From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 01/19] arm/arm64: KVM: rework MPIDR assignment and add accessors
Date: Mon, 3 Nov 2014 14:13:22 +0100 [thread overview]
Message-ID: <20141103131322.GB16132@cbox> (raw)
In-Reply-To: <1414776414-13426-2-git-send-email-andre.przywara@arm.com>
On Fri, Oct 31, 2014 at 05:26:36PM +0000, Andre Przywara wrote:
> The virtual MPIDR registers (containing topology information) for the
> guest are currently mapped linearily to the vcpu_id. Improve this
> mapping for arm64 by using three levels to not artificially limit the
> number of vCPUs. Also add an accessor to later allow easier access to
> a vCPU with a given MPIDR.
> Use this new accessor in the PSCI emulation.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> arch/arm/include/asm/kvm_emulate.h | 3 ++-
> arch/arm/include/asm/kvm_host.h | 2 ++
> arch/arm/kvm/arm.c | 15 +++++++++++++++
> arch/arm/kvm/psci.c | 15 ++++-----------
> arch/arm64/include/asm/kvm_emulate.h | 3 ++-
> arch/arm64/include/asm/kvm_host.h | 2 ++
> arch/arm64/kvm/sys_regs.c | 11 +++++++++--
> 7 files changed, 36 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h
> index b9db269..bd54383 100644
> --- a/arch/arm/include/asm/kvm_emulate.h
> +++ b/arch/arm/include/asm/kvm_emulate.h
> @@ -23,6 +23,7 @@
> #include <asm/kvm_asm.h>
> #include <asm/kvm_mmio.h>
> #include <asm/kvm_arm.h>
> +#include <asm/cputype.h>
>
> unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num);
> unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu);
> @@ -164,7 +165,7 @@ static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu)
>
> static inline unsigned long kvm_vcpu_get_mpidr(struct kvm_vcpu *vcpu)
> {
> - return vcpu->arch.cp15[c0_MPIDR];
> + return vcpu->arch.cp15[c0_MPIDR] & MPIDR_HWID_BITMASK;
> }
continuing the discussion from the previous version, yes, please don't
call it get_mpidr() if it returns a masked off version of get_mpidr(),
then call it get_mpidr_hwid() or something.
>
> static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
> index 53036e2..b443dfe 100644
> --- a/arch/arm/include/asm/kvm_host.h
> +++ b/arch/arm/include/asm/kvm_host.h
> @@ -236,6 +236,8 @@ static inline void vgic_arch_setup(const struct vgic_params *vgic)
> int kvm_perf_init(void);
> int kvm_perf_teardown(void);
>
> +struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
> +
> static inline void kvm_arch_hardware_disable(void) {}
> static inline void kvm_arch_hardware_unsetup(void) {}
> static inline void kvm_arch_sync_events(struct kvm *kvm) {}
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 9e193c8..61f13cc 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -977,6 +977,21 @@ static void check_kvm_target_cpu(void *ret)
> *(int *)ret = kvm_target_cpu();
> }
>
> +struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr)
> +{
> + unsigned long c_mpidr;
> + struct kvm_vcpu *vcpu;
> + int i;
> +
> + mpidr &= MPIDR_HWID_BITMASK;
> + kvm_for_each_vcpu(i, vcpu, kvm) {
> + c_mpidr = kvm_vcpu_get_mpidr(vcpu);
> + if (c_mpidr == mpidr)
> + return vcpu;
why do you need the c_mpidr variable at all?
> + }
> + return NULL;
> +}
> +
> /**
> * Initialize Hyp-mode and memory mappings on all CPUs.
> */
> diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c
> index 09cf377..49f0992 100644
> --- a/arch/arm/kvm/psci.c
> +++ b/arch/arm/kvm/psci.c
> @@ -21,6 +21,7 @@
> #include <asm/cputype.h>
> #include <asm/kvm_emulate.h>
> #include <asm/kvm_psci.h>
> +#include <asm/kvm_host.h>
>
> /*
> * This is an implementation of the Power State Coordination Interface
> @@ -65,25 +66,17 @@ static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
> static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
> {
> struct kvm *kvm = source_vcpu->kvm;
> - struct kvm_vcpu *vcpu = NULL, *tmp;
> + struct kvm_vcpu *vcpu = NULL;
> wait_queue_head_t *wq;
> unsigned long cpu_id;
> unsigned long context_id;
> - unsigned long mpidr;
> phys_addr_t target_pc;
> - int i;
>
> - cpu_id = *vcpu_reg(source_vcpu, 1);
> + cpu_id = *vcpu_reg(source_vcpu, 1) & MPIDR_HWID_BITMASK;
> if (vcpu_mode_is_32bit(source_vcpu))
> cpu_id &= ~((u32) 0);
>
> - kvm_for_each_vcpu(i, tmp, kvm) {
> - mpidr = kvm_vcpu_get_mpidr(tmp);
> - if ((mpidr & MPIDR_HWID_BITMASK) == (cpu_id & MPIDR_HWID_BITMASK)) {
> - vcpu = tmp;
> - break;
> - }
> - }
> + vcpu = kvm_mpidr_to_vcpu(kvm, cpu_id);
>
> /*
> * Make sure the caller requested a valid CPU and that the CPU is
> diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> index 5674a55..37316dd 100644
> --- a/arch/arm64/include/asm/kvm_emulate.h
> +++ b/arch/arm64/include/asm/kvm_emulate.h
> @@ -27,6 +27,7 @@
> #include <asm/kvm_arm.h>
> #include <asm/kvm_mmio.h>
> #include <asm/ptrace.h>
> +#include <asm/cputype.h>
>
> unsigned long *vcpu_reg32(const struct kvm_vcpu *vcpu, u8 reg_num);
> unsigned long *vcpu_spsr32(const struct kvm_vcpu *vcpu);
> @@ -184,7 +185,7 @@ static inline u8 kvm_vcpu_trap_get_fault_type(const struct kvm_vcpu *vcpu)
>
> static inline unsigned long kvm_vcpu_get_mpidr(struct kvm_vcpu *vcpu)
> {
> - return vcpu_sys_reg(vcpu, MPIDR_EL1);
> + return vcpu_sys_reg(vcpu, MPIDR_EL1) & MPIDR_HWID_BITMASK;
> }
>
> static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index 2012c4b..286bb61 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -207,6 +207,8 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
> int kvm_perf_init(void);
> int kvm_perf_teardown(void);
>
> +struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
> +
> static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
> phys_addr_t pgd_ptr,
> unsigned long hyp_stack_ptr,
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index 4cc3b71..dcc5867 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -252,10 +252,17 @@ static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
>
> static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
> {
> + u64 mpidr;
> +
> /*
> - * Simply map the vcpu_id into the Aff0 field of the MPIDR.
> + * Map the vcpu_id into the first three Aff fields of the MPIDR.
> + * Aff0 uses only 16 CPUs, since there is a SGI injection
> + * limitation of GICv3.
This last sentence is worded weirdly, so I suggested an alternative
version in my last review, which you missed/ignored. Please address it.
Thanks,
-Christoffer
next prev parent reply other threads:[~2014-11-03 13:13 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-31 17:26 [PATCH v3 00/19] KVM GICv3 emulation Andre Przywara
2014-10-31 17:26 ` [PATCH v3 01/19] arm/arm64: KVM: rework MPIDR assignment and add accessors Andre Przywara
2014-11-03 13:13 ` Christoffer Dall [this message]
2014-10-31 17:26 ` [PATCH v3 02/19] arm/arm64: KVM: pass down user space provided GIC type into vGIC code Andre Przywara
2014-11-03 13:14 ` Christoffer Dall
2014-11-03 13:25 ` Andre Przywara
2014-11-03 16:51 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 03/19] arm/arm64: KVM: refactor vgic_handle_mmio() function Andre Przywara
2014-11-03 13:23 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 04/19] arm/arm64: KVM: wrap 64 bit MMIO accesses with two 32 bit ones Andre Przywara
2014-11-03 13:25 ` Christoffer Dall
2014-11-04 12:18 ` Andre Przywara
2014-11-04 13:24 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 05/19] arm/arm64: KVM: introduce per-VM ops Andre Przywara
2014-11-03 13:59 ` Christoffer Dall
2014-11-04 15:58 ` Andre Przywara
2014-11-04 19:03 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 06/19] arm/arm64: KVM: move [sg]et_lr into " Andre Przywara
2014-11-03 14:15 ` Christoffer Dall
2014-11-04 16:30 ` Andre Przywara
2014-11-04 19:12 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 07/19] arm/arm64: KVM: move kvm_register_device_ops() into vGIC probing Andre Przywara
2014-11-03 20:05 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 08/19] arm/arm64: KVM: dont rely on a valid GICH base address Andre Przywara
2014-11-03 20:05 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 09/19] arm/arm64: KVM: make the maximum number of vCPUs a per-VM value Andre Przywara
2014-11-03 20:06 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 10/19] arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable Andre Przywara
2014-11-03 20:04 ` Christoffer Dall
2014-11-03 20:17 ` Marc Zyngier
2014-11-07 19:18 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 11/19] arm/arm64: KVM: refactor MMIO accessors Andre Przywara
2014-11-04 11:55 ` Christoffer Dall
2014-11-04 12:25 ` Andre Przywara
2014-10-31 17:26 ` [PATCH v3 12/19] arm/arm64: KVM: refactor/wrap vgic_set/get_attr() Andre Przywara
2014-11-04 19:30 ` Christoffer Dall
2014-11-05 10:27 ` Andre Przywara
2014-11-05 10:37 ` Andre Przywara
2014-11-05 12:57 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 13/19] arm/arm64: KVM: add vgic.h header file Andre Przywara
2014-11-04 19:30 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 14/19] arm/arm64: KVM: split GICv2 specific emulation code from vgic.c Andre Przywara
2014-11-04 19:30 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 15/19] arm/arm64: KVM: add opaque private pointer to MMIO accessors Andre Przywara
2014-11-04 15:44 ` Christoffer Dall
2014-11-04 17:24 ` Andre Przywara
2014-11-04 18:05 ` Marc Zyngier
2014-11-04 19:18 ` Christoffer Dall
2014-11-04 20:17 ` Marc Zyngier
2014-11-05 9:49 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 16/19] arm/arm64: KVM: add virtual GICv3 distributor emulation Andre Przywara
2014-11-07 14:30 ` Christoffer Dall
2014-11-10 17:30 ` [PATCH v3 16/19] arm/arm64: KVM: add virtual GICv3 distributor emulation / PART 1 Andre Przywara
2014-11-11 13:48 ` Christoffer Dall
2014-11-12 12:39 ` [PATCH v3 16/19] arm/arm64: KVM: add virtual GICv3 distributor emulation / PART 2 Andre Przywara
2014-11-12 19:51 ` Christoffer Dall
2014-11-13 11:18 ` Christoffer Dall
2014-11-13 11:45 ` Marc Zyngier
2014-11-13 12:01 ` Andre Przywara
2014-10-31 17:26 ` [PATCH v3 17/19] arm64: KVM: add SGI system register trapping Andre Przywara
2014-11-07 15:07 ` Christoffer Dall
2014-11-10 11:31 ` Andre Przywara
2014-11-10 12:45 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 18/19] arm/arm64: KVM: enable kernel side of GICv3 emulation Andre Przywara
2014-11-07 16:07 ` Christoffer Dall
2014-11-10 12:19 ` Andre Przywara
2014-11-10 13:24 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 19/19] arm/arm64: KVM: allow userland to request a virtual GICv3 Andre Przywara
2014-11-07 16:15 ` Christoffer Dall
2014-11-10 12:26 ` Andre Przywara
2014-11-10 13:25 ` Christoffer Dall
2014-11-03 12:59 ` [PATCH v3 00/19] KVM GICv3 emulation Christoffer Dall
2014-11-06 10:57 ` Christoffer Dall
2014-11-06 11:21 ` Christoffer Dall
2014-11-06 15:13 ` Andre Przywara
2014-11-06 18:09 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141103131322.GB16132@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).