From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Mon, 10 Nov 2014 10:50:41 +0000 Subject: [PATCH 01/13] ARM: STi: DT: STiH416: Add pinctl setup for usb controllers. In-Reply-To: <1415361475-6218-2-git-send-email-peter.griffin@linaro.org> References: <1415361475-6218-1-git-send-email-peter.griffin@linaro.org> <1415361475-6218-2-git-send-email-peter.griffin@linaro.org> Message-ID: <20141110105041.GU21424@x1> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, 07 Nov 2014, Peter Griffin wrote: > This patch adds the required pin config for all usb controllers > on the stih416. > > Signed-off-by: Peter Griffin > --- > arch/arm/boot/dts/stih416-pinctrl.dtsi | 34 ++++++++++++++++++++++++++++++++++ > 1 file changed, 34 insertions(+) Acked-by: Lee Jones > diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi > index c2025bc..9cccf2d 100644 > --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi > +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi > @@ -147,6 +147,15 @@ > }; > }; > > + usb { > + pinctrl_usb3: usb3 { > + st,pins { > + oc-detect = <&pio40 0 ALT1 IN>; > + pwr-enable = <&pio40 1 ALT1 OUT>; > + }; > + }; > + }; > + > sbc_i2c1 { > pinctrl_sbc_i2c1_default: sbc_i2c1-default { > st,pins { > @@ -318,6 +327,16 @@ > }; > }; > > + usb { > + pinctrl_usb0: usb0 { > + st,pins { > + oc-detect = <&pio9 4 ALT1 IN>; > + pwr-enable = <&pio9 5 ALT1 OUT>; > + }; > + }; > + }; > + > + > i2c1 { > pinctrl_i2c1_default: i2c1-default { > st,pins { > @@ -506,6 +525,21 @@ > }; > }; > }; > + > + usb { > + pinctrl_usb1: usb1 { > + st,pins { > + oc-detect = <&pio18 0 ALT1 IN>; > + pwr-enable = <&pio18 1 ALT1 OUT>; > + }; > + }; > + pinctrl_usb2: usb2 { > + st,pins { > + oc-detect = <&pio18 2 ALT1 IN>; > + pwr-enable = <&pio18 3 ALT1 OUT>; > + }; > + }; > + }; > }; > > pin-controller-fvdp-fe { -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog