[RESEND PATCH 0/3] ARM: OMAP2+: Remove remaining unused legacy code

[RESEND PATCH 0/3] ARM: OMAP2+: Remove remaining unused legacy code

[Javier Martinez Canillas]

Once OMAP2+ board files are removed, there is unused code that was only used
by legacy platform code and can be removed.

This patch-set depends on the series:

[PATCH 00/12] Drop omap3 board files and make mach-omap2 boot in DT only mode [0]

and is composed of the following patches:

[RESEND PATCH 1/3] ARM: OMAP2+: Remove legacy smsc911x and smc91x
[RESEND PATCH 2/3] ARM: OMAP2+: Remove unnecesary include in GPMC
[RESEND PATCH 3/3] ARM: OMAP2+: Remove legacy board-flash.c

Tony,

I don't know what is your new schedule for board files removal but in case it is
3.16, I forward ported this patch-set on top of 3.14-rc7 and fixed some conflicts.

Best regards,
Javier

[0]: http://marc.info/?t=138542504600001&r=1&w=2

[RESEND PATCH 1/3] ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support

[Javier Martinez Canillas]

When connecting an ethernet chip to the GPMC, such as smc91x
or smsc911x, a GPIO has to be requested to be used as an IRQ
and also the IO memory for a GPMC chip-select.

When booting with DT the chip-select allocation is handled
in a generic manner in the GPMC driver and the GPIO to IRQ
mapping is made by the DT core so this code is not needed
anymore now that mach-omap2 related boards are DT-only.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile        |   5 -
 arch/arm/mach-omap2/gpmc-smc91x.c   | 186 ------------------------------------
 arch/arm/mach-omap2/gpmc-smc91x.h   |  42 --------
 arch/arm/mach-omap2/gpmc-smsc911x.c | 100 -------------------
 arch/arm/mach-omap2/gpmc-smsc911x.h |  35 -------
 5 files changed, 368 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/gpmc-smc91x.c
 delete mode 100644 arch/arm/mach-omap2/gpmc-smc91x.h
 delete mode 100644 arch/arm/mach-omap2/gpmc-smsc911x.c
 delete mode 100644 arch/arm/mach-omap2/gpmc-smsc911x.h

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index e6eec6f..103f1e8 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -283,11 +283,6 @@ obj-y					+= $(onenand-m) $(onenand-y)
 nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
 obj-y					+= $(nand-m) $(nand-y)
 
-smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
-obj-y					+= $(smc91x-m) $(smc91x-y)
-
-smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
-obj-y					+= $(smsc911x-m) $(smsc911x-y)
 ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
 obj-y					+= hwspinlock.o
 endif
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
deleted file mode 100644
index 61a0635..0000000
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/gpmc-smc91x.c
- *
- * Copyright (C) 2009 Nokia Corporation
- * Contact:	Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-
-#include "gpmc.h"
-#include "gpmc-smc91x.h"
-
-#include "soc.h"
-
-static struct omap_smc91x_platform_data *gpmc_cfg;
-
-static struct resource gpmc_smc91x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smc91x_platdata gpmc_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct platform_device gpmc_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &gpmc_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
-	.resource	= gpmc_smc91x_resources,
-};
-
-static struct gpmc_settings smc91x_settings = {
-	.device_width = GPMC_DEVWIDTH_16BIT,
-};
-
-/*
- * Set the gpmc timings for smc91c96. The timings are taken
- * from the data sheet available at:
- * http://www.smsc.com/main/catalog/lan91c96.html
- * REVISIT: Level shifters can add at least to the access latency.
- */
-static int smc91c96_gpmc_retime(void)
-{
-	struct gpmc_timings t;
-	struct gpmc_device_timings dev_t;
-	const int t3 = 10;	/* Figure 12.2 read and 12.4 write */
-	const int t4_r = 20;	/* Figure 12.2 read */
-	const int t4_w = 5;	/* Figure 12.4 write */
-	const int t5 = 25;	/* Figure 12.2 read */
-	const int t6 = 15;	/* Figure 12.2 read */
-	const int t7 = 5;	/* Figure 12.4 write */
-	const int t8 = 5;	/* Figure 12.4 write */
-	const int t20 = 185;	/* Figure 12.2 read and 12.4 write */
-
-	/*
-	 * FIXME: Calculate the address and data bus muxed timings.
-	 * Note that at least adv_rd_off needs to be changed according
-	 * to omap3430 TRM Figure 11-11. Are the sdp boards using the
-	 * FPGA in between smc91x and omap as the timings are different
-	 * from above?
-	 */
-	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
-		return 0;
-
-	memset(&dev_t, 0, sizeof(dev_t));
-
-	dev_t.t_oeasu = t3 * 1000;
-	dev_t.t_oe = t5 * 1000;
-	dev_t.t_cez_r = t4_r * 1000;
-	dev_t.t_oez = t6 * 1000;
-	dev_t.t_rd_cycle = (t20 - t3) * 1000;
-
-	dev_t.t_weasu = t3 * 1000;
-	dev_t.t_wpl = t7 * 1000;
-	dev_t.t_wph = t8 * 1000;
-	dev_t.t_cez_w = t4_w * 1000;
-	dev_t.t_wr_cycle = (t20 - t3) * 1000;
-
-	gpmc_calc_timings(&t, &smc91x_settings, &dev_t);
-
-	return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
-}
-
-/*
- * Initialize smc91x device connected to the GPMC. Note that we
- * assume that pin multiplexing is done in the board-*.c file,
- * or in the bootloader.
- */
-void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
-{
-	unsigned long cs_mem_base;
-	int ret;
-
-	gpmc_cfg = board_data;
-
-	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
-		gpmc_cfg->retime = smc91c96_gpmc_retime;
-
-	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
-	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
-
-	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
-		smc91x_settings.mux_add_data = GPMC_MUX_AD;
-	if (gpmc_cfg->flags & GPMC_READ_MON)
-		smc91x_settings.wait_on_read = true;
-	if (gpmc_cfg->flags & GPMC_WRITE_MON)
-		smc91x_settings.wait_on_write = true;
-	if (gpmc_cfg->wait_pin)
-		smc91x_settings.wait_pin = gpmc_cfg->wait_pin;
-	ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings);
-	if (ret < 0)
-		goto free1;
-
-	if (gpmc_cfg->retime) {
-		ret = gpmc_cfg->retime();
-		if (ret != 0)
-			goto free1;
-	}
-
-	if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0)
-		goto free1;
-
-	gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
-
-	if (gpmc_cfg->gpio_pwrdwn) {
-		ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn,
-				       GPIOF_OUT_INIT_LOW, "SMC91X powerdown");
-		if (ret)
-			goto free2;
-	}
-
-	if (gpmc_cfg->gpio_reset) {
-		ret = gpio_request_one(gpmc_cfg->gpio_reset,
-				       GPIOF_OUT_INIT_LOW, "SMC91X reset");
-		if (ret)
-			goto free3;
-
-		gpio_set_value(gpmc_cfg->gpio_reset, 1);
