From mboxrd@z Thu Jan 1 00:00:00 1970 From: sre@kernel.org (Sebastian Reichel) Date: Fri, 14 Nov 2014 17:53:24 +0100 Subject: N900 modem support in 3.18-rc1 In-Reply-To: <20141114073756.GA5336@amd> References: <201411052137.31452@pali> <20141105203918.GA29199@amd> <201411052206.05379@pali> <20141105220359.GA32052@amd> <20141105234555.GA7097@earth.universe> <20141106124711.GA26944@amd> <20141106180335.GA21513@earth.universe> <20141113162155.GA8512@xo-6d-61-c0.localdomain> <20141113174534.GO26481@atomide.com> <20141114073756.GA5336@amd> Message-ID: <20141114165324.GA12250@earth.universe> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Nov 14, 2014 at 08:37:56AM +0100, Pavel Machek wrote: > I'm using nfsroot (no modules), .config is attached. Debian v7.7, > ofono installed. > > To launch ofono, I'm using: > > rmdir /dev/cmt > ln -s /sys/bus/hsi/devices/n900-modem/ /dev/cmt At least with Debian as base you can add this to your /etc/rc.local and be happy, since the link will be created before ofono starts via /etc/init.d/ ;) I did not send ofono guys a patch to use /sys/bus/hsi/devices/n900-modem/, since the kernel is supposed to handle the PM, so there will be another, simpler interface (I plan to use pm=2 for that). > killall ofonod > sleep .1 > ofonod --nodetach --debug & or just use "/etc/init.d/ofono restart". The above is mostly useful for getting debug output from ofono. > [...] The short description for .config: CONFIG_NOKIA_MODEM must not be disabled. It should depend on everything else needed: CONFIG_PHONET CONFIG_HSI CONFIG_OMAP_SSI CONFIG_OMAP_SSI_PORT CONFIG_SSI_PROTOCOL CONFIG_NOKIA_MODEM -- Sebastian -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: