linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] arm/arm64: Enable Dirty Page logging for ARMv8 move log read, tlb flush to generic code
Date: Fri, 7 Nov 2014 21:20:41 +0100	[thread overview]
Message-ID: <20141107202041.GH22848@cbox> (raw)
In-Reply-To: <1412908447-28247-4-git-send-email-m.smarduch@samsung.com>

On Thu, Oct 09, 2014 at 07:34:07PM -0700, Mario Smarduch wrote:
> This patch enables ARMv8 dirty page logging and unifies ARMv7/ARMv8 code.
> 
> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com>
> ---
>  arch/arm/include/asm/kvm_host.h | 12 ------------
>  arch/arm/kvm/arm.c              |  9 ---------
>  arch/arm/kvm/mmu.c              | 17 +++++++++++------
>  arch/arm64/kvm/Kconfig          |  2 +-
>  4 files changed, 12 insertions(+), 28 deletions(-)
> 
> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
> index 12311a5..59565f5 100644
> --- a/arch/arm/include/asm/kvm_host.h
> +++ b/arch/arm/include/asm/kvm_host.h
> @@ -220,18 +220,6 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
>  	kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr);
>  }
>  
> -/**
> - * kvm_arch_flush_remote_tlbs() - flush all VM TLB entries
> - * @kvm:       pointer to kvm structure.
> - *
> - * Interface to HYP function to flush all VM TLB entries without address
> - * parameter.
> - */
> -static inline void kvm_arch_flush_remote_tlbs(struct kvm *kvm)
> -{
> -	kvm_call_hyp(__kvm_tlb_flush_vmid, kvm);
> -}
> -
>  static inline int kvm_arch_dev_ioctl_check_extension(long ext)
>  {
>  	return 0;
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 0546fa3..6a6fd6b 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -242,7 +242,6 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
>  				   const struct kvm_memory_slot *old,
>  				   enum kvm_mr_change change)
>  {
> -#ifdef CONFIG_ARM
>  	/*
>  	 * At this point memslot has been committed and there is an
>  	 * allocated dirty_bitmap[], dirty pages will be be tracked while the
> @@ -250,7 +249,6 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
>  	 */
>  	if ((change != KVM_MR_DELETE) && (mem->flags & KVM_MEM_LOG_DIRTY_PAGES))
>  		kvm_mmu_wp_memory_region(kvm, mem->slot);
> -#endif
>  }
>  
>  void kvm_arch_flush_shadow_all(struct kvm *kvm)
> @@ -783,13 +781,6 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
>  	}
>  }
>  
> -#ifdef CONFIG_ARM64
> -int kvm_arch_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
> -{
> -	return -EINVAL;
> -}
> -#endif
> -
>  static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm,
>  					struct kvm_arm_device_addr *dev_addr)
>  {
> diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
> index df1a5a3..8c0f9f2 100644
> --- a/arch/arm/kvm/mmu.c
> +++ b/arch/arm/kvm/mmu.c
> @@ -49,11 +49,18 @@ static phys_addr_t hyp_idmap_vector;
>  
>  static bool kvm_get_logging_state(struct kvm_memory_slot *memslot)
>  {
> -#ifdef CONFIG_ARM
>  	return !!memslot->dirty_bitmap;
> -#else
> -	return false;
> -#endif
> +}
> +
> +/**
> + * kvm_arch_flush_remote_tlbs() - flush all VM TLB entries for ARMv7/8
> + * @kvm:	pointer to kvm structure.
> + *
> + * Interface to HYP function to flush all VM TLB entries
> + */
> +inline void kvm_arch_flush_remote_tlbs(struct kvm *kvm)
> +{
> +	kvm_call_hyp(__kvm_tlb_flush_vmid, kvm);
>  }
>  
>  static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
> @@ -769,7 +776,6 @@ static bool transparent_hugepage_adjust(pfn_t *pfnp, phys_addr_t *ipap)
>  	return false;
>  }
>  
> -#ifdef CONFIG_ARM
>  /**
>   * stage2_wp_ptes - write protect PMD range
>   * @pmd:	pointer to pmd entry
> @@ -917,7 +923,6 @@ void kvm_mmu_write_protect_pt_masked(struct kvm *kvm,
>  
>  	stage2_wp_range(kvm, start, end);
>  }
> -#endif
>  
>  static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
>  			  struct kvm_memory_slot *memslot,
> diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
> index 40a8d19..a1a35809 100644
> --- a/arch/arm64/kvm/Kconfig
> +++ b/arch/arm64/kvm/Kconfig
> @@ -26,7 +26,7 @@ config KVM
>  	select KVM_ARM_HOST
>  	select KVM_ARM_VGIC
>  	select KVM_ARM_TIMER
> -	select HAVE_KVM_ARCH_DIRTY_LOG
> +	select HAVE_KVM_ARCH_TLB_FLUSH_ALL
>  	---help---
>  	  Support hosting virtualized guest machines.
>  
> -- 
> 1.9.1
> 

this patch needs to be rebased onto the newest version of your v7 patch,
but otherwise it looks roughly ok.

-Christoffer

  reply	other threads:[~2014-11-07 20:20 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-10  2:34 [PATCH 0/3] arm/arm64: Add dirty page logging for ARMv8 Mario Smarduch
2014-10-10  2:34 ` [PATCH 1/3] arm64: ARMv8 headers changes for dirty page logging Mario Smarduch
2014-11-07 20:20   ` Christoffer Dall
2014-11-07 20:49     ` Mario Smarduch
2014-10-10  2:34 ` [PATCH 2/3] arm64: Add HYP interface to flush VM Stage 1/2 TLB entires Mario Smarduch
2014-11-07 20:20   ` Christoffer Dall
2014-11-07 20:50     ` Mario Smarduch
2014-10-10  2:34 ` [PATCH 3/3] arm/arm64: Enable Dirty Page logging for ARMv8 move log read, tlb flush to generic code Mario Smarduch
2014-11-07 20:20   ` Christoffer Dall [this message]
2014-11-07 20:51     ` Mario Smarduch
2014-11-19 14:39       ` Christoffer Dall
2014-11-19 20:15         ` Mario Smarduch
2014-11-21 10:09           ` Christoffer Dall
2014-11-22  0:42             ` Mario Smarduch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141107202041.GH22848@cbox \
    --to=christoffer.dall@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).