From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 01/19] arm/arm64: KVM: rework MPIDR assignment and add accessors
Date: Sun, 23 Nov 2014 10:34:51 +0100 [thread overview]
Message-ID: <20141123093451.GT3401@cbox> (raw)
In-Reply-To: <1415959683-26027-2-git-send-email-andre.przywara@arm.com>
On Fri, Nov 14, 2014 at 10:07:45AM +0000, Andre Przywara wrote:
> The virtual MPIDR registers (containing topology information) for the
> guest are currently mapped linearily to the vcpu_id. Improve this
> mapping for arm64 by using three levels to not artificially limit the
> number of vCPUs.
> To help this, change and rename the kvm_vcpu_get_mpidr() function to
> mask off the non-affinity bits in the MPIDR register.
> Also add an accessor to later allow easier access to a vCPU with a
> given MPIDR. Use this new accessor in the PSCI emulation.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> Changelog v3...v4:
> - rename kvm_vcpu_get_mpidr() to kvm_vcpu_get_mpidr_aff()
> - simplify kvm_mpidr_to_vcpu()
> - fixup comment
>
> arch/arm/include/asm/kvm_emulate.h | 5 +++--
> arch/arm/include/asm/kvm_host.h | 2 ++
> arch/arm/kvm/arm.c | 13 +++++++++++++
> arch/arm/kvm/psci.c | 17 +++++------------
> arch/arm64/include/asm/kvm_emulate.h | 5 +++--
> arch/arm64/include/asm/kvm_host.h | 2 ++
> arch/arm64/kvm/sys_regs.c | 11 +++++++++--
> 7 files changed, 37 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h
> index b9db269..3ae88ac 100644
> --- a/arch/arm/include/asm/kvm_emulate.h
> +++ b/arch/arm/include/asm/kvm_emulate.h
> @@ -23,6 +23,7 @@
> #include <asm/kvm_asm.h>
> #include <asm/kvm_mmio.h>
> #include <asm/kvm_arm.h>
> +#include <asm/cputype.h>
>
> unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num);
> unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu);
> @@ -162,9 +163,9 @@ static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu)
> return kvm_vcpu_get_hsr(vcpu) & HSR_HVC_IMM_MASK;
> }
>
> -static inline unsigned long kvm_vcpu_get_mpidr(struct kvm_vcpu *vcpu)
> +static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu)
> {
> - return vcpu->arch.cp15[c0_MPIDR];
> + return vcpu->arch.cp15[c0_MPIDR] & MPIDR_HWID_BITMASK;
> }
>
> static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
> diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
> index 53036e2..b443dfe 100644
> --- a/arch/arm/include/asm/kvm_host.h
> +++ b/arch/arm/include/asm/kvm_host.h
> @@ -236,6 +236,8 @@ static inline void vgic_arch_setup(const struct vgic_params *vgic)
> int kvm_perf_init(void);
> int kvm_perf_teardown(void);
>
> +struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
> +
> static inline void kvm_arch_hardware_disable(void) {}
> static inline void kvm_arch_hardware_unsetup(void) {}
> static inline void kvm_arch_sync_events(struct kvm *kvm) {}
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 9e193c8..c2a5c69 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -977,6 +977,19 @@ static void check_kvm_target_cpu(void *ret)
> *(int *)ret = kvm_target_cpu();
> }
>
> +struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr)
> +{
> + struct kvm_vcpu *vcpu;
> + int i;
> +
> + mpidr &= MPIDR_HWID_BITMASK;
> + kvm_for_each_vcpu(i, vcpu, kvm) {
> + if (mpidr == kvm_vcpu_get_mpidr_aff(vcpu))
> + return vcpu;
> + }
> + return NULL;
> +}
> +
> /**
> * Initialize Hyp-mode and memory mappings on all CPUs.
