From mboxrd@z Thu Jan 1 00:00:00 1970 From: tony@atomide.com (Tony Lindgren) Date: Mon, 10 Nov 2014 15:11:32 -0800 Subject: [PATCH 2/2] arm: boot: dts: am4372: enable dwc3 suspend PHY quirk In-Reply-To: <1415295366-593-2-git-send-email-balbi@ti.com> References: <1415295366-593-1-git-send-email-balbi@ti.com> <1415295366-593-2-git-send-email-balbi@ti.com> Message-ID: <20141110231132.GA31454@atomide.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org * Felipe Balbi [141106 09:40]: > Whenever Suspend PHY bit is set on AM437x devices, > USB will not work due to Set EP Configuration command > always failing. > > This was only found after a recent commit 2164a47 (usb: > dwc3: set SUSPHY bit for all cores, which will be merged > for v3.19) added a missing *required* step to dwc3 > initialization. Synopsys Databook requires that we enable > Suspend PHY bit after initialization but that, unfortunately, > breaks AM437x. > > Signed-off-by: Felipe Balbi This should be safe to queue along with the related USB changes: Acked-by: Tony Lindgren > --- > arch/arm/boot/dts/am4372.dtsi | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi > index 46660ff..e19068d 100644 > --- a/arch/arm/boot/dts/am4372.dtsi > +++ b/arch/arm/boot/dts/am4372.dtsi > @@ -817,6 +817,8 @@ > maximum-speed = "high-speed"; > dr_mode = "otg"; > status = "disabled"; > + snps,dis_u3_susphy_quirk; > + snps,dis_u2_susphy_quirk; > }; > }; > > @@ -839,6 +841,8 @@ > maximum-speed = "high-speed"; > dr_mode = "otg"; > status = "disabled"; > + snps,dis_u3_susphy_quirk; > + snps,dis_u2_susphy_quirk; > }; > }; > > -- > 2.1.0.GIT > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >