From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 05/19] arm/arm64: KVM: introduce per-VM ops
Date: Mon, 3 Nov 2014 14:59:23 +0100 [thread overview]
Message-ID: <20141103135923.GF16132@cbox> (raw)
In-Reply-To: <1414776414-13426-6-git-send-email-andre.przywara@arm.com>
On Fri, Oct 31, 2014 at 05:26:40PM +0000, Andre Przywara wrote:
> Currently we only have one virtual GIC model supported, so all guests
> use the same emulation code. With the addition of another model we
> end up with different guests using potentially different vGIC models,
> so we have to split up some functions to be per VM.
> Introduce a vgic_vm_ops struct to hold function pointers for those
> functions that are different and provide the necessary code to
> initialize them.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> include/kvm/arm_vgic.h | 10 ++++++
> virt/kvm/arm/vgic.c | 81 +++++++++++++++++++++++++++++++++++-------------
> 2 files changed, 69 insertions(+), 22 deletions(-)
>
> diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
> index dde5a00..bfb660a 100644
> --- a/include/kvm/arm_vgic.h
> +++ b/include/kvm/arm_vgic.h
> @@ -134,6 +134,14 @@ struct vgic_params {
> void __iomem *vctrl_base;
> };
>
> +struct vgic_vm_ops {
> + bool (*handle_mmio)(struct kvm_vcpu *, struct kvm_run *,
> + struct kvm_exit_mmio *);
> + bool (*queue_sgi)(struct kvm_vcpu *vcpu, int irq);
> + void (*add_sgi_source)(struct kvm_vcpu *vcpu, int irq, int source);
> + int (*vgic_init)(struct kvm *kvm, const struct vgic_params *params);
> +};
> +
> struct vgic_dist {
> #ifdef CONFIG_KVM_ARM_VGIC
> spinlock_t lock;
> @@ -215,6 +223,8 @@ struct vgic_dist {
>
> /* Bitmap indicating which CPU has something pending */
> unsigned long *irq_pending_on_cpu;
> +
> + struct vgic_vm_ops vm_ops;
> #endif
> };
>
> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
> index 0cbdde9..2c16684 100644
> --- a/virt/kvm/arm/vgic.c
> +++ b/virt/kvm/arm/vgic.c
> @@ -105,6 +105,8 @@ static void vgic_set_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
> static const struct vgic_ops *vgic_ops;
> static const struct vgic_params *vgic;
>
> +#define vgic_vm_op(kvm, fn) ((kvm)->arch.vgic.vm_ops.fn)
> +
another one? why did you simply ignore my comment from the last review?
If it wasn't obvious last time around, YUCK, and no ;)
> /*
> * struct vgic_bitmap contains a bitmap made of unsigned longs, but
> * extracts u32s out of them.
> @@ -761,6 +763,13 @@ static bool handle_mmio_sgi_reg(struct kvm_vcpu *vcpu,
> return false;
> }
>
> +static void vgic_v2_add_sgi_source(struct kvm_vcpu *vcpu, int irq, int source)
> +{
> + struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
> +
> + *vgic_get_sgi_sources(dist, vcpu->vcpu_id, irq) |= 1 << source;
> +}
> +
> /**
> * vgic_unqueue_irqs - move pending IRQs from LRs to the distributor
> * @vgic_cpu: Pointer to the vgic_cpu struct holding the LRs
> @@ -775,9 +784,7 @@ static bool handle_mmio_sgi_reg(struct kvm_vcpu *vcpu,
> */
> static void vgic_unqueue_irqs(struct kvm_vcpu *vcpu)
> {
> - struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
> struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
> - int vcpu_id = vcpu->vcpu_id;
> int i;
>
> for_each_set_bit(i, vgic_cpu->lr_used, vgic_cpu->nr_lr) {
> @@ -804,7 +811,8 @@ static void vgic_unqueue_irqs(struct kvm_vcpu *vcpu)
> */
> vgic_dist_irq_set_pending(vcpu, lr.irq);
> if (lr.irq < VGIC_NR_SGIS)
> - *vgic_get_sgi_sources(dist, vcpu_id, lr.irq) |= 1 << lr.source;
> + vgic_vm_op(vcpu->kvm, add_sgi_source)(vcpu, lr.irq,
> + lr.source);
> lr.state &= ~LR_STATE_PENDING;
> vgic_set_lr(vcpu, i, lr);
>
> @@ -1162,7 +1170,7 @@ bool vgic_handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *run,
> if (!irqchip_in_kernel(vcpu->kvm))
> return false;
>
> - return vgic_v2_handle_mmio(vcpu, run, mmio);
> + return vgic_vm_op(vcpu->kvm, handle_mmio)(vcpu, run, mmio);
> }
>
> static u8 *vgic_get_sgi_sources(struct vgic_dist *dist, int vcpu_id, int sgi)
> @@ -1414,7 +1422,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
> return true;
> }
>
> -static bool vgic_queue_sgi(struct kvm_vcpu *vcpu, int irq)
> +static bool vgic_v2_queue_sgi(struct kvm_vcpu *vcpu, int irq)
> {
> struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
> unsigned long sources;
> @@ -1489,7 +1497,7 @@ static void __kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
>
> /* SGIs */
> for_each_set_bit(i, vgic_cpu->pending_percpu, VGIC_NR_SGIS) {
> - if (!vgic_queue_sgi(vcpu, i))
> + if (!vgic_vm_op(vcpu->kvm, queue_sgi)(vcpu, i))
> overflow = 1;
> }
>
> @@ -1944,9 +1952,6 @@ static int vgic_init_maps(struct kvm *kvm)
> }
> }
>
> - for (i = VGIC_NR_PRIVATE_IRQS; i < dist->nr_irqs; i += 4)
> - vgic_set_target_reg(kvm, 0, i);
> -
Remind me, why are we moving this chunk?
> out:
> if (ret)
> kvm_vgic_destroy(kvm);
> @@ -1954,6 +1959,31 @@ out:
> return ret;
> }
>
> +static int vgic_v2_init(struct kvm *kvm, const struct vgic_params *params)
> +{
> + struct vgic_dist *dist = &kvm->arch.vgic;
> + int ret, i;
> +
> + if (IS_VGIC_ADDR_UNDEF(dist->vgic_dist_base) ||
> + IS_VGIC_ADDR_UNDEF(dist->vgic_cpu_base)) {
> + kvm_err("Need to set vgic distributor addresses first\n");
> + return -ENXIO;
> + }
> +
> + ret = kvm_phys_addr_ioremap(kvm, dist->vgic_cpu_base,
> + params->vcpu_base,
> + KVM_VGIC_V2_CPU_SIZE, true);
> + if (ret) {
> + kvm_err("Unable to remap VGIC CPU to VCPU\n");
> + return ret;
> + }
> +
> + for (i = VGIC_NR_PRIVATE_IRQS; i < dist->nr_irqs; i += 4)
> + vgic_set_target_reg(kvm, 0, i);
> +
> + return 0;
> +}
> +
> /**
> * kvm_vgic_init - Initialize global VGIC state before running any VCPUs
> * @kvm: pointer to the kvm struct
> @@ -1976,26 +2006,15 @@ int kvm_vgic_init(struct kvm *kvm)
> if (vgic_initialized(kvm))
> goto out;
>
> - if (IS_VGIC_ADDR_UNDEF(kvm->arch.vgic.vgic_dist_base) ||
> - IS_VGIC_ADDR_UNDEF(kvm->arch.vgic.vgic_cpu_base)) {
> - kvm_err("Need to set vgic cpu and dist addresses first\n");
> - ret = -ENXIO;
> - goto out;
> - }
> -
> ret = vgic_init_maps(kvm);
> if (ret) {
> kvm_err("Unable to allocate maps\n");
> goto out;
> }
>
> - ret = kvm_phys_addr_ioremap(kvm, kvm->arch.vgic.vgic_cpu_base,
> - vgic->vcpu_base, KVM_VGIC_V2_CPU_SIZE,
> - true);
> - if (ret) {
> - kvm_err("Unable to remap VGIC CPU to VCPU\n");
> + ret = vgic_vm_op(kvm, vgic_init)(kvm, vgic);
> + if (ret)
> goto out;
> - }
>
> kvm_for_each_vcpu(i, vcpu, kvm)
> kvm_vgic_vcpu_init(vcpu);
> @@ -2008,6 +2027,21 @@ out:
> return ret;
> }
>
> +static bool init_emulation_ops(struct kvm *kvm, int type)
> +{
> + struct vgic_dist *dist = &kvm->arch.vgic;
> +
> + switch (type) {
> + case KVM_DEV_TYPE_ARM_VGIC_V2:
> + dist->vm_ops.handle_mmio = vgic_v2_handle_mmio;
> + dist->vm_ops.queue_sgi = vgic_v2_queue_sgi;
> + dist->vm_ops.add_sgi_source = vgic_v2_add_sgi_source;
> + dist->vm_ops.vgic_init = vgic_v2_init;
> + return true;
> + }
> + return false;
> +}
> +
> int kvm_vgic_create(struct kvm *kvm, u32 type)
> {
> int i, vcpu_lock_idx = -1, ret = 0;
> @@ -2045,6 +2079,9 @@ int kvm_vgic_create(struct kvm *kvm, u32 type)
> kvm->arch.vgic.vgic_dist_base = VGIC_ADDR_UNDEF;
> kvm->arch.vgic.vgic_cpu_base = VGIC_ADDR_UNDEF;
>
> + if (!init_emulation_ops(kvm, type))
> + ret = -ENODEV;
> +
> out_unlock:
> for (; vcpu_lock_idx >= 0; vcpu_lock_idx--) {
> vcpu = kvm_get_vcpu(kvm, vcpu_lock_idx);
> --
> 1.7.9.5
>
-Christoffer
next prev parent reply other threads:[~2014-11-03 13:59 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-31 17:26 [PATCH v3 00/19] KVM GICv3 emulation Andre Przywara
2014-10-31 17:26 ` [PATCH v3 01/19] arm/arm64: KVM: rework MPIDR assignment and add accessors Andre Przywara
2014-11-03 13:13 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 02/19] arm/arm64: KVM: pass down user space provided GIC type into vGIC code Andre Przywara
2014-11-03 13:14 ` Christoffer Dall
2014-11-03 13:25 ` Andre Przywara
2014-11-03 16:51 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 03/19] arm/arm64: KVM: refactor vgic_handle_mmio() function Andre Przywara
2014-11-03 13:23 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 04/19] arm/arm64: KVM: wrap 64 bit MMIO accesses with two 32 bit ones Andre Przywara
2014-11-03 13:25 ` Christoffer Dall
2014-11-04 12:18 ` Andre Przywara
2014-11-04 13:24 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 05/19] arm/arm64: KVM: introduce per-VM ops Andre Przywara
2014-11-03 13:59 ` Christoffer Dall [this message]
2014-11-04 15:58 ` Andre Przywara
2014-11-04 19:03 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 06/19] arm/arm64: KVM: move [sg]et_lr into " Andre Przywara
2014-11-03 14:15 ` Christoffer Dall
2014-11-04 16:30 ` Andre Przywara
2014-11-04 19:12 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 07/19] arm/arm64: KVM: move kvm_register_device_ops() into vGIC probing Andre Przywara
2014-11-03 20:05 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 08/19] arm/arm64: KVM: dont rely on a valid GICH base address Andre Przywara
2014-11-03 20:05 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 09/19] arm/arm64: KVM: make the maximum number of vCPUs a per-VM value Andre Przywara
2014-11-03 20:06 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 10/19] arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable Andre Przywara
2014-11-03 20:04 ` Christoffer Dall
2014-11-03 20:17 ` Marc Zyngier
2014-11-07 19:18 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 11/19] arm/arm64: KVM: refactor MMIO accessors Andre Przywara
2014-11-04 11:55 ` Christoffer Dall
2014-11-04 12:25 ` Andre Przywara
2014-10-31 17:26 ` [PATCH v3 12/19] arm/arm64: KVM: refactor/wrap vgic_set/get_attr() Andre Przywara
2014-11-04 19:30 ` Christoffer Dall
2014-11-05 10:27 ` Andre Przywara
2014-11-05 10:37 ` Andre Przywara
2014-11-05 12:57 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 13/19] arm/arm64: KVM: add vgic.h header file Andre Przywara
2014-11-04 19:30 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 14/19] arm/arm64: KVM: split GICv2 specific emulation code from vgic.c Andre Przywara
2014-11-04 19:30 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 15/19] arm/arm64: KVM: add opaque private pointer to MMIO accessors Andre Przywara
2014-11-04 15:44 ` Christoffer Dall
2014-11-04 17:24 ` Andre Przywara
2014-11-04 18:05 ` Marc Zyngier
2014-11-04 19:18 ` Christoffer Dall
2014-11-04 20:17 ` Marc Zyngier
2014-11-05 9:49 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 16/19] arm/arm64: KVM: add virtual GICv3 distributor emulation Andre Przywara
2014-11-07 14:30 ` Christoffer Dall
2014-11-10 17:30 ` [PATCH v3 16/19] arm/arm64: KVM: add virtual GICv3 distributor emulation / PART 1 Andre Przywara
2014-11-11 13:48 ` Christoffer Dall
2014-11-12 12:39 ` [PATCH v3 16/19] arm/arm64: KVM: add virtual GICv3 distributor emulation / PART 2 Andre Przywara
2014-11-12 19:51 ` Christoffer Dall
2014-11-13 11:18 ` Christoffer Dall
2014-11-13 11:45 ` Marc Zyngier
2014-11-13 12:01 ` Andre Przywara
2014-10-31 17:26 ` [PATCH v3 17/19] arm64: KVM: add SGI system register trapping Andre Przywara
2014-11-07 15:07 ` Christoffer Dall
2014-11-10 11:31 ` Andre Przywara
2014-11-10 12:45 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 18/19] arm/arm64: KVM: enable kernel side of GICv3 emulation Andre Przywara
2014-11-07 16:07 ` Christoffer Dall
2014-11-10 12:19 ` Andre Przywara
2014-11-10 13:24 ` Christoffer Dall
2014-10-31 17:26 ` [PATCH v3 19/19] arm/arm64: KVM: allow userland to request a virtual GICv3 Andre Przywara
2014-11-07 16:15 ` Christoffer Dall
2014-11-10 12:26 ` Andre Przywara
2014-11-10 13:25 ` Christoffer Dall
2014-11-03 12:59 ` [PATCH v3 00/19] KVM GICv3 emulation Christoffer Dall
2014-11-06 10:57 ` Christoffer Dall
2014-11-06 11:21 ` Christoffer Dall
2014-11-06 15:13 ` Andre Przywara
2014-11-06 18:09 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141103135923.GF16132@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).