-		msleep(100);
-		gpio_set_value(gpmc_cfg->gpio_reset, 0);
-	}
-
-	if (platform_device_register(&gpmc_smc91x_device) < 0) {
-		printk(KERN_ERR "Unable to register smc91x device\n");
-		gpio_free(gpmc_cfg->gpio_reset);
-		goto free3;
-	}
-
-	return;
-
-free3:
-	if (gpmc_cfg->gpio_pwrdwn)
-		gpio_free(gpmc_cfg->gpio_pwrdwn);
-free2:
-	gpio_free(gpmc_cfg->gpio_irq);
-free1:
-	gpmc_cs_free(gpmc_cfg->cs);
-
-	printk(KERN_ERR "Could not initialize smc91x\n");
-}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.h b/arch/arm/mach-omap2/gpmc-smc91x.h
deleted file mode 100644
index b64fbee..0000000
--- a/arch/arm/mach-omap2/gpmc-smc91x.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
-
-#define GPMC_TIMINGS_SMC91C96	(1 << 4)
-#define GPMC_MUX_ADD_DATA	(1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
-#define GPMC_READ_MON		(1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
-#define GPMC_WRITE_MON		(1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
-
-struct omap_smc91x_platform_data {
-	int	cs;
-	int	gpio_irq;
-	int	gpio_pwrdwn;
-	int	gpio_reset;
-	int	wait_pin;	/* Optional GPMC_CONFIG1_WAITPINSELECT */
-	u32	flags;
-	int	(*retime)(void);
-};
-
-#if defined(CONFIG_SMC91X) || \
-	defined(CONFIG_SMC91X_MODULE)
-
-extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
-
-#else
-
-#define board_smc91x_data	NULL
-
-static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
-{
-}
-
-#endif
-#endif
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
deleted file mode 100644
index 2757504..0000000
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/gpmc-smsc911x.c
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-
-#include "gpmc.h"
-#include "gpmc-smsc911x.h"
-
-static struct resource gpmc_smsc911x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct smsc911x_platform_config gpmc_smsc911x_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-};
-
-/*
- * Initialize smsc911x device connected to the GPMC. Note that we
- * assume that pin multiplexing is done in the board-*.c file,
- * or in the bootloader.
- */
-void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
-{
-	struct platform_device *pdev;
-	unsigned long cs_mem_base;
-	int ret;
-
-	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
-		pr_err("Failed to request GPMC mem region\n");
-		return;
-	}
-
-	gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0;
-	gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;
-
-	if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) {
-		pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq);
-		goto free1;
-	}
-
-	gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
-
-	if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
-		ret = gpio_request_one(gpmc_cfg->gpio_reset,
-				       GPIOF_OUT_INIT_HIGH, "smsc911x reset");
-		if (ret) {
-			pr_err("Failed to request reset GPIO%d\n",
-			       gpmc_cfg->gpio_reset);
-			goto free2;
-		}
-
-		gpio_set_value(gpmc_cfg->gpio_reset, 0);
-		msleep(100);
-		gpio_set_value(gpmc_cfg->gpio_reset, 1);
-	}
-
-	gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;
-
-	pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
-		 gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
-		 &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config));
-	if (IS_ERR(pdev)) {
-		pr_err("Unable to register platform device\n");
-		gpio_free(gpmc_cfg->gpio_reset);
-		goto free2;
-	}
-
-	return;
-
-free2:
-	gpio_free(gpmc_cfg->gpio_irq);
-free1:
-	gpmc_cs_free(gpmc_cfg->cs);
-
-	pr_err("Could not initialize smsc911x device\n");
-}
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.h b/arch/arm/mach-omap2/gpmc-smsc911x.h
deleted file mode 100644
index ea6c9c8..0000000
--- a/arch/arm/mach-omap2/gpmc-smsc911x.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
- *
- * Copyright (C) 2009 Li-Pro.Net
- * Stephan Linz <linz@li-pro.net>
- *
- * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
-
-struct omap_smsc911x_platform_data {
-	int	id;
-	int	cs;
-	int	gpio_irq;
-	int	gpio_reset;
-	u32	flags;
-};
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
-
-#else
-
-static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
-{
-}
-
-#endif
-#endif
-- 
1.9.0

[RESEND PATCH 2/3] ARM: OMAP2+: Remove unnecesary include in GPMC driver

[Javier Martinez Canillas]

The GPMC driver includes arch/arm/mach-omap2/common.h but
does not use anything on that header so it can be removed.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/gpmc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index ab43755..b637c96 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -37,7 +37,6 @@
 #include <asm/mach-types.h>
 
 #include "soc.h"
-#include "common.h"
 #include "omap_device.h"
 #include "gpmc.h"
 #include "gpmc-nand.h"
-- 
1.9.0

[RESEND PATCH 2/3] ARM: OMAP2+: Remove unnecesary include in GPMC driver

[Tony Lindgren]

* Javier Martinez Canillas <javier.martinez@collabora.co.uk> [140318 23:12]:
> The GPMC driver includes arch/arm/mach-omap2/common.h but
> does not use anything on that header so it can be removed.
> 
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> Signed-off-by: Tony Lindgren <tony@atomide.com>

Probably meant Cc here? :) I'll apply this into omap-for-v3.19/gpmc,
the rest will need to wait until omap3 is DT only.

Regards,

Tony

> ---
>  arch/arm/mach-omap2/gpmc.c | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
> index ab43755..b637c96 100644
> --- a/arch/arm/mach-omap2/gpmc.c
> +++ b/arch/arm/mach-omap2/gpmc.c
> @@ -37,7 +37,6 @@
>  #include <asm/mach-types.h>
>  
>  #include "soc.h"
> -#include "common.h"
>  #include "omap_device.h"
>  #include "gpmc.h"
>  #include "gpmc-nand.h"
> -- 
> 1.9.0
> 

[RESEND PATCH 2/3] ARM: OMAP2+: Remove unnecesary include in GPMC driver

[Javier Martinez Canillas]

Hello Tony,

On 11/06/2014 07:52 PM, Tony Lindgren wrote:
> * Javier Martinez Canillas <javier.martinez@collabora.co.uk> [140318 23:12]:
>> The GPMC driver includes arch/arm/mach-omap2/common.h but
>> does not use anything on that header so it can be removed.
>> 
>> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>> Signed-off-by: Tony Lindgren <tony@atomide.com>
> 
> Probably meant Cc here? :) I'll apply this into omap-for-v3.19/gpmc,
> the rest will need to wait until omap3 is DT only.
> 

Ups, I don't know how your s-o-b ended there :)

Thanks a lot for picking such an old patch.

Best regards,
Javier

[RESEND PATCH 3/3] ARM: OMAP2+: Remove legacy board-flash.c

[Javier Martinez Canillas]

Legacy board files in mach-omap2 used the helper functions
board_{nor,nand,onenand}_init() to initialize the flash
devices attached to the GPMC.

With Device Tree booting the initialization is handled by
the GPMC driver gpmc_probe_*_child() functions so this
code is not needed anymore now that OMAP2+ is DT-only.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Makefile      |   4 -
 arch/arm/mach-omap2/board-flash.c | 245 --------------------------------------
 arch/arm/mach-omap2/board-flash.h |  62 ----------
 3 files changed, 311 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/board-flash.c
 delete mode 100644 arch/arm/mach-omap2/board-flash.h

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 103f1e8..aa75e9b 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -264,10 +264,6 @@ obj-$(CONFIG_MACH_TI8148EVM)		+= board-ti8168evm.o
 
 # Platform specific device init code
 
-omap-flash-$(CONFIG_MTD_NAND_OMAP2)	:= board-flash.o
-omap-flash-$(CONFIG_MTD_ONENAND_OMAP2)	:= board-flash.o
-obj-y					+= $(omap-flash-y) $(omap-flash-m)
-
 omap-hsmmc-$(CONFIG_MMC_OMAP_HS)	:= hsmmc.o
 obj-y					+= $(omap-hsmmc-m) $(omap-hsmmc-y)
 
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
deleted file mode 100644
index ac82512..0000000
--- a/arch/arm/mach-omap2/board-flash.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * board-flash.c
- * Modified from mach-omap2/board-3430sdp-flash.c
- *
- * Copyright (C) 2009 Nokia Corporation
- * Copyright (C) 2009 Texas Instruments
- *
- * Vimal Singh <vimalsingh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#include "soc.h"
-#include "common.h"
-#include "board-flash.h"
-#include "gpmc-onenand.h"
-#include "gpmc-nand.h"
-
-#define REG_FPGA_REV			0x10
-#define REG_FPGA_DIP_SWITCH_INPUT2	0x60
-#define MAX_SUPPORTED_GPMC_CONFIG	3
-
-#define DEBUG_BASE		0x08000000 /* debug board */
-
-/* various memory sizes */
-#define FLASH_SIZE_SDPV1	SZ_64M	/* NOR flash (64 Meg aligned) */
-#define FLASH_SIZE_SDPV2	SZ_128M	/* NOR flash (256 Meg aligned) */
-
-static struct physmap_flash_data board_nor_data = {
-	.width		= 2,
-};
-
-static struct resource board_nor_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device board_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-			.platform_data = &board_nor_data,
-	},
-	.num_resources	= 1,
-	.resource	= &board_nor_resource,
-};
-
-static void
-__init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-	int err;
-
-	board_nor_data.parts	= nor_parts;
-	board_nor_data.nr_parts	= nr_parts;
-
-	/* Configure start address and size of NOR device */
-	if (omap_rev() >= OMAP3430_REV_ES1_0) {
-		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV2 - 1,
-				(unsigned long *)&board_nor_resource.start);
-		board_nor_resource.end = board_nor_resource.start
-					+ FLASH_SIZE_SDPV2 - 1;
-	} else {
-		err = gpmc_cs_request(cs, FLASH_SIZE_SDPV1 - 1,
-				(unsigned long *)&board_nor_resource.start);
-		board_nor_resource.end = board_nor_resource.start
-					+ FLASH_SIZE_SDPV1 - 1;
-	}
-	if (err < 0) {
-		pr_err("NOR: Can't request GPMC CS\n");
-		return;
-	}
-	if (platform_device_register(&board_nor_device) < 0)
-		pr_err("Unable to register NOR device\n");
-}
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-static struct omap_onenand_platform_data board_onenand_data = {
-	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
-};
-
-void
-__init board_onenand_init(struct mtd_partition *onenand_parts,
-				u8 nr_parts, u8 cs)
-{
-	board_onenand_data.cs		= cs;
-	board_onenand_data.parts	= onenand_parts;
-	board_onenand_data.nr_parts	= nr_parts;
-
-	gpmc_onenand_init(&board_onenand_data);
-}
-#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-
-/* Note that all values in this struct are in nanoseconds */
-struct gpmc_timings nand_default_timings[1] = {
-	{
-		.sync_clk = 0,
-
-		.cs_on = 0,
-		.cs_rd_off = 36,
-		.cs_wr_off = 36,
-
-		.we_on = 6,
-		.oe_on = 6,
-
-		.adv_on = 6,
-		.adv_rd_off = 24,
-		.adv_wr_off = 36,
-
-		.we_off = 30,
-		.oe_off = 48,
-
-		.access = 54,
-		.rd_cycle = 72,
-		.wr_cycle = 72,
-
-		.wr_access = 30,
-		.wr_data_mux_bus = 0,
-	},
-};
-
-static struct omap_nand_platform_data board_nand_data;
-
-void
-__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
-				int nand_type, struct gpmc_timings *gpmc_t)
-{
-	board_nand_data.cs		= cs;
-	board_nand_data.parts		= nand_parts;
-	board_nand_data.nr_parts	= nr_parts;
-	board_nand_data.devsize		= nand_type;
-
-	board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
-	gpmc_nand_init(&board_nand_data, gpmc_t);
-}
-#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
-
-/**
- * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get
- * the various cs values.
- */
-static u8 get_gpmc0_type(void)
-{
-	u8 cs = 0;
-	void __iomem *fpga_map_addr;
-
-	fpga_map_addr = ioremap(DEBUG_BASE, 4096);
-	if (!fpga_map_addr)
-		return -ENOMEM;
-
-	if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV)))
-		/* we dont have an DEBUG FPGA??? */
-		/* Depend on #defines!! default to strata boot return param */
-		goto unmap;
-
-	/* S8-DIP-OFF = 1, S8-DIP-ON = 0 */
-	cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf;
-
-	/* ES2.0 SDP's onwards 4 dip switches are provided for CS */
-	if (omap_rev() >= OMAP3430_REV_ES1_0)
-		/* change (S8-1:4=DS-2:0) to (S8-4:1=DS-2:0) */
-		cs = ((cs & 8) >> 3) | ((cs & 4) >> 1) |
-			((cs & 2) << 1) | ((cs & 1) << 3);
-	else
-		/* change (S8-1:3=DS-2:0) to (S8-3:1=DS-2:0) */
-		cs = ((cs & 4) >> 2) | (cs & 2) | ((cs & 1) << 2);
-unmap:
-	iounmap(fpga_map_addr);
-	return cs;
-}
-
-/**
- * board_flash_init - Identify devices connected to GPMC and register.
- *
- * @return - void.
- */
-void __init board_flash_init(struct flash_partitions partition_info[],
-			char chip_sel_board[][GPMC_CS_NUM], int nand_type)
-{
-	u8		cs = 0;
-	u8		norcs = GPMC_CS_NUM + 1;
-	u8		nandcs = GPMC_CS_NUM + 1;
-	u8		onenandcs = GPMC_CS_NUM + 1;
-	u8		idx;
-	unsigned char	*config_sel = NULL;
-
-	/* REVISIT: Is this return correct idx for 2430 SDP?
-	 * for which cs configuration matches for 2430 SDP?
-	 */
-	idx = get_gpmc0_type();
-	if (idx >= MAX_SUPPORTED_GPMC_CONFIG) {
-		pr_err("%s: Invalid chip select: %d\n", __func__, cs);
-		return;
-	}
-	config_sel = (unsigned char *)(chip_sel_board[idx]);
-
-	while (cs < GPMC_CS_NUM) {
-		switch (config_sel[cs]) {
-		case PDC_NOR:
-			if (norcs > GPMC_CS_NUM)
-				norcs = cs;
-			break;
-		case PDC_NAND:
-			if (nandcs > GPMC_CS_NUM)
-				nandcs = cs;
-			break;
-		case PDC_ONENAND:
-			if (onenandcs > GPMC_CS_NUM)
-				onenandcs = cs;
-			break;
-		}
-		cs++;
-	}
-
-	if (norcs > GPMC_CS_NUM)
-		pr_err("NOR: Unable to find configuration in GPMC\n");
-	else
-		board_nor_init(partition_info[0].parts,
-				partition_info[0].nr_parts, norcs);
-
-	if (onenandcs > GPMC_CS_NUM)
-		pr_err("OneNAND: Unable to find configuration in GPMC\n");
-	else
-		board_onenand_init(partition_info[1].parts,
-					partition_info[1].nr_parts, onenandcs);
-
-	if (nandcs > GPMC_CS_NUM)
-		pr_err("NAND: Unable to find configuration in GPMC\n");
-	else
-		board_nand_init(partition_info[2].parts,
-			partition_info[2].nr_parts, nandcs,
-			nand_type, nand_default_timings);
-}
diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h
deleted file mode 100644
index 2fb5d41..0000000
--- a/arch/arm/mach-omap2/board-flash.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- *  board-sdp.h
- *
- *  Information structures for SDP-specific board config data
- *
- *  Copyright (C) 2009 Nokia Corporation
- *  Copyright (C) 2009 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include "gpmc.h"
-
-#define PDC_NOR		1
-#define PDC_NAND	2
-#define PDC_ONENAND	3
-#define DBG_MPDB	4
-
-struct flash_partitions {
-	struct mtd_partition *parts;
-	int nr_parts;
-};
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-extern void board_flash_init(struct flash_partitions [],
-				char chip_sel[][GPMC_CS_NUM], int nand_type);
-#else
-static inline void board_flash_init(struct flash_partitions part[],
-				char chip_sel[][GPMC_CS_NUM], int nand_type)
-{
-}
-#endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern void board_nand_init(struct mtd_partition *nand_parts,
-		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
-extern struct gpmc_timings nand_default_timings[];
-#else
-static inline void board_nand_init(struct mtd_partition *nand_parts,
-		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
-{
-}
-#define	nand_default_timings	NULL
-#endif
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-extern void board_onenand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs);
-#else
-static inline void board_onenand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs)
-{
-}
-#endif
-- 
1.9.0

[RESEND PATCH 0/3] ARM: OMAP2+: Remove remaining unused legacy code

[Tony Lindgren]

* Javier Martinez Canillas <javier.martinez@collabora.co.uk> [140318 23:12]:
> Once OMAP2+ board files are removed, there is unused code that was only used
> by legacy platform code and can be removed.
> 
> This patch-set depends on the series:
> 
> [PATCH 00/12] Drop omap3 board files and make mach-omap2 boot in DT only mode [0]
> 
> and is composed of the following patches:
> 
> [RESEND PATCH 1/3] ARM: OMAP2+: Remove legacy smsc911x and smc91x
> [RESEND PATCH 2/3] ARM: OMAP2+: Remove unnecesary include in GPMC
> [RESEND PATCH 3/3] ARM: OMAP2+: Remove legacy board-flash.c
> 
> Tony,
> 
> I don't know what is your new schedule for board files removal but in case it is
> 3.16, I forward ported this patch-set on top of 3.14-rc7 and fixed some conflicts.

Thanks, I'll also rebase my changes in omap-for-v3.14/omap3-board-removal
at some point. Probably a good target is v3.16 if the DSS changes go
in. Then we just need displays enabled for omap3 and pandora supported
to drop the legacy data AFAIK.

Regards,

Tony
 
> [0]: http://marc.info/?t=138542504600001&r=1&w=2
>