From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller"
Date: Mon, 27 Oct 2014 12:08:06 -0500 [thread overview]
Message-ID: <20141027170806.GL14253@saruman> (raw)
In-Reply-To: <108805117.sS9iL5zouT@diego>
On Mon, Oct 27, 2014 at 06:05:35PM +0100, Heiko St?bner wrote:
> Am Montag, 27. Oktober 2014, 11:47:41 schrieb Felipe Balbi:
> > On Mon, Oct 27, 2014 at 05:41:03PM +0100, Johan Hovold wrote:
> > > On Mon, Oct 27, 2014 at 11:38:40AM -0500, Felipe Balbi wrote:
> > > > On Mon, Oct 27, 2014 at 04:26:46PM +0000, Romain Perier wrote:
> > > > > As discussed on the mailing list, it makes more sense to rename this
> > > > > property to "system-power-controller". Problem being that the word
> > > > > "source" usually tends to be used for inputs and that is out of
> > > > > control of the OS. The poweroff capability is an output which simply
> > > > > turns the system-power off. Also, this property might be used by
> > > > > drivers which power-off the system and power back on subsequent RTC
> > > > > alarms. This seems to suggest to remove "poweroff" from the property
> > > > > name and to choose "system-power-controller" as the more generic
> > > > > name. This patchs adds the required renaming changes and defines an
> > > > > helper function which is compatible with both properties, the old one
> > > > > prefixed by a vendor name and the new one without any prefix.
> > > >
> > > > I think you still need to support poweroff-source since it has been
> > > > released on a stable kernel. Perhaps add a warning message telling users
> > > > it's deprecated and asking them to switch over to
> > > > system-power-controller ? Still, simply removing it isn't very nice.
> > >
> > > No, Romain sent a patch that replaced "<vendor>,system-power-controller"
> > > with "poweroff-source". It's now in Mark's tree (for v3.19), and this
> > > series "reverts" to the old name minus the vendor-prefix.
> >
> > oh, so poweroff-source isn't in Linus' tree yet ? (/me goes grep)
> >
> > Then it should be fine. My bad.
> >
> > Many of the other comments are still valid because even though
> > poweroff-source isn't in mainline yet, this series still creates
> > bisection points which are broken. The best solution would be to drop
> > all those patches from Mark's tree. Read, not revert, drop.
>
> There have never been any users of the poweroff-source. The act8846 in the
> radxarock would have been the first, but I held off with the dts patch as the
> naming issue came up at the same time.
>
> So I guess if Romain keeps the renaming together there shouldn't be any other
> bad bisection points?
Not build breaks, but there will always be the commit below:
commit a88f5c6deb2a44f694b01aac48231ec97059b26a
Author: Romain Perier <romain.perier@gmail.com>
Date: Tue Oct 14 06:31:12 2014 +0000
dt-bindings: Document the standard property "poweroff-source"
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/Documentation/devicetree/bindings/power/poweroff.txt b/Documentation/devicetree/bindings/power/poweroff.txt
new file mode 100644
index 0000000..845868b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/poweroff.txt
@@ -0,0 +1,18 @@
+* Generic Poweroff capability
+
+Power-management integrated circuits or miscellaneous harware components are
+sometimes able to control the system power. The device driver associated to these
+components might needs to define poweroff capability, which tells to the kernel
+how to switch off the system. The corresponding driver must have the standard
+property "poweroff-source" in its device node. This property marks the device as
+able to shutdown the system. In order to test if this property is found
+programmatically, use the helper function "of_system_has_poweroff_source" from
+of.h .
+
+Example:
+
+act8846: act8846 at 5 {
+ compatible = "active-semi,act8846";
+ status = "okay";
+ poweroff-source;
+}
Even if for a small time frame, there will always be a commit where we
called "poweroff-source" a standard binding and, as such, as should
support it.
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141027/b90740a2/attachment.sig>
next prev parent reply other threads:[~2014-10-27 17:08 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-27 16:26 [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller" Romain Perier
2014-10-27 16:26 ` [PATCH v1 02/10] dt-bindings: Document the standard property "system-power-controller" Romain Perier
2014-10-27 16:39 ` Felipe Balbi
2014-10-27 17:26 ` Mark Brown
2014-10-27 17:30 ` Felipe Balbi
2014-10-27 17:57 ` Mark Brown
2014-10-28 7:25 ` Romain Perier
2014-10-27 16:26 ` [PATCH v1 03/10] regulator: act8865: Use of_is_system_power_controller helper function Romain Perier
2014-10-27 16:40 ` Felipe Balbi
2014-10-27 17:03 ` Heiko Stübner
2014-10-27 16:26 ` [PATCH v2 04/10] ARM: dts: rockchip: Enable power off in pmic for Radxa Rock Romain Perier
2014-10-27 16:26 ` [PATCH v1 05/10] dt-bindings: act8865: Update documentation about property system-power-controller Romain Perier
2014-10-27 16:26 ` [PATCH v2 06/10] mfd: tps65910: Use the standard DT " Romain Perier
2014-10-27 16:35 ` Lucas Stach
2014-10-27 16:41 ` Felipe Balbi
2014-10-27 16:43 ` Johan Hovold
2014-10-27 16:53 ` Romain Perier
2014-10-27 16:49 ` Heiko Stübner
2014-10-27 16:49 ` Felipe Balbi
2014-10-27 16:41 ` Felipe Balbi
2014-10-27 16:26 ` [PATCH v2 07/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 apalis Romain Perier
2014-10-27 16:42 ` Felipe Balbi
2014-10-28 4:34 ` Alexandre Courbot
2014-10-28 6:47 ` Romain Perier
2014-10-27 16:26 ` [PATCH v2 08/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 beaver Romain Perier
2014-10-27 16:42 ` Felipe Balbi
2014-10-27 16:26 ` [PATCH v2 09/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 cardhu Romain Perier
2014-10-27 16:26 ` [PATCH v2 10/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 colibri Romain Perier
2014-10-27 16:38 ` [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller" Felipe Balbi
2014-10-27 16:41 ` Johan Hovold
2014-10-27 16:47 ` Felipe Balbi
2014-10-27 17:02 ` Johan Hovold
2014-10-27 17:05 ` Heiko Stübner
2014-10-27 17:08 ` Felipe Balbi [this message]
2014-10-27 17:16 ` Johan Hovold
2014-10-27 18:16 ` Romain Perier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141027170806.GL14253@saruman \
--to=balbi@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).