need to be reset.  This is a hook function for that.
> diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
> index 0bbbf0d..3f5d14a 100644
> --- a/arch/parisc/kernel/process.c
> +++ b/arch/parisc/kernel/process.c
> @@ -41,6 +41,7 @@
>  #include <linux/fs.h>
>  #include <linux/module.h>
>  #include <linux/personality.h>
> +#include <linux/pm.h>
>  #include <linux/ptrace.h>
>  #include <linux/sched.h>
>  #include <linux/slab.h>
> @@ -133,7 +134,9 @@ void machine_power_off(void)
>         pdc_soft_power_button(0);
>
>         pdc_chassis_send_status(PDC_CHASSIS_DIRECT_SHUTDOWN);
> -
> +
> +       do_kernel_power_off();
> +
>         /* It seems we have no way to power the system off via
>          * software. The user has to press the button himself. */
>
> @@ -141,9 +144,6 @@ void machine_power_off(void)
>                "Please power this system off now.");
>  }
>
> -void (*pm_power_off)(void) = machine_power_off;
> -EXPORT_SYMBOL(pm_power_off);
> -
>  /*
>   * Free current thread data structures etc..
>   */
> diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
> index 1362cd6..5b7a851 100644
> --- a/arch/powerpc/kernel/setup-common.c
> +++ b/arch/powerpc/kernel/setup-common.c
> @@ -141,6 +141,9 @@ void machine_power_off(void)
>         machine_shutdown();
>         if (ppc_md.power_off)
>                 ppc_md.power_off();
> +
> +       do_kernel_power_off();
> +
>  #ifdef CONFIG_SMP
>         smp_send_stop();
>  #endif
> @@ -151,9 +154,6 @@ void machine_power_off(void)
>  /* Used by the G5 thermal driver */
>  EXPORT_SYMBOL_GPL(machine_power_off);
>
> -void (*pm_power_off)(void) = machine_power_off;
> -EXPORT_SYMBOL_GPL(pm_power_off);
> -
>  void machine_halt(void)
>  {
>         machine_shutdown();
> diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
> index e80d9ff..267e025 100644
> --- a/arch/s390/kernel/setup.c
> +++ b/arch/s390/kernel/setup.c
> @@ -263,13 +263,9 @@ void machine_power_off(void)
>                  */
>                 console_unblank();
>         _machine_power_off();
> -}
>
> -/*
> - * Dummy power off function.
> - */
> -void (*pm_power_off)(void) = machine_power_off;
> -EXPORT_SYMBOL_GPL(pm_power_off);
> +       do_kernel_power_off();
> +}
>
>  static int __init early_parse_mem(char *p)
>  {
> diff --git a/arch/score/kernel/process.c b/arch/score/kernel/process.c
> index a1519ad3..b76ea67 100644
> --- a/arch/score/kernel/process.c
> +++ b/arch/score/kernel/process.c
> @@ -29,9 +29,6 @@
>  #include <linux/pm.h>
>  #include <linux/rcupdate.h>
>
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL(pm_power_off);
> -
>  /* If or when software machine-restart is implemented, add code here. */
>  void machine_restart(char *command) {}
>
> @@ -39,7 +36,10 @@ void machine_restart(char *command) {}
>  void machine_halt(void) {}
>
>  /* If or when software machine-power-off is implemented, add code here. */
> -void machine_power_off(void) {}
> +void machine_power_off(void)
> +{
> +       do_kernel_power_off();
> +}
>
>  void ret_from_fork(void);
>  void ret_from_kernel_thread(void);
> diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c
> index 04afe5b..065de12 100644
> --- a/arch/sh/kernel/reboot.c
> +++ b/arch/sh/kernel/reboot.c
> @@ -11,9 +11,6 @@
>  #include <asm/tlbflush.h>
>  #include <asm/traps.h>
>
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL(pm_power_off);
> -
>  #ifdef CONFIG_SUPERH32
>  static void watchdog_trigger_immediate(void)
>  {
> @@ -51,8 +48,7 @@ static void native_machine_shutdown(void)
>
>  static void native_machine_power_off(void)
>  {
> -       if (pm_power_off)
> -               pm_power_off();
> +       do_kernel_power_off();
>  }
>
>  static void native_machine_halt(void)
> diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
> index 50e7b62..cb8148a 100644
> --- a/arch/sparc/kernel/process_32.c
> +++ b/arch/sparc/kernel/process_32.c
> @@ -48,14 +48,6 @@
>   */
>  void (*sparc_idle)(void);
>
> -/*
> - * Power-off handler instantiation for pm.h compliance
> - * This is done via auxio, but could be used as a fallback
> - * handler when auxio is not present-- unused for now...
> - */
> -void (*pm_power_off)(void) = machine_power_off;
> -EXPORT_SYMBOL(pm_power_off);
> -
>  /*
>   * sysctl - toggle power-off restriction for serial console
>   * systems in machine_power_off()
> @@ -112,6 +104,8 @@ void machine_power_off(void)
>                 sbus_writeb(power_register, auxio_power_register);
>         }
>
> +       do_kernel_power_off();
> +
>         machine_halt();
>  }
>
> diff --git a/arch/sparc/kernel/reboot.c b/arch/sparc/kernel/reboot.c
> index eba7d91..3c0bb03 100644
> --- a/arch/sparc/kernel/reboot.c
> +++ b/arch/sparc/kernel/reboot.c
> @@ -16,17 +16,13 @@
>   */
>  int scons_pwroff = 1;
>
> -/* This isn't actually used, it exists merely to satisfy the
> - * reference in kernel/sys.c
> - */
> -void (*pm_power_off)(void) = machine_power_off;
> -EXPORT_SYMBOL(pm_power_off);
> -
>  void machine_power_off(void)
>  {
>         if (strcmp(of_console_device->type, "serial") || scons_pwroff)
>                 prom_halt_power_off();
>
> +       do_kernel_power_off();
> +
>         prom_halt();
>  }
>
> diff --git a/arch/tile/kernel/reboot.c b/arch/tile/kernel/reboot.c
> index 6c5d2c0..8ff4a7f 100644
> --- a/arch/tile/kernel/reboot.c
> +++ b/arch/tile/kernel/reboot.c
> @@ -36,6 +36,9 @@ void machine_power_off(void)
>  {
>         arch_local_irq_disable_all();
>         smp_send_stop();
> +
> +       do_kernel_power_off();
> +
>         hv_power_off();
>  }
>
> @@ -45,7 +48,3 @@ void machine_restart(char *cmd)
>         smp_send_stop();
>         hv_restart((HV_VirtAddr) "vmlinux", (HV_VirtAddr) cmd);
>  }
> -
> -/* No interesting distinction to be made here. */
> -void (*pm_power_off)(void) = NULL;
> -EXPORT_SYMBOL(pm_power_off);
> diff --git a/arch/um/kernel/reboot.c b/arch/um/kernel/reboot.c
> index ced8903..a82ef28 100644
> --- a/arch/um/kernel/reboot.c
> +++ b/arch/um/kernel/reboot.c
> @@ -11,8 +11,6 @@
>  #include <os.h>
>  #include <skas.h>
>
> -void (*pm_power_off)(void);
> -
>  static void kill_off_processes(void)
>  {
>         if (proc_mm)
> diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
> index b008e99..9490dd5 100644
> --- a/arch/unicore32/kernel/process.c
> +++ b/arch/unicore32/kernel/process.c
> @@ -56,16 +56,9 @@ void machine_halt(void)
>         gpio_set_value(GPO_SOFT_OFF, 0);
>  }
>
> -/*
> - * Function pointers to optional machine specific functions
> - */
> -void (*pm_power_off)(void) = NULL;
> -EXPORT_SYMBOL(pm_power_off);
> -
>  void machine_power_off(void)
>  {
> -       if (pm_power_off)
> -               pm_power_off();
> +       do_kernel_power_off();
>         machine_halt();
>  }
>
> diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
> index 17962e6..5c09e28 100644
> --- a/arch/x86/kernel/reboot.c
> +++ b/arch/x86/kernel/reboot.c
> @@ -30,12 +30,6 @@
>  #include <asm/x86_init.h>
>  #include <asm/efi.h>
>
> -/*
> - * Power off function, if any
> - */
> -void (*pm_power_off)(void);
> -EXPORT_SYMBOL(pm_power_off);
> -
>  static const struct desc_ptr no_idt = {};
>
>  /*
> @@ -647,11 +641,12 @@ static void native_machine_halt(void)
>
>  static void native_machine_power_off(void)
>  {
> -       if (pm_power_off) {
> +       if (have_kernel_power_off()) {
>                 if (!reboot_force)
>                         machine_shutdown();
> -               pm_power_off();
> +               do_kernel_power_off();
>         }
> +
>         /* A fallback in case there is no PM info available */
>         tboot_shutdown(TB_SHUTDOWN_HALT);
>  }
> diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
> index 1a3f044..c2c1d74 100644
> --- a/arch/x86/xen/enlighten.c
> +++ b/arch/x86/xen/enlighten.c
> @@ -1320,8 +1320,7 @@ static void xen_machine_halt(void)
>
>  static void xen_machine_power_off(void)
>  {
> -       if (pm_power_off)
> -               pm_power_off();
> +       do_kernel_power_off();
>         xen_reboot(SHUTDOWN_poweroff);
>  }
>
> diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
> index 1c85323..c487296 100644
> --- a/arch/xtensa/kernel/process.c
> +++ b/arch/xtensa/kernel/process.c
> @@ -49,10 +49,6 @@ extern void ret_from_kernel_thread(void);
>
>  struct task_struct *current_set[NR_CPUS] = {&init_task, };
>
> -void (*pm_power_off)(void) = NULL;
> -EXPORT_SYMBOL(pm_power_off);
> -
> -
>  #if XTENSA_HAVE_COPROCESSORS
>
>  void coprocessor_release_all(struct thread_info *ti)
> diff --git a/drivers/parisc/power.c b/drivers/parisc/power.c
> index ef31b77..f10cf92 100644
> --- a/drivers/parisc/power.c
> +++ b/drivers/parisc/power.c
> @@ -95,8 +95,7 @@ static void process_shutdown(void)
>                 /* send kill signal */
>                 if (kill_cad_pid(SIGINT, 1)) {
>                         /* just in case killing init process failed */
> -                       if (pm_power_off)
> -                               pm_power_off();
> +                       kernel_power_off();
>                 }
>         }
>  }
> diff --git a/kernel/power/poweroff_handler.c b/kernel/power/poweroff_handler.c
> index aeb4736..37f0b88 100644
> --- a/kernel/power/poweroff_handler.c
> +++ b/kernel/power/poweroff_handler.c
> @@ -22,6 +22,12 @@
>  #include <linux/types.h>
>
>  /*
> + * If set, calling this function will power off the system immediately.
> + */
> +void (*pm_power_off)(void);
> +EXPORT_SYMBOL(pm_power_off);
> +
> +/*
>   *     Notifier list for kernel code which wants to be called
>   *     to power off the system.
>   */
> @@ -236,6 +242,8 @@ EXPORT_SYMBOL(devm_register_power_off_handler);
>  void do_kernel_power_off(void)
>  {
>         spin_lock(&power_off_handler_lock);
> +       if (pm_power_off)
> +               pm_power_off();
>         raw_notifier_call_chain(&power_off_handler_list, 0, NULL);
>         spin_unlock(&power_off_handler_lock);
>  }
> diff --git a/kernel/reboot.c b/kernel/reboot.c
> index 5925f5a..0930851 100644
> --- a/kernel/reboot.c
> +++ b/kernel/reboot.c
> @@ -306,9 +306,9 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
>                 return ret;
>
>         /* Instead of trying to make the power_off code look like
> -        * halt when pm_power_off is not set do it the easy way.
> +        * halt when no poweroff handler exists do it the easy way.
>          */
> -       if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
> +       if (cmd == LINUX_REBOOT_CMD_POWER_OFF && !have_kernel_power_off())
>                 cmd = LINUX_REBOOT_CMD_HALT;
>
>         mutex_lock(&reboot_mutex);
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

[PATCH v2 12/47] mfd: ab8500-sysctrl: Register with kernel poweroff handler

[Guenter Roeck]

Register with kernel poweroff handler instead of setting pm_power_off
directly. Register with low priority to reflect that the original code
only sets pm_power_off if it was not already set.

sysctrl_dev is set prior to poweroff handler registration, and the
poweroff handler is unregistered prior to clearing sysrctrl_dev.
It is therefore not necessary to check if sysctrl_dev is NULL in the
poweroff handler, and the check was removed. Setting sysctrl_dev to NULL
in the remove function was also removed as unnecessary. With those changes,
devm_register_power_off_handler can be used to register the poeroff handler.
The now empty remove function was retained since the ab8500_restart function,
which is currently unused, would likely need some cleanup if it was ever used.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v2:
- Use define to specify poweroff handler priority
- Use devm_register_power_off_handler
- Use dev_warn instead of dev_err
- Since we use devm_register_power_off_handler,
  we need to check if sysctrl_dev in the poweroff handler to avoid
  a race condition on unload, so this check is no longer removed

 drivers/mfd/ab8500-sysctrl.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 8e0dae5..dc634d5 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -6,6 +6,7 @@
 
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/notifier.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/reboot.h>
@@ -23,7 +24,8 @@
 
 static struct device *sysctrl_dev;
 
-static void ab8500_power_off(void)
+static int ab8500_power_off(struct notifier_block *this, unsigned long unused1,
+			    void *unused2)
 {
 	sigset_t old;
 	sigset_t all;
@@ -36,7 +38,7 @@ static void ab8500_power_off(void)
 
 	if (sysctrl_dev == NULL) {
 		pr_err("%s: sysctrl not initialized\n", __func__);
-		return;
+		return NOTIFY_DONE;
 	}
 
 	/*
@@ -83,8 +85,15 @@ shutdown:
 					 AB8500_STW4500CTRL1_SWRESET4500N);
 		(void)sigprocmask(SIG_SETMASK, &old, NULL);
 	}
+
+	return NOTIFY_DONE;
 }
 
+static struct notifier_block ab8500_poweroff_nb = {
+	.notifier_call = ab8500_power_off,
+	.priority = POWEROFF_PRIORITY_LOW,
+};
+
 /*
  * Use the AB WD to reset the platform. It will perform a hard
  * reset instead of a soft reset. Write the reset reason to
@@ -185,6 +194,7 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev)
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 	struct ab8500_platform_data *plat;
 	struct ab8500_sysctrl_platform_data *pdata;
+	int err;
 
 	plat = dev_get_platdata(pdev->dev.parent);
 
@@ -193,8 +203,9 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev)
 
 	sysctrl_dev = &pdev->dev;
 
-	if (!pm_power_off)
-		pm_power_off = ab8500_power_off;
+	err = devm_register_power_off_handler(sysctrl_dev, &ab8500_poweroff_nb);
+	if (err)
+		dev_warn(&pdev->dev, "Failed to register poweroff handler\n");
 
 	pdata = plat->sysctrl;
 	if (pdata) {
@@ -228,9 +239,6 @@ static int ab8500_sysctrl_remove(struct platform_device *pdev)
 {
 	sysctrl_dev = NULL;
 
-	if (pm_power_off == ab8500_power_off)
-		pm_power_off = NULL;
-
 	return 0;
 }
 
-- 
1.9.1

[PATCH v2 12/47] mfd: ab8500-sysctrl: Register with kernel poweroff handler

[Linus Walleij]

On Tue, Oct 21, 2014 at 6:12 AM, Guenter Roeck <linux@roeck-us.net> wrote:

> Register with kernel poweroff handler instead of setting pm_power_off
> directly. Register with low priority to reflect that the original code
> only sets pm_power_off if it was not already set.
>
> sysctrl_dev is set prior to poweroff handler registration, and the
> poweroff handler is unregistered prior to clearing sysrctrl_dev.
> It is therefore not necessary to check if sysctrl_dev is NULL in the
> poweroff handler, and the check was removed. Setting sysctrl_dev to NULL
> in the remove function was also removed as unnecessary. With those changes,
> devm_register_power_off_handler can be used to register the poeroff handler.
> The now empty remove function was retained since the ab8500_restart function,
> which is currently unused, would likely need some cleanup if it was ever used.
>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Lee Jones <lee.jones@linaro.org>
> Cc: Samuel Ortiz <sameo@linux.intel.com>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> ---
> v2:
> - Use define to specify poweroff handler priority
> - Use devm_register_power_off_handler
> - Use dev_warn instead of dev_err
> - Since we use devm_register_power_off_handler,
>   we need to check if sysctrl_dev in the poweroff handler to avoid
>   a race condition on unload, so this check is no longer removed

I can't compile this, I guess because of a dependency on some
other patch?

  CC      drivers/mfd/ab8500-sysctrl.o
../drivers/mfd/ab8500-sysctrl.c:94:14: error: ?POWEROFF_PRIORITY_LOW?
undeclared here (not in a function)
  .priority = POWEROFF_PRIORITY_LOW,
              ^
../drivers/mfd/ab8500-sysctrl.c: In function ?ab8500_sysctrl_probe?:
../drivers/mfd/ab8500-sysctrl.c:206:2: error: implicit declaration of
function ?devm_register_power_off_handler?
[-Werror=implicit-function-declaration]
  err = devm_register_power_off_handler(sysctrl_dev, &ab8500_poweroff_nb);

I wanted to provide a Tested-by but I guess I can only give this:
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH v2 12/47] mfd: ab8500-sysctrl: Register with kernel poweroff handler

[Guenter Roeck]

On Mon, Oct 27, 2014 at 04:59:00PM +0100, Linus Walleij wrote:
> On Tue, Oct 21, 2014 at 6:12 AM, Guenter Roeck <linux@roeck-us.net> wrote:
> 
> > Register with kernel poweroff handler instead of setting pm_power_off
> > directly. Register with low priority to reflect that the original code
> > only sets pm_power_off if it was not already set.
> >
> > sysctrl_dev is set prior to poweroff handler registration, and the
> > poweroff handler is unregistered prior to clearing sysrctrl_dev.
> > It is therefore not necessary to check if sysctrl_dev is NULL in the
> > poweroff handler, and the check was removed. Setting sysctrl_dev to NULL
> > in the remove function was also removed as unnecessary. With those changes,
> > devm_register_power_off_handler can be used to register the poeroff handler.
> > The now empty remove function was retained since the ab8500_restart function,
> > which is currently unused, would likely need some cleanup if it was ever used.
> >
> > Cc: Linus Walleij <linus.walleij@linaro.org>
> > Cc: Lee Jones <lee.jones@linaro.org>
> > Cc: Samuel Ortiz <sameo@linux.intel.com>
> > Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> > ---
> > v2:
> > - Use define to specify poweroff handler priority
> > - Use devm_register_power_off_handler
> > - Use dev_warn instead of dev_err
> > - Since we use devm_register_power_off_handler,
> >   we need to check if sysctrl_dev in the poweroff handler to avoid
> >   a race condition on unload, so this check is no longer removed
> 
> I can't compile this, I guess because of a dependency on some
> other patch?
> 
Hi Linus,

can you try v3 ? It has a number of improvements, and POWEROFF_PRIORITY_LOW
was replaced with POWER_OFF_PRIORITY_LOW. You will need patch 01/47 of the
series as well to get the definition.

>   CC      drivers/mfd/ab8500-sysctrl.o
> ../drivers/mfd/ab8500-sysctrl.c:94:14: error: ?POWEROFF_PRIORITY_LOW?
> undeclared here (not in a function)
>   .priority = POWEROFF_PRIORITY_LOW,
>               ^
> ../drivers/mfd/ab8500-sysctrl.c: In function ?ab8500_sysctrl_probe?:
> ../drivers/mfd/ab8500-sysctrl.c:206:2: error: implicit declaration of
> function ?devm_register_power_off_handler?
> [-Werror=implicit-function-declaration]
>   err = devm_register_power_off_handler(sysctrl_dev, &ab8500_poweroff_nb);
> 
> I wanted to provide a Tested-by but I guess I can only give this:
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> 
Thanks!
Guenter

[PATCH v2 35/47] arm: Register with kernel poweroff handler

[Guenter Roeck]

Register with kernel poweroff handler instead of setting pm_power_off
directly. Always use register_power_off_handler_simple as there is no
indication that more than one poweroff handler is registered.

If the poweroff handler only resets the system or puts the CPU in sleep mode,
select the fallback priority to indicate that the poweroff handler is one
of last resort. If the poweroff handler powers off the system, select the
default priority.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
- Use defines to specify poweroff handler priorities
- Drop changes in arch/arm/mach-at91/setup.c (file removed upstream)

 arch/arm/kernel/psci.c                         | 3 ++-
 arch/arm/mach-at91/board-gsia18s.c             | 3 ++-
 arch/arm/mach-bcm/board_bcm2835.c              | 3 ++-
 arch/arm/mach-cns3xxx/cns3420vb.c              | 3 ++-
 arch/arm/mach-cns3xxx/core.c                   | 3 ++-
 arch/arm/mach-highbank/highbank.c              | 3 ++-
 arch/arm/mach-imx/mach-mx31moboard.c           | 3 ++-
 arch/arm/mach-iop32x/em7210.c                  | 3 ++-
 arch/arm/mach-iop32x/glantank.c                | 3 ++-
 arch/arm/mach-iop32x/iq31244.c                 | 3 ++-
 arch/arm/mach-iop32x/n2100.c                   | 3 ++-
 arch/arm/mach-ixp4xx/dsmg600-setup.c           | 3 ++-
 arch/arm/mach-ixp4xx/nas100d-setup.c           | 3 ++-
 arch/arm/mach-ixp4xx/nslu2-setup.c             | 3 ++-
 arch/arm/mach-omap2/board-omap3touchbook.c     | 3 ++-
 arch/arm/mach-orion5x/board-mss2.c             | 3 ++-
 arch/arm/mach-orion5x/dns323-setup.c           | 9 ++++++---
 arch/arm/mach-orion5x/kurobox_pro-setup.c      | 3 ++-
 arch/arm/mach-orion5x/ls-chl-setup.c           | 3 ++-
 arch/arm/mach-orion5x/ls_hgl-setup.c           | 3 ++-
 arch/arm/mach-orion5x/lsmini-setup.c           | 3 ++-
 arch/arm/mach-orion5x/mv2120-setup.c           | 3 ++-
 arch/arm/mach-orion5x/net2big-setup.c          | 3 ++-
 arch/arm/mach-orion5x/terastation_pro2-setup.c | 3 ++-
 arch/arm/mach-orion5x/ts209-setup.c            | 3 ++-
 arch/arm/mach-orion5x/ts409-setup.c            | 3 ++-
 arch/arm/mach-pxa/corgi.c                      | 3 ++-
 arch/arm/mach-pxa/mioa701.c                    | 3 ++-
 arch/arm/mach-pxa/poodle.c                     | 3 ++-
 arch/arm/mach-pxa/spitz.c                      | 3 ++-
 arch/arm/mach-pxa/tosa.c                       | 3 ++-
 arch/arm/mach-pxa/viper.c                      | 3 ++-
 arch/arm/mach-pxa/z2.c                         | 7 ++++---
 arch/arm/mach-pxa/zeus.c                       | 7 ++++---
 arch/arm/mach-s3c24xx/mach-gta02.c             | 3 ++-
 arch/arm/mach-s3c24xx/mach-jive.c              | 3 ++-
 arch/arm/mach-s3c24xx/mach-vr1000.c            | 3 ++-
 arch/arm/mach-s3c64xx/mach-smartq.c            | 3 ++-
 arch/arm/mach-sa1100/generic.c                 | 3 ++-
 arch/arm/mach-sa1100/simpad.c                  | 3 ++-
 arch/arm/mach-u300/regulator.c                 | 3 ++-
 arch/arm/mach-vt8500/vt8500.c                  | 3 ++-
 arch/arm/xen/enlighten.c                       | 3 ++-
 43 files changed, 94 insertions(+), 49 deletions(-)

diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c
index f73891b..4917c99 100644
--- a/arch/arm/kernel/psci.c
+++ b/arch/arm/kernel/psci.c
@@ -264,7 +264,8 @@ static int psci_0_2_init(struct device_node *np)
 
 	arm_pm_restart = psci_sys_reset;
 
-	pm_power_off = psci_sys_poweroff;
+	register_power_off_handler_simple(psci_sys_poweroff,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 out_put_node:
 	of_node_put(np);
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index bf5cc55..cb5d1c3 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -521,7 +521,8 @@ static void gsia18s_power_off(void)
 
 static int __init gsia18s_power_off_init(void)
 {
-	pm_power_off = gsia18s_power_off;
+	register_power_off_handler_simple(gsia18s_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 	return 0;
 }
 
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 70f2f39..307ebc1 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -111,7 +111,8 @@ static void __init bcm2835_init(void)
 
 	bcm2835_setup_restart();
 	if (wdt_regs)
-		pm_power_off = bcm2835_power_off;
+		register_power_off_handler_simple(bcm2835_power_off,
+						  POWEROFF_PRIORITY_FALLBACK);
 
 	bcm2835_init_clocks();
 
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 6428bcc7..3f48979 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -224,7 +224,8 @@ static void __init cns3420_init(void)
 	cns3xxx_ahci_init();
 	cns3xxx_sdhci_init();
 
-	pm_power_off = cns3xxx_power_off;
+	register_power_off_handler_simple(cns3xxx_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 }
 
 static struct map_desc cns3420_io_desc[] __initdata = {
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 4e9837d..fc0b9e0 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -386,7 +386,8 @@ static void __init cns3xxx_init(void)
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
 	}
 
-	pm_power_off = cns3xxx_power_off;
+	register_power_off_handler_simple(cns3xxx_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	of_platform_populate(NULL, of_default_bus_match_table,
                         cns3xxx_auxdata, NULL);
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 8c35ae4..87958f9a 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -155,7 +155,8 @@ static void __init highbank_init(void)
 	sregs_base = of_iomap(np, 0);
 	WARN_ON(!sregs_base);
 
-	pm_power_off = highbank_power_off;
+	register_power_off_handler_simple(highbank_power_off,
+					  POWEROFF_PRIORITY_FALLBACK);
 	highbank_pm_init();
 
 	bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index bb6f8a5..736937b 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -559,7 +559,8 @@ static void __init mx31moboard_init(void)
 
 	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 
-	pm_power_off = mx31moboard_poweroff;
+	register_power_off_handler_simple(mx31moboard_poweroff,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 77e1ff0..8f93266 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -201,7 +201,8 @@ static int __init em7210_request_gpios(void)
 		return 0;
 	}
 
-	pm_power_off = em7210_power_off;
+	register_power_off_handler_simple(em7210_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 547b234..8d12aa1 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -199,7 +199,8 @@ static void __init glantank_init_machine(void)
 	i2c_register_board_info(0, glantank_i2c_devices,
 		ARRAY_SIZE(glantank_i2c_devices));
 
-	pm_power_off = glantank_power_off;
+	register_power_off_handler_simple(glantank_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(GLANTANK, "GLAN Tank")
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 0e1392b..7c09bbe 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -293,7 +293,8 @@ static void __init iq31244_init_machine(void)
 	platform_device_register(&iop3xx_dma_1_channel);
 
 	if (is_ep80219())
-		pm_power_off = ep80219_power_off;
+		register_power_off_handler_simple(ep80219_power_off,
+						  POWEROFF_PRIORITY_DEFAULT);
 
 	if (!is_80219())
 		platform_device_register(&iop3xx_aau_channel);
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index c1cd80e..ee949c5 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -356,7 +356,8 @@ static void __init n2100_init_machine(void)
 	i2c_register_board_info(0, n2100_i2c_devices,
 		ARRAY_SIZE(n2100_i2c_devices));
 
-	pm_power_off = n2100_power_off;
+	register_power_off_handler_simple(n2100_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(N2100, "Thecus N2100")
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 43ee06d..ae3dafa 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -281,7 +281,8 @@ static void __init dsmg600_init(void)
 
 	platform_add_devices(dsmg600_devices, ARRAY_SIZE(dsmg600_devices));
 
-	pm_power_off = dsmg600_power_off;
+	register_power_off_handler_simple(dsmg600_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 4e0f762..a8062db 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -292,7 +292,8 @@ static void __init nas100d_init(void)
 
 	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));
 
-	pm_power_off = nas100d_power_off;
+	register_power_off_handler_simple(nas100d_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	if (request_irq(gpio_to_irq(NAS100D_RB_GPIO), &nas100d_reset_handler,
 		IRQF_TRIGGER_LOW, "NAS100D reset button", NULL) < 0) {
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 88c025f..a95f727 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -262,7 +262,8 @@ static void __init nslu2_init(void)
 
 	platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
 
-	pm_power_off = nslu2_power_off;
+	register_power_off_handler_simple(nslu2_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	if (request_irq(gpio_to_irq(NSLU2_RB_GPIO), &nslu2_reset_handler,
 		IRQF_TRIGGER_LOW, "NSLU2 reset button", NULL) < 0) {
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index a01993e..22347b8 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -344,7 +344,8 @@ static void __init omap3_touchbook_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
-	pm_power_off = omap3_touchbook_poweroff;
+	register_power_off_handler_simple(omap3_touchbook_poweroff,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
 		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
index 66f9c3b..7b46868 100644
--- a/arch/arm/mach-orion5x/board-mss2.c
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -86,5 +86,6 @@ static void mss2_power_off(void)
 void __init mss2_init(void)
 {
 	/* register mss2 specific power-off method */
-	pm_power_off = mss2_power_off;
+	register_power_off_handler_simple(mss2_power_off,
+					  POWEROFF_PRIORITY_FALLBACK);
 }
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 09d2a26..979c696 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -669,7 +669,8 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323a_power_off;
+		register_power_off_handler_simple(dns323a_power_off,
+						  POWEROFF_PRIORITY_DEFAULT);
 		break;
 	case DNS323_REV_B1:
 		/* 5182 built-in SATA init */
@@ -686,7 +687,8 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323b_power_off;
+		register_power_off_handler_simple(dns323b_power_off,
+						  POWEROFF_PRIORITY_DEFAULT);
 		break;
 	case DNS323_REV_C1:
 		/* 5182 built-in SATA init */
@@ -696,7 +698,8 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323c_power_off;
+		register_power_off_handler_simple(dns323c_power_off,
+						  POWEROFF_PRIORITY_DEFAULT);
 
 		/* Now, -this- should theorically be done by the sata_mv driver
 		 * once I figure out what's going on there. Maybe the behaviour
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index fe6a48a..1004d2ad 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -376,7 +376,8 @@ static void __init kurobox_pro_init(void)
 	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
 
 	/* register Kurobox Pro specific power-off method */
-	pm_power_off = kurobox_pro_power_off;
+	register_power_off_handler_simple(kurobox_pro_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 }
 
 #ifdef CONFIG_MACH_KUROBOX_PRO
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 028ea03..b1e161a 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -312,7 +312,8 @@ static void __init lschl_init(void)
 	gpio_set_value(LSCHL_GPIO_USB_POWER, 1);
 
 	/* register power-off method */
-	pm_power_off = lschl_power_off;
+	register_power_off_handler_simple(lschl_power_off,
+					  POWEROFF_PRIORITY_FALLBACK);
 
 	pr_info("%s: finished\n", __func__);
 }
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 32b7129..c77e5a0 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -259,7 +259,8 @@ static void __init ls_hgl_init(void)
 	gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
 
 	/* register power-off method */
-	pm_power_off = ls_hgl_power_off;
+	register_power_off_handler_simple(ls_hgl_power_off,
+					  POWEROFF_PRIORITY_FALLBACK);
 
 	pr_info("%s: finished\n", __func__);
 }
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index a6493e7..9235353 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -260,7 +260,8 @@ static void __init lsmini_init(void)
 	gpio_set_value(LSMINI_GPIO_USB_POWER, 1);
 
 	/* register power-off method */
-	pm_power_off = lsmini_power_off;
+	register_power_off_handler_simple(lsmini_power_off,
+					  POWEROFF_PRIORITY_FALLBACK);
 
 	pr_info("%s: finished\n", __func__);
 }
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index e032f01..897f1f6 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -225,7 +225,8 @@ static void __init mv2120_init(void)
 	if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
 		pr_err("mv2120: failed to setup power-off GPIO\n");
-	pm_power_off = mv2120_power_off;
+	register_power_off_handler_simple(mv2120_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 }
 
 /* Warning: HP uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index ba73dc7..f783ad7 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -413,7 +413,8 @@ static void __init net2big_init(void)
 
 	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
 	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = net2big_power_off;
+		register_power_off_handler_simple(net2big_power_off,
+						  POWEROFF_PRIORITY_DEFAULT);
 	else
 		pr_err("net2big: failed to configure power-off GPIO\n");
 
