From mboxrd@z Thu Jan 1 00:00:00 1970 From: pali.rohar@gmail.com (Pali =?utf-8?q?Roh=C3=A1r?=) Date: Sun, 26 Oct 2014 23:23:17 +0100 Subject: USB Ethernet gadget on Nokia n900 In-Reply-To: <20141026215548.GA9004@amd> References: <20141019090107.GA19132@amd> <201410262222.39892@pali> <20141026215548.GA9004@amd> Message-ID: <201410262323.17891@pali> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sunday 26 October 2014 22:55:48 Pavel Machek wrote: > > > I have root prepared on /dev/mmcblk0p6. I tried 3.17 with > > > rx51_defconfig, but no, it refuses to mount it. > > > > > > VFS: Cannot open root device "mmcblk0p6" or ....: error > > > -19. > > > > > > And then it proceeds to list mmcblk0p6 as one of available > > > options > > > > > > :-(. > > > > > > Ideas welcome. > > > > Try to add rootdelay=30 or rootwait to kernel cmdline. > > I had rootdelay=3. Will try rootwait... no change. This is > v3.17 with rx51_defconfig. CONFIG_MACH_NOKIA_RX51=y => device > tree will not be used AFAICT. > > Now I'm back at 3.14 without device tree; same setup works > there. I tried disabling RX51 support in 3.14 (to make it > boot using device tree) but that did not work. > Pavel I remember that there was some problem with initializing mmc device. Sometimes something failed and reading from eMMC was not possible. Try to boot kernel from uboot. Maybe it can help. -- Pali Roh?r pali.rohar at gmail.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part. URL: