From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Tue, 28 Oct 2014 22:10:56 +0100 Subject: [RFC 0/3] ARM: sun9i: Add PRCM clocks and reset controls support In-Reply-To: <1413874167-6479-1-git-send-email-wens@csie.org> References: <1413874167-6479-1-git-send-email-wens@csie.org> Message-ID: <20141028211056.GC9255@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Chen-Yu, On Tue, Oct 21, 2014 at 02:49:24PM +0800, Chen-Yu Tsai wrote: > This series adds basic support for the PRCM module on sun9i, which > has clock and reset controls for the CPU-S or RTC block. > > The series is marked RFC, because we do not have actual documentation > for it. I am assuming the clock tree and register format is the same > as the A31 and A23. Obviously we will need to do some testing to verify, > which we would need actual peripherals to do. > > I'm posting this so Maxime can test his pinctrl drivers, and then we > can work out how to verify the clocks. This looks fine overall, but I'm a bit worried that there is too much that we don't really know about in this. Do we need it right now, or can it wait for some A80 documents to be released? Maybe we can just postpone this until we have more informations on this if it's not going to be used anytime soon anyway. Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: