[PATCH v3 10/19] arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable

[christoffer.dall@linaro.org (Christoffer Dall)]

On Mon, Nov 03, 2014 at 08:17:36PM +0000, Marc Zyngier wrote:
> Hi Christoffer,
> 
> On 03/11/14 20:04, Christoffer Dall wrote:
> > On Fri, Oct 31, 2014 at 05:26:45PM +0000, Andre Przywara wrote:
> >> ICC_SRE_EL1 is a system register allowing msr/mrs accesses to the
> >> GIC CPU interface for EL1 (guests). Currently we force it to 0, but
> >> for proper GICv3 support we have to allow guests to use it (depending
> >> on their selected virtual GIC model).
> >> So add ICC_SRE_EL1 to the list of saved/restored registers on a
> >> world switch, but actually disallow a guest to change it by only
> >> restoring a fixed, once-initialized value.
> >> This value depends on the GIC model userland has chosen for a guest.
> >>
> >> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> >> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
> >> ---
> >>  arch/arm64/kernel/asm-offsets.c |    1 +
> >>  arch/arm64/kvm/vgic-v3-switch.S |   14 +++++++++-----
> >>  include/kvm/arm_vgic.h          |    1 +
> >>  virt/kvm/arm/vgic-v3.c          |    9 +++++++--
> >>  4 files changed, 18 insertions(+), 7 deletions(-)
> >>
> >> diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
> >> index 9a9fce0..9d34486 100644
> >> --- a/arch/arm64/kernel/asm-offsets.c
> >> +++ b/arch/arm64/kernel/asm-offsets.c
> >> @@ -140,6 +140,7 @@ int main(void)
> >>    DEFINE(VGIC_V2_CPU_ELRSR,	offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr));
> >>    DEFINE(VGIC_V2_CPU_APR,	offsetof(struct vgic_cpu, vgic_v2.vgic_apr));
> >>    DEFINE(VGIC_V2_CPU_LR,	offsetof(struct vgic_cpu, vgic_v2.vgic_lr));
> >> +  DEFINE(VGIC_V3_CPU_SRE,	offsetof(struct vgic_cpu, vgic_v3.vgic_sre));
> >>    DEFINE(VGIC_V3_CPU_HCR,	offsetof(struct vgic_cpu, vgic_v3.vgic_hcr));
> >>    DEFINE(VGIC_V3_CPU_VMCR,	offsetof(struct vgic_cpu, vgic_v3.vgic_vmcr));
> >>    DEFINE(VGIC_V3_CPU_MISR,	offsetof(struct vgic_cpu, vgic_v3.vgic_misr));
> >> diff --git a/arch/arm64/kvm/vgic-v3-switch.S b/arch/arm64/kvm/vgic-v3-switch.S
> >> index d160469..617a012 100644
> >> --- a/arch/arm64/kvm/vgic-v3-switch.S
> >> +++ b/arch/arm64/kvm/vgic-v3-switch.S
> >> @@ -148,17 +148,18 @@
> >>   * x0: Register pointing to VCPU struct
> >>   */
> >>  .macro	restore_vgic_v3_state
> >> -	// Disable SRE_EL1 access. Necessary, otherwise
> >> -	// ICH_VMCR_EL2.VFIQEn becomes one, and FIQ happens...
> >> -	msr_s	ICC_SRE_EL1, xzr
> >> -	isb
> >> -
> > 
> > I know I reviewed this once, but now I'm forgetting how it works with
> > this comment above.  First, I don't fully understand the comment.
> 
> If you write to ICH_VMCR_EL2 with SRE==1, the architecture forces VFIQEn
> to 1, which causes interesting effects when you inject an Group0
> interrupt (as we do for GICv2 emulation).
> 
> You end-up spending days debugging this, mostly blaming the model for
> all these FIQs appearing in your guest, until you read that small gem
> hidden in the architecture spec. Bad memories, let's not go there.
> 
> That's why we must make sure to set ICC_SRE_EL1 *before* writing to
> ICH_VMCR_EL2.
> 
> > Second, now we're restoring a value that may potentially have SRE_EL1
> > access enabled, but FIQ doesn't happen.  Can you clarify this for me?
> 
> That's a side effect of how we inject interrupts with GICv3. They are
> Group1, always. A Group0 interrupt would definitely be delivered as a
> FIQ, but we currently don't offer a way to support that.
> 
Realized I never responded to this.

Thanks for the clarification, this must have been dreadful to debug.

-Christoffer