* [GIT PULL] Allwinner SimpleFB support for 3.19
@ 2014-11-23 16:35 Maxime Ripard
2014-11-28 14:05 ` Arnd Bergmann
0 siblings, 1 reply; 3+ messages in thread
From: Maxime Ripard @ 2014-11-23 16:35 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd, Kevin, Olof,
Please pull the following patches that enable simplefb on most of the
Allwinner SoCs, allowing to finaly be able to have support for a video
display using simplefb as a temp solution.
Thanks,
Maxime
The following changes since commit 109588fd214c930ce6561997250f0eea456a8f7b:
ARM: dts: sun6i: Add ethernet support to M9 board (2014-11-23 17:00:25 +0100)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git sunxi-simplefb-for-3.19
for you to fetch changes up to a9f8cda32a3acc3150755fe973f7fa1867a7a5d6:
ARM: dts: sunxi: Update simplefb nodes so that u-boot can find them (2014-11-23 17:21:52 +0100)
----------------------------------------------------------------
Allwinner simple frambuffer support
This enables the simple framebuffer on all the supported Allwinner SoCs (but
the A80). That allows to have at last a video display usable by using the
framebuffer the firmware might have set up.
----------------------------------------------------------------
Hans de Goede (6):
ARM: dts: sun4i: Add simplefb node
ARM: dts: sun5i: Add simplefb node
ARM: dts: sun6i: Add simplefb node
ARM: dts: sun7i: Add simplefb node
ARM: dts: sunxi: Add de_be0 clk parent pll to simplefb node
ARM: dts: sunxi: Update simplefb nodes so that u-boot can find them
arch/arm/boot/dts/sun4i-a10.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/sun5i-a10s.dtsi | 14 ++++++++++++++
arch/arm/boot/dts/sun6i-a31.dtsi | 12 ++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++
4 files changed, 54 insertions(+)
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141123/84e5783b/attachment-0001.sig>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [GIT PULL] Allwinner SimpleFB support for 3.19
2014-11-23 16:35 [GIT PULL] Allwinner SimpleFB support for 3.19 Maxime Ripard
@ 2014-11-28 14:05 ` Arnd Bergmann
2014-12-01 16:38 ` Maxime Ripard
0 siblings, 1 reply; 3+ messages in thread
From: Arnd Bergmann @ 2014-11-28 14:05 UTC (permalink / raw)
To: linux-arm-kernel
On Sunday 23 November 2014, Maxime Ripard wrote:
> Hi Arnd, Kevin, Olof,
>
> Please pull the following patches that enable simplefb on most of the
> Allwinner SoCs, allowing to finaly be able to have support for a video
> display using simplefb as a temp solution.
>
> Thanks,
> Maxime
>
> The following changes since commit 109588fd214c930ce6561997250f0eea456a8f7b:
>
> ARM: dts: sun6i: Add ethernet support to M9 board (2014-11-23 17:00:25 +0100)
>
> are available in the git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git sunxi-simplefb-for-3.19
>
> for you to fetch changes up to a9f8cda32a3acc3150755fe973f7fa1867a7a5d6:
>
> ARM: dts: sunxi: Update simplefb nodes so that u-boot can find them (2014-11-23 17:21:52 +0100)
>
> ----------------------------------------------------------------
> Allwinner simple frambuffer support
>
> This enables the simple framebuffer on all the supported Allwinner SoCs (but
> the A80). That allows to have at last a video display usable by using the
> framebuffer the firmware might have set up.
>
Pulled into next/dt. I'm glad you finally reached a consensus on this. I
never followed the discussion but saw the hundreds of mails fly by on the
topic.
Arnd
^ permalink raw reply [flat|nested] 3+ messages in thread
* [GIT PULL] Allwinner SimpleFB support for 3.19
2014-11-28 14:05 ` Arnd Bergmann
@ 2014-12-01 16:38 ` Maxime Ripard
0 siblings, 0 replies; 3+ messages in thread
From: Maxime Ripard @ 2014-12-01 16:38 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Fri, Nov 28, 2014 at 03:05:58PM +0100, Arnd Bergmann wrote:
> On Sunday 23 November 2014, Maxime Ripard wrote:
> > Allwinner simple frambuffer support
> >
> > This enables the simple framebuffer on all the supported Allwinner SoCs (but
> > the A80). That allows to have at last a video display usable by using the
> > framebuffer the firmware might have set up.
> >
>
> Pulled into next/dt. I'm glad you finally reached a consensus on this. I
> never followed the discussion but saw the hundreds of mails fly by on the
> topic.
Yep, kudos to Hans for his patience and persistence on this.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141201/7844607f/attachment.sig>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-12-01 16:38 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-11-23 16:35 [GIT PULL] Allwinner SimpleFB support for 3.19 Maxime Ripard
2014-11-28 14:05 ` Arnd Bergmann
2014-12-01 16:38 ` Maxime Ripard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).