From mboxrd@z Thu Jan 1 00:00:00 1970 From: andrew@lunn.ch (Andrew Lunn) Date: Fri, 24 Oct 2014 23:22:07 +0200 Subject: [PATCHv0 2/2] arm: mvebu: clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file In-Reply-To: <4af680f9a68281755e31df2491f0590046138230.1414185031.git.arno@natisbad.org> References: <4af680f9a68281755e31df2491f0590046138230.1414185031.git.arno@natisbad.org> Message-ID: <20141024212207.GC6436@lunn.ch> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Oct 24, 2014 at 11:22:16PM +0200, Arnaud Ebalard wrote: > > On NETGEAR ReadyNAS 102, the two disks are connected to the external > Marvell 88SE9170 SATA Controller connected to the PCIe bus. The rear > eSATA port is connected to the native Armada 370 SATA controller. > > This patch updates the comments in .dts file wrt SATA interfaces and > reduces the number of ports for native Armada 370 interface from 1 > to 2. Typ0. Jason, can you swap the 1 and 2 around when you commit? Save having a v2. Otherwise Acked-by: Andrew Lunn Andrew > > Signed-off-by: Arnaud Ebalard > --- > arch/arm/boot/dts/armada-370-netgear-rn102.dts | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts > index f79579bdf8fe..1e38628f4060 100644 > --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts > +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts > @@ -35,7 +35,7 @@ > pcie-controller { > status = "okay"; > > - /* Connected to Marvell SATA controller */ > + /* Connected to Marvell 88SE9170 SATA controller */ > pcie at 1,0 { > /* Port 0, Lane 0 */ > status = "okay"; > @@ -53,8 +53,9 @@ > status = "okay"; > }; > > + /* eSATA interface */ > sata at a0000 { > - nr-ports = <2>; > + nr-ports = <1>; > status = "okay"; > }; > > -- > 2.1.1 >