From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: OMAP baseline test results for v3.18-rc1
Date: Mon, 27 Oct 2014 12:59:12 -0700 [thread overview]
Message-ID: <20141027195912.GQ2560@atomide.com> (raw)
In-Reply-To: <20141027155344.GK2542@atomide.com>
* Tony Lindgren <tony@atomide.com> [141027 08:56]:
> * Paul Walmsley <paul@pwsan.com> [141023 08:21]:
> > On Mon, 20 Oct 2014, Paul Walmsley wrote:
> >
> > > Boot-time memory difference
> > > (delta in bytes from test_v3.17-rc7 (fe82dcec644244676d55a1384c958d5f67979adb))
> > > avail rsrvd high freed board kconfig
> > > -117908k -13164k . -148k 2420n800 omap2plus_defconfig_n800_only_a
> > > -1012k 1012k . . 2430sdp omap2plus_defconfig
> > > -1268k 1268k . 16k 3530es31beagle omap2plus_defconfig
> > > -1268k 1268k . 16k 3530es3beagle omap2plus_defconfig
> > > -1780k 1780k . 16k 3730beaglexm omap2plus_defconfig
> > > -1780k 1780k . 16k 3730es12beaglexmomap2plus_defconfig
> > > -1268k 1268k . 16k 37xxevm omap2plus_defconfig
> > > -2780k 2780k -16384k 16k 4460pandaes omap2plus_defconfig
> > > -2776k 2776k -16384k 16k 4460varsomom omap2plus_defconfig
> > > -4848k 4848k -16384k 16k 5430es2sbct54 omap2plus_defconfig
> > > -4800k 4800k -16384k 16k 5430es2uevm omap2plus_defconfig
> > > -996k 996k . 8k am335xbone omap2plus_defconfig_am33xx_only
> > > -1268k 1268k . 16k am335xbonelt omap2plus_defconfig
> > >
> > >
> > > The size of an omap2plus_defconfig kernel has increased by 760K - a
> > > remarkable increase that fortunately does not appear to be matched by
> > > runtime memory consumption.
> >
> > Well let's take that back. I seem to have glazed over the 1 to 4MB (!)
> > runtime memory usage increases in boot memory consumption. That is also
> > an extraordinary increase.
>
> Probably mostly caused by 673ce00c5d6c (ARM: omap2plus_defconfig: Add
> support for distros with systemd). But I bet actually at least ipv6
> can be a loadable module here, I'll take a look.
Here's a fix that should help quite a bit with ipv6 as a loadable module.
Regards,
Tony
8< ---------------------
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 27 Oct 2014 09:00:21 -0700
Subject: [PATCH] ARM: omap2plus_defconfig: Fix bloat caused by having ipv6 built-in
Commit 673ce00c5d6c (ARM: omap2plus_defconfig: Add support for
distros with systemd) caused considerable bloat as noted by
Paul Walmsley <paul@pwsan.com>.
Let's fix this issue by making what we can into loadable modules
for the systemd options. That's only IPV6 and AUTOFS4_FS it
seems, and IPv6 defaults to a loadable module.
Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 16e719c..3fbad5b 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -86,7 +86,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
CONFIG_NETFILTER=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
@@ -317,7 +316,7 @@ CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS4_FS=m
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
prev parent reply other threads:[~2014-10-27 19:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-20 18:09 OMAP baseline test results for v3.18-rc1 Paul Walmsley
2014-10-20 18:13 ` Paul Walmsley
2014-10-27 15:53 ` Tony Lindgren
2014-10-27 19:59 ` Tony Lindgren [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141027195912.GQ2560@atomide.com \
--to=tony@atomide.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).