> */
> diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c
> index 09cf377..84121b2 100644
> --- a/arch/arm/kvm/psci.c
> +++ b/arch/arm/kvm/psci.c
> @@ -21,6 +21,7 @@
> #include <asm/cputype.h>
> #include <asm/kvm_emulate.h>
> #include <asm/kvm_psci.h>
> +#include <asm/kvm_host.h>
>
> /*
> * This is an implementation of the Power State Coordination Interface
> @@ -65,25 +66,17 @@ static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
> static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
> {
> struct kvm *kvm = source_vcpu->kvm;
> - struct kvm_vcpu *vcpu = NULL, *tmp;
> + struct kvm_vcpu *vcpu = NULL;
> wait_queue_head_t *wq;
> unsigned long cpu_id;
> unsigned long context_id;
> - unsigned long mpidr;
> phys_addr_t target_pc;
> - int i;
>
> - cpu_id = *vcpu_reg(source_vcpu, 1);
> + cpu_id = *vcpu_reg(source_vcpu, 1) & MPIDR_HWID_BITMASK;
> if (vcpu_mode_is_32bit(source_vcpu))
> cpu_id &= ~((u32) 0);
>
> - kvm_for_each_vcpu(i, tmp, kvm) {
> - mpidr = kvm_vcpu_get_mpidr(tmp);
> - if ((mpidr & MPIDR_HWID_BITMASK) == (cpu_id & MPIDR_HWID_BITMASK)) {
> - vcpu = tmp;
> - break;
> - }
> - }
> + vcpu = kvm_mpidr_to_vcpu(kvm, cpu_id);
>
> /*
> * Make sure the caller requested a valid CPU and that the CPU is
> @@ -154,7 +147,7 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
> * then ON else OFF
> */
> kvm_for_each_vcpu(i, tmp, kvm) {
> - mpidr = kvm_vcpu_get_mpidr(tmp);
> + mpidr = kvm_vcpu_get_mpidr_aff(tmp);
> if (((mpidr & target_affinity_mask) == target_affinity) &&
> !tmp->arch.pause) {
> return PSCI_0_2_AFFINITY_LEVEL_ON;
> diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> index 5674a55..d4daaa5 100644
> --- a/arch/arm64/include/asm/kvm_emulate.h
> +++ b/arch/arm64/include/asm/kvm_emulate.h
> @@ -27,6 +27,7 @@
> #include <asm/kvm_arm.h>
> #include <asm/kvm_mmio.h>
> #include <asm/ptrace.h>
> +#include <asm/cputype.h>
>
> unsigned long *vcpu_reg32(const struct kvm_vcpu *vcpu, u8 reg_num);
> unsigned long *vcpu_spsr32(const struct kvm_vcpu *vcpu);
> @@ -182,9 +183,9 @@ static inline u8 kvm_vcpu_trap_get_fault_type(const struct kvm_vcpu *vcpu)
> return kvm_vcpu_get_hsr(vcpu) & ESR_EL2_FSC_TYPE;
> }
>
> -static inline unsigned long kvm_vcpu_get_mpidr(struct kvm_vcpu *vcpu)
> +static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu)
> {
> - return vcpu_sys_reg(vcpu, MPIDR_EL1);
> + return vcpu_sys_reg(vcpu, MPIDR_EL1) & MPIDR_HWID_BITMASK;
> }
>
> static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index 2012c4b..286bb61 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -207,6 +207,8 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
> int kvm_perf_init(void);
> int kvm_perf_teardown(void);
>
> +struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
> +
> static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
> phys_addr_t pgd_ptr,
> unsigned long hyp_stack_ptr,
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index 4cc3b71..fd3ffc3 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -252,10 +252,17 @@ static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
>
> static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
> {
> + u64 mpidr;
> +
> /*
> - * Simply map the vcpu_id into the Aff0 field of the MPIDR.
> + * Map the vcpu_id into the first three Aff fields of the MPIDR.
> + * We limit the number of VCPUs in Aff0 due to a limitation in the
> + * ICC_SGIxR registers of the GICv3.
> */
> - vcpu_sys_reg(vcpu, MPIDR_EL1) = (1UL << 31) | (vcpu->vcpu_id & 0xff);
> + mpidr = (vcpu->vcpu_id & 0x0f) << MPIDR_LEVEL_SHIFT(0);
> + mpidr |= ((vcpu->vcpu_id >> 4) & 0xff) << MPIDR_LEVEL_SHIFT(1);
> + mpidr |= ((vcpu->vcpu_id >> 12) & 0xff) << MPIDR_LEVEL_SHIFT(2);
> + vcpu_sys_reg(vcpu, MPIDR_EL1) = (1ULL << 31) | mpidr;
> }
>
> /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
> --
> 1.7.9.5
>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
next prev parent reply other threads:[~2014-11-23 9:34 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-14 10:07 [PATCH v4 00/19] KVM GICv3 emulation Andre Przywara
2014-11-14 10:07 ` [PATCH v4 01/19] arm/arm64: KVM: rework MPIDR assignment and add accessors Andre Przywara
2014-11-18 10:35 ` Eric Auger
2014-11-23 9:34 ` Christoffer Dall [this message]
2014-11-14 10:07 ` [PATCH v4 02/19] arm/arm64: KVM: pass down user space provided GIC type into vGIC code Andre Przywara
2014-11-18 10:36 ` Eric Auger
2014-11-14 10:07 ` [PATCH v4 03/19] arm/arm64: KVM: refactor vgic_handle_mmio() function Andre Przywara
2014-11-18 10:35 ` Eric Auger
2014-11-14 10:07 ` [PATCH v4 04/19] arm/arm64: KVM: wrap 64 bit MMIO accesses with two 32 bit ones Andre Przywara
2014-11-18 10:36 ` Eric Auger
2014-11-23 9:42 ` Christoffer Dall
2014-11-24 13:50 ` Andre Przywara
2014-11-24 14:40 ` Christoffer Dall
2014-11-14 10:07 ` [PATCH v4 05/19] arm/arm64: KVM: introduce per-VM ops Andre Przywara
2014-11-23 9:58 ` Christoffer Dall
2014-11-14 10:07 ` [PATCH v4 06/19] arm/arm64: KVM: move kvm_register_device_ops() into vGIC probing Andre Przywara
2014-11-18 10:43 ` Eric Auger
2014-11-18 10:58 ` Eric Auger
2014-11-18 11:03 ` Andre Przywara
2014-11-14 10:07 ` [PATCH v4 07/19] arm/arm64: KVM: dont rely on a valid GICH base address Andre Przywara
2014-11-14 10:07 ` [PATCH v4 08/19] arm/arm64: KVM: make the maximum number of vCPUs a per-VM value Andre Przywara
2014-11-23 13:21 ` Christoffer Dall
2014-12-08 14:10 ` Andre Przywara
2014-11-14 10:07 ` [PATCH v4 09/19] arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable Andre Przywara
2014-11-14 10:07 ` [PATCH v4 10/19] arm/arm64: KVM: refactor MMIO accessors Andre Przywara
2014-11-14 10:07 ` [PATCH v4 11/19] arm/arm64: KVM: refactor/wrap vgic_set/get_attr() Andre Przywara
2014-11-23 13:27 ` Christoffer Dall
2014-11-14 10:07 ` [PATCH v4 12/19] arm/arm64: KVM: add vgic.h header file Andre Przywara
2014-11-18 14:07 ` Eric Auger
2014-11-18 15:24 ` Andre Przywara
2014-11-23 13:29 ` Christoffer Dall
2014-11-14 10:07 ` [PATCH v4 13/19] arm/arm64: KVM: split GICv2 specific emulation code from vgic.c Andre Przywara
2014-11-23 13:32 ` Christoffer Dall
2014-11-14 10:07 ` [PATCH v4 14/19] arm/arm64: KVM: add opaque private pointer to MMIO data Andre Przywara
2014-11-23 13:33 ` Christoffer Dall
2014-11-14 10:07 ` [PATCH v4 15/19] arm/arm64: KVM: add virtual GICv3 distributor emulation Andre Przywara
2014-11-14 11:07 ` Christoffer Dall
2014-11-17 13:58 ` Andre Przywara
2014-11-17 23:46 ` Christoffer Dall
2014-11-18 15:57 ` Eric Auger
2014-11-23 14:38 ` Christoffer Dall
2014-11-24 16:00 ` Andre Przywara
2014-11-25 10:41 ` Christoffer Dall
2014-11-28 15:24 ` Andre Przywara
2014-11-30 8:30 ` Christoffer Dall
2014-12-02 16:24 ` Andre Przywara
2014-12-02 17:06 ` Marc Zyngier
2014-12-02 17:32 ` Andre Przywara
2014-12-03 10:30 ` Christoffer Dall
2014-12-03 10:47 ` Andre Przywara
2014-12-03 11:06 ` Christoffer Dall
2014-12-03 10:29 ` Christoffer Dall
2014-12-03 10:44 ` Marc Zyngier
2014-12-03 11:07 ` Christoffer Dall
2014-12-03 10:28 ` Christoffer Dall
2014-12-03 11:10 ` Andre Przywara
2014-12-03 11:28 ` Arnd Bergmann
2014-12-03 11:39 ` Peter Maydell
2014-12-03 12:03 ` Andre Przywara
2014-12-03 13:14 ` Arnd Bergmann
2014-12-04 9:34 ` Christoffer Dall
2014-12-04 10:02 ` Eric Auger
2014-11-14 10:08 ` [PATCH v4 16/19] arm64: GICv3: introduce symbolic names for GICv3 ICC_SGI1R_EL1 fields Andre Przywara
2014-11-23 14:43 ` Christoffer Dall
2014-11-14 10:08 ` [PATCH v4 17/19] arm64: KVM: add SGI generation register emulation Andre Przywara
2014-11-23 15:08 ` Christoffer Dall
2014-11-24 16:37 ` Andre Przywara
2014-11-25 11:03 ` Christoffer Dall
2014-11-28 15:40 ` Andre Przywara
2014-11-30 8:45 ` Christoffer Dall
2014-12-03 17:50 ` Andre Przywara
2014-12-03 20:22 ` Christoffer Dall
2014-11-14 10:08 ` [PATCH v4 18/19] arm/arm64: KVM: enable kernel side of GICv3 emulation Andre Przywara
2014-11-24 9:09 ` Christoffer Dall
2014-11-24 17:41 ` Andre Przywara
2014-11-25 11:08 ` Christoffer Dall
2014-11-14 10:08 ` [PATCH v4 19/19] arm/arm64: KVM: allow userland to request a virtual GICv3 Andre Przywara
2014-11-24 9:39 ` Christoffer Dall
2014-11-24 9:33 ` [PATCH v4 00/19] KVM GICv3 emulation Eric Auger
2014-11-24 17:46 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141123093451.GT3401@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).