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 1208674..4c16209 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -353,7 +353,8 @@ static void __init tsp2_init(void)
 	i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
 
 	/* register Terastation Pro II specific power-off method */
-	pm_power_off = tsp2_power_off;
+	register_power_off_handler_simple(tsp2_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index c725b7c..7b46830 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -318,7 +318,8 @@ static void __init qnap_ts209_init(void)
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
 	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
+	register_power_off_handler_simple(qnap_tsx09_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index cf2ab53..d36949a 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -307,7 +307,8 @@ static void __init qnap_ts409_init(void)
 	platform_device_register(&ts409_leds);
 
 	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
+	register_power_off_handler_simple(qnap_tsx09_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 }
 
 MACHINE_START(TS409, "QNAP TS-409")
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 06022b2..82ef5ad 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -718,7 +718,8 @@ static void corgi_restart(enum reboot_mode mode, const char *cmd)
 
 static void __init corgi_init(void)
 {
-	pm_power_off = corgi_poweroff;
+	register_power_off_handler_simple(corgi_poweroff,
+					  POWEROFF_PRIORITY_FALLBACK);
 
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR |= PCFR_OPDE;
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 29997bd..7a29258 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -750,7 +750,8 @@ static void __init mioa701_machine_init(void)
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	pxa_set_udc_info(&mioa701_udc_info);
 	pxa_set_ac97_info(&mioa701_ac97_info);
-	pm_power_off = mioa701_poweroff;
+	register_power_off_handler_simple(mioa701_poweroff,
+					  POWEROFF_PRIORITY_FALLBACK);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 1319916..867b255 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -432,7 +432,8 @@ static void __init poodle_init(void)
 {
 	int ret = 0;
 
-	pm_power_off = poodle_poweroff;
+	register_power_off_handler_simple(poodle_poweroff,
+					  POWEROFF_PRIORITY_FALLBACK);
 
 	PCFR |= PCFR_OPDE;
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 840c3a4..269b74b 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -944,7 +944,8 @@ static void spitz_restart(enum reboot_mode mode, const char *cmd)
 static void __init spitz_init(void)
 {
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
-	pm_power_off = spitz_poweroff;
+	register_power_off_handler_simple(spitz_poweroff,
+					  POWEROFF_PRIORITY_FALLBACK);
 
 	PMCR = 0x00;
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c158a6e..8f7fd80 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -940,7 +940,8 @@ static void __init tosa_init(void)
 
 	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
 
-	pm_power_off = tosa_poweroff;
+	register_power_off_handler_simple(tosa_poweroff,
+					  POWEROFF_PRIORITY_FALLBACK);
 
 	PCFR |= PCFR_OPDE;
 
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index de3b080..8f8427c 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -919,7 +919,8 @@ static void __init viper_init(void)
 {
 	u8 version;
 
-	pm_power_off = viper_power_off;
+	register_power_off_handler_simple(viper_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
 
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index e1a121b..cefd1bf 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -693,8 +693,6 @@ static void z2_power_off(void)
 	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
 	pxa27x_cpu_pm_enter(PM_SUSPEND_MEM);
 }
-#else
-#define z2_power_off   NULL
 #endif
 
 /******************************************************************************
@@ -719,7 +717,10 @@ static void __init z2_init(void)
 	z2_keys_init();
 	z2_pmic_init();
 
-	pm_power_off = z2_power_off;
+#ifdef CONFIG_PM
+	register_power_off_handler_simple(z2_power_off,
+					  POWEROFF_PRIORITY_FALLBACK);
+#endif
 }
 
 MACHINE_START(ZIPIT2, "Zipit Z2")
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 205f9bf..651d7b9 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -690,8 +690,6 @@ static void zeus_power_off(void)
 	local_irq_disable();
 	cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
 }
-#else
-#define zeus_power_off   NULL
 #endif
 
 #ifdef CONFIG_APM_EMULATION
@@ -847,7 +845,10 @@ static void __init zeus_init(void)
 	__raw_writel(msc0, MSC0);
 	__raw_writel(msc1, MSC1);
 
-	pm_power_off = zeus_power_off;
+#ifdef CONFIG_PM
+	register_power_off_handler_simple(zeus_power_off,
+					  POWEROFF_PRIORITY_FALLBACK);
+#endif
 	zeus_setup_apm();
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 6d1e0b9..d3659ee 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -579,7 +579,8 @@ static void __init gta02_machine_init(void)
 	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
 
 	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
-	pm_power_off = gta02_poweroff;
+	register_power_off_handler_simple(gta02_poweroff,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	regulator_has_full_constraints();
 }
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 7d99fe8..1890fc2 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -657,7 +657,8 @@ static void __init jive_machine_init(void)
 	s3c_i2c0_set_platdata(&jive_i2c_cfg);
 	i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs));
 
-	pm_power_off = jive_power_off;
+	register_power_off_handler_simple(jive_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices));
 }
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 89f32bd..8b19864 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -306,7 +306,8 @@ static void vr1000_power_off(void)
 
 static void __init vr1000_map_io(void)
 {
-	pm_power_off = vr1000_power_off;
+	register_power_off_handler_simple(vr1000_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index b3d1353..7e62e62 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -291,7 +291,8 @@ static int __init smartq_power_off_init(void)
 	/* leave power on */
 	gpio_direction_output(S3C64XX_GPK(15), 0);
 
-	pm_power_off = smartq_power_off;
+	register_power_off_handler_simple(smartq_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	return ret;
 }
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index d4ea142..23a33d1 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -311,7 +311,8 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 
 static int __init sa1100_init(void)
 {
-	pm_power_off = sa1100_power_off;
+	register_power_off_handler_simple(sa1100_power_off,
+					  POWEROFF_PRIORITY_FALLBACK);
 	return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
 }
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 41e476e..4db57cf 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -373,7 +373,8 @@ static int __init simpad_init(void)
 	if (ret)
 		printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device");
 
-	pm_power_off = simpad_power_off;
+	register_power_off_handler_simple(simpad_power_off,
+					  POWEROFF_PRIORITY_FALLBACK);
 
 	sa11x0_ppc_configure_mcp();
 	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
index 0493a84..f8c0fe2 100644
--- a/arch/arm/mach-u300/regulator.c
+++ b/arch/arm/mach-u300/regulator.c
@@ -98,7 +98,8 @@ static int __init __u300_init_boardpower(struct platform_device *pdev)
 			   U300_SYSCON_PMCR_DCON_ENABLE, 0);
 
 	/* Register globally exported PM poweroff hook */
-	pm_power_off = u300_pm_poweroff;
+	register_power_off_handler_simple(u300_pm_poweroff,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 3bc0dc9..f5b9936 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -155,7 +155,8 @@ static void __init vt8500_init(void)
 			pr_err("%s:ioremap(power_off) failed\n", __func__);
 	}
 	if (pmc_base)
-		pm_power_off = &vt8500_power_off;
+		register_power_off_handler_simple(vt8500_power_off,
+						  POWEROFF_PRIORITY_FALLBACK);
 	else
 		pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__);
 
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 0e15f01..46bd95b 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -336,7 +336,8 @@ static int __init xen_pm_init(void)
 	if (!xen_domain())
 		return -ENODEV;
 
-	pm_power_off = xen_power_off;
+	register_power_off_handler_simple(xen_power_off,
+					  POWEROFF_PRIORITY_DEFAULT);
 	arm_pm_restart = xen_restart;
 
 	return 0;
-- 
1.9.1

[PATCH v2 36/47] arm64: psci: Register with kernel poweroff handler

[Guenter Roeck]

Register with kernel poweroff handler instead of setting pm_power_off
directly.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
- Use define to specify poweroff handler priority

 arch/arm64/kernel/psci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index 866c1c8..150ac1c 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -359,7 +359,8 @@ static int __init psci_0_2_init(struct device_node *np)
 
 	arm_pm_restart = psci_sys_reset;
 
-	pm_power_off = psci_sys_poweroff;
+	register_power_off_handler_simple(psci_sys_poweroff,
+					  POWEROFF_PRIORITY_DEFAULT);
 
 out_put_node:
 	of_node_put(np);
-- 
1.9.1

[PATCH v2 36/47] arm64: psci: Register with kernel poweroff handler

[Catalin Marinas]

On Tue, Oct 21, 2014 at 05:12:52AM +0100, Guenter Roeck wrote:
> Register with kernel poweroff handler instead of setting pm_power_off
> directly.
> 
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Acked-by: Catalin Marinas <catalin.marinas@arm.com>

[PATCH v2 36/47] arm64: psci: Register with kernel poweroff handler

[Guenter Roeck]

On Wed, Oct 22, 2014 at 12:23:03PM +0100, Catalin Marinas wrote:
> On Tue, Oct 21, 2014 at 05:12:52AM +0100, Guenter Roeck wrote:
> > Register with kernel poweroff handler instead of setting pm_power_off
> > directly.
> > 
> > Cc: Catalin Marinas <catalin.marinas@arm.com>
> > Cc: Will Deacon <will.deacon@arm.com>
> > Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> 
> Acked-by: Catalin Marinas <catalin.marinas@arm.com>

Thanks!

Guenter

[PATCH v2 36/47] arm64: psci: Register with kernel poweroff handler

[Mark Rutland]

On Tue, Oct 21, 2014 at 05:12:52AM +0100, Guenter Roeck wrote:
> Register with kernel poweroff handler instead of setting pm_power_off
> directly.
> 
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

My Juno board powers down correctly with this applied, so:

Tested-by: Mark Rutland <mark.rutland@arm.com>

Thanks,
Mark.

> ---
> - Use define to specify poweroff handler priority
> 
>  arch/arm64/kernel/psci.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
> index 866c1c8..150ac1c 100644
> --- a/arch/arm64/kernel/psci.c
> +++ b/arch/arm64/kernel/psci.c
> @@ -359,7 +359,8 @@ static int __init psci_0_2_init(struct device_node *np)
>  
>  	arm_pm_restart = psci_sys_reset;
>  
> -	pm_power_off = psci_sys_poweroff;
> +	register_power_off_handler_simple(psci_sys_poweroff,
> +					  POWEROFF_PRIORITY_DEFAULT);
>  
>  out_put_node:
>  	of_node_put(np);
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

[PATCH v2 36/47] arm64: psci: Register with kernel poweroff handler

[Guenter Roeck]

On Wed, Oct 22, 2014 at 01:52:31PM +0100, Mark Rutland wrote:
> On Tue, Oct 21, 2014 at 05:12:52AM +0100, Guenter Roeck wrote:
> > Register with kernel poweroff handler instead of setting pm_power_off
> > directly.
> > 
> > Cc: Catalin Marinas <catalin.marinas@arm.com>
> > Cc: Will Deacon <will.deacon@arm.com>
> > Signed-off-by: Guenter Roeck <linux@roeck-us.net>
> 
> My Juno board powers down correctly with this applied, so:
> 
> Tested-by: Mark Rutland <mark.rutland@arm.com>
> 
Thanks a lot!

Guenter