public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 4/4] dt-bindings: add bindings for mediatek sysirq
Date: Wed, 19 Nov 2014 18:07:25 +0000	[thread overview]
Message-ID: <20141119180724.GE12851@leverpostej> (raw)
In-Reply-To: <1416406451-4578-5-git-send-email-yingjoe.chen@mediatek.com>

On Wed, Nov 19, 2014 at 02:14:11PM +0000, Yingjoe Chen wrote:
> Add binding documentation for Mediatek SoC SYSIRQ.
> 
> Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
> ---
>  .../bindings/arm/mediatek/mediatek,sysirq.txt      | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
> new file mode 100644
> index 0000000..8669536
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
> @@ -0,0 +1,26 @@
> +Mediatek 65xx/81xx sysirq
> +
> +Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI
> +interrupt.
> +
> +Required properties:
> +- compatible: should be one of:
> +	"mediatek,mt8135-sysirq"
> +	"mediatek,mt8127-sysirq"
> +	"mediatek,mt6589-sysirq"
> +	"mediatek,mt6582-sysirq"
> +	"mediatek,mt6577-sysirq"
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- #interrupt-cells : Must use the same cells/format as parent controller.
> +- interrupt-parent: phandle of irq domain parent for sysirq.

I'm concerned that this sounds very general while the binding assumes
the GICv2 interrupt-specifier format. Either the driver needs to become
more general, or this needs to be tightened up.

It's also odd to say "irq domain parent", as that's purely a Linux
construct and has nothing to do with the HW.

Thanks,
Mark.

> +- reg: Physical base address of the intpol registers and length of memory
> +  mapped region.
> +
> +Example:
> +	sysirq: interrupt-controller at 10200100 {
> +		compatible = "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq";
> +		interrupt-controller;
> +		#interrupt-cells = <3>;
> +		interrupt-parent = <&gic>;
> +		reg = <0 0x10200100 0 0x1c>;
> +	};
> -- 
> 1.8.1.1.dirty
> 
> 

  reply	other threads:[~2014-11-19 18:07 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-19 14:14 [PATCH v7 0/4] ARM: mediatek: Add support for interrupt polarity Yingjoe Chen
2014-11-19 14:14 ` [PATCH v7 1/4] irqchip: gic: Support hierarchy irq domain Yingjoe Chen
2014-11-19 17:18   ` Marc Zyngier
2014-11-20  3:57     ` Yingjoe Chen
2014-11-20  9:41       ` Yingjoe Chen
2014-11-20 10:29         ` Marc Zyngier
2014-11-20  4:26     ` Jiang Liu
2014-11-20 10:07       ` Marc Zyngier
2014-11-21 15:51         ` Yingjoe Chen
2014-11-24 19:31           ` Marc Zyngier
2014-11-19 14:14 ` [PATCH v7 2/4] ARM: mediatek: Add sysirq interrupt polarity support Yingjoe Chen
2014-11-19 18:04   ` Mark Rutland
2014-11-21 15:36     ` Yingjoe Chen
2014-11-19 14:14 ` [PATCH v7 3/4] ARM: mediatek: Add sysirq in mt6589/mt8135/mt8127 dtsi Yingjoe Chen
2014-11-19 17:49   ` Marc Zyngier
2014-11-20  3:29     ` Yingjoe Chen
2014-11-19 14:14 ` [PATCH v7 4/4] dt-bindings: add bindings for mediatek sysirq Yingjoe Chen
2014-11-19 18:07   ` Mark Rutland [this message]
2014-11-24 15:14     ` Yingjoe Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141119180724.GE12851@leverpostej \
    --to=mark.rutland@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox