linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/9] clk: sunxi: Give sunxi_factors_register a registers parameter
Date: Fri, 21 Nov 2014 12:15:03 +0100	[thread overview]
Message-ID: <20141121111503.GC4752@lukather> (raw)
In-Reply-To: <546EFB83.1020806@redhat.com>

On Fri, Nov 21, 2014 at 09:44:51AM +0100, Hans de Goede wrote:
> Hi,
> 
> On 11/21/2014 09:35 AM, Maxime Ripard wrote:
> > Hi Hans,
> > 
> > On Thu, Nov 20, 2014 at 04:55:20PM +0100, Hans de Goede wrote:
> >> Before this commit sunxi_factors_register uses of_iomap(node, 0) to get
> >> the clk registers. The sun6i prcm has factor clocks, for which we want to
> >> use sunxi_factors_register, but of_iomap(node, 0) does not work for the prcm
> >> factor clocks, because the prcm uses the mfd framework, so the registers
> >> are not part of the dt-node, instead they are added to the platform_device,
> >> as platform_device resources.
> >>
> >> This commit makes getting the registers the callers duty, so that
> >> sunxi_factors_register can be used with mfd instantiated platform device too.
> >>
> >> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> > 
> > Funny, I was thinking of doing exactly the same thing for MMC clocks :)
> > 
> >> ---
> >>  drivers/clk/sunxi/clk-factors.c    | 10 ++++------
> >>  drivers/clk/sunxi/clk-factors.h    |  7 ++++---
> >>  drivers/clk/sunxi/clk-mod0.c       |  6 ++++--
> >>  drivers/clk/sunxi/clk-sun8i-mbus.c |  2 +-
> >>  drivers/clk/sunxi/clk-sunxi.c      |  3 ++-
> >>  5 files changed, 15 insertions(+), 13 deletions(-)
> >>
> >> diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
> >> index f83ba09..fc4f4b5 100644
> >> --- a/drivers/clk/sunxi/clk-factors.c
> >> +++ b/drivers/clk/sunxi/clk-factors.c
> >> @@ -156,9 +156,10 @@ static const struct clk_ops clk_factors_ops = {
> >>  	.set_rate = clk_factors_set_rate,
> >>  };
> >>  
> >> -struct clk * __init sunxi_factors_register(struct device_node *node,
> >> -					   const struct factors_data *data,
> >> -					   spinlock_t *lock)
> >> +struct clk *sunxi_factors_register(struct device_node *node,
> >> +				   const struct factors_data *data,
> >> +				   spinlock_t *lock,
> >> +				   void __iomem *reg)
> >>  {
> >>  	struct clk *clk;
> >>  	struct clk_factors *factors;
> >> @@ -168,11 +169,8 @@ struct clk * __init sunxi_factors_register(struct device_node *node,
> >>  	struct clk_hw *mux_hw = NULL;
> >>  	const char *clk_name = node->name;
> >>  	const char *parents[FACTORS_MAX_PARENTS];
> >> -	void __iomem *reg;
> >>  	int i = 0;
> >>  
> >> -	reg = of_iomap(node, 0);
> >> -
> >>  	/* if we have a mux, we will have >1 parents */
> >>  	while (i < FACTORS_MAX_PARENTS &&
> >>  	       (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
> >> diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h
> >> index 9913840..1f5526d 100644
> >> --- a/drivers/clk/sunxi/clk-factors.h
> >> +++ b/drivers/clk/sunxi/clk-factors.h
> >> @@ -37,8 +37,9 @@ struct clk_factors {
> >>  	spinlock_t *lock;
> >>  };
> >>  
> >> -struct clk * __init sunxi_factors_register(struct device_node *node,
> >> -					   const struct factors_data *data,
> >> -					   spinlock_t *lock);
> >> +struct clk *sunxi_factors_register(struct device_node *node,
> >> +				   const struct factors_data *data,
> >> +				   spinlock_t *lock,
> >> +				   void __iomem *reg);
> > 
> > Why are you dropping the __init there?
> 
> Because it is going to be used from mfd instantiation, so from a platform_dev
> probe function which is not __init.

Ah right. Mentionning it in the commit log would be nice.

> 
> > 
> >>  
> >>  #endif
> >> diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c
> >> index 4a56385..9530833 100644
> >> --- a/drivers/clk/sunxi/clk-mod0.c
> >> +++ b/drivers/clk/sunxi/clk-mod0.c
> >> @@ -78,7 +78,8 @@ static DEFINE_SPINLOCK(sun4i_a10_mod0_lock);
> >>  
> >>  static void __init sun4i_a10_mod0_setup(struct device_node *node)
> >>  {
> >> -	sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun4i_a10_mod0_lock);
> >> +	sunxi_factors_register(node, &sun4i_a10_mod0_data,
> >> +			       &sun4i_a10_mod0_lock, of_iomap(node, 0));
> > 
> > As of_iomap can fail, I'd rather check the returned value before
> > calling sunxi_factors_register.
> > 
> > I know it wasn't done before, but it's the right thing to do, as it
> > would lead to an instant crash if that fails.
> 
> Ok, I'll wait for you to review the rest of the series and then do a v2 of the
> patch-set with this fixed (as time permits).

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141121/157b6862/attachment.sig>

  reply	other threads:[~2014-11-21 11:15 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-20 15:55 [PATCH 0/9] sun6i / A31 ir receiver support Hans de Goede
2014-11-20 15:55 ` [PATCH 1/9] clk: sunxi: Give sunxi_factors_register a registers parameter Hans de Goede
2014-11-21  8:35   ` Maxime Ripard
2014-11-21  8:44     ` Hans de Goede
2014-11-21 11:15       ` Maxime Ripard [this message]
2014-11-20 15:55 ` [PATCH 2/9] clk: sunxi: Make sun4i_a10_mod0_data available outside of clk-mod0.c Hans de Goede
2014-11-20 15:55 ` [PATCH 3/9] clk: sunxi: Add prcm mod0 clock driver Hans de Goede
2014-11-20 18:24   ` [linux-sunxi] " Chen-Yu Tsai
2014-11-20 19:32     ` Hans de Goede
2014-11-21  8:49   ` Maxime Ripard
2014-11-21  9:13     ` Hans de Goede
2014-11-24 22:03       ` Maxime Ripard
2014-11-25  8:29         ` Hans de Goede
2014-11-25  8:37           ` Hans de Goede
2014-11-26 21:13           ` Maxime Ripard
2014-11-27  8:41             ` Hans de Goede
2014-11-27  9:28               ` Chen-Yu Tsai
2014-11-27 10:10                 ` Hans de Goede
2014-11-27 19:05                   ` Maxime Ripard
2014-11-28 13:37                     ` Hans de Goede
2014-12-02 15:45                       ` Maxime Ripard
2014-12-03  9:49                         ` Hans de Goede
2014-12-07 18:08                           ` Maxime Ripard
2014-12-08  8:19                             ` Hans de Goede
2014-12-09  8:51                               ` Maxime Ripard
2014-11-27 18:51               ` Maxime Ripard
2014-11-27 16:40             ` Boris Brezillon
2014-11-27 19:15               ` Maxime Ripard
2014-11-20 15:55 ` [PATCH 4/9] rc: sunxi-cir: Add support for an optional reset controller Hans de Goede
2014-11-20 16:28   ` Mauro Carvalho Chehab
2014-11-21  8:51     ` Maxime Ripard
2014-11-20 23:05   ` [linux-sunxi] " Julian Calaby
2014-11-20 15:55 ` [PATCH 5/9] rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i Hans de Goede
2014-11-20 16:28   ` Mauro Carvalho Chehab
2014-11-21  8:26     ` Maxime Ripard
2014-11-21  8:42       ` Hans de Goede
2014-11-21  9:59         ` Maxime Ripard
2014-11-21 10:13           ` Hans de Goede
2014-11-23 15:47             ` Maxime Ripard
2014-11-20 15:55 ` [PATCH 6/9] ARM: dts: sun6i: Add ir_clk node Hans de Goede
2014-11-20 15:55 ` [PATCH 7/9] ARM: dts: sun6i: Add ir node Hans de Goede
2014-11-20 15:55 ` [PATCH 8/9] ARM: dts: sun6i: Add pinmux settings for the ir pins Hans de Goede
2014-11-20 15:55 ` [PATCH 9/9] ARM: dts: sun6i: Enable ir receiver on the Mele M9 Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20141121111503.GC4752@lukather \
    --to=maxime.ripard